• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.175-184
• /
• 2009

The distance of sensor nodes is an important factor in having influence on capability of networks in underwater acoustic sensor networks. Our proposed scheme is to establish an efficient distance to design a route of communication in underwater environment and it proposes a Level scheme that the areas divided by transmit/receive distance in network are given different levels. Our proposed scheme is pursued research to maintain a established route and maximize an energy efficiency. The established route will have fluid modification by an internal and external factors and it will construct more robust underwater sensor networks over our proposed multiple path configuration scheme.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.268-270
• /
• 2004

센서 네트워크는 제한된 메모리와 배터리를 가진 센서 노드로 구성되는 네트워크로서, 노드의 이동이나 장애로 인한 토폴로지 변화가 빈번하다. 이러한 센서 노드의 주소 할당에 있어서 기존의 방식들은 고정 주소를 할당하는 방식이므로 네트워크의 구성형태나 토폴로지의 변화에 맞게 주소를 변경하기 어렵다는 문제점이 있다. 이에 본 논문에서는 트리 기반의 동적 주소 할당 방식을 제안하였는데, 이는 초기에 트리 기반으로 생성된 노드 주소를 동적으로 할당하여, 라우팅 경로 등의 네트워크 변화에 따라 유동적으로 주소를 재할당한다. 메커니즘의 검증을 위해서는 ns-2 시뮬레이터를 사용하여 동작을 할인하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.107-110
• /
• 1998

차량의 주요 소음원부터 실내 탑승자의 귀의 위치까지 도달되는 소음의 전달에 대한 전체적인 경로 및 주파수특성에 대한 해석은 차량의 구조-음향적인 특성이 복잡하므로 매우 어렵다. 그러나, 중-고주파수에 대한 대책에 있어서는 흡차음재가 유용함은 이미 알려진 사실이다. 차실 벽면에 사용된 흡/차음재는 소음레벨에 부분적인 기여를 함은 물론이고 음질에도 영향을 미친다. 소음 레벨에 있어서는 수백 Hz 이하의 저주파수 성분이 주요하며, 음질에는 중-고주파수 대역의 소음특성이 큰 영향을 미친다[1]. 본 논문에서는, 실험적으로 측정된 소음원의 특성을 수치해석 모델에 이용하여 소음레벨 저감과 음질개선을 위한 흡/차음재의 개선방향을 모색하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.41.1-41
• /
• 2004

본 발표에서는, 최근 고속 고정밀 이송계로 각광을 받고 있는 리니어 모터의 열특성 분석과 구동부 설계변경을 통한 첨단 이송계의 열변형 억제 및 최소화 기술에 대해 다루고 있다. 리니어 모터의 공작기계에 적용 시, 리니어 모터의 발열원과 열전달 경로 등을 분석하고 이에 대응한 냉각기법과 단열재의 배치에 따른 고성능 이송계의 열특성 개선 사례를 소개한다. 새로운 리니어 모터의 공작기계에 적용은 선택사항에서 필수사항으로 이동한다.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.129-138
• /
• 2021

Today we are getting a lot of information and various activities on our website through the internet. These websites are maintained by individuals or by website specialists. The basic method is to change the files that make up the running website. Changing the entire file in this process takes a long time and changes the files that do not need to be changed, so the efficiency is greatly reduced. When only the files that need to be changed are changed, it takes a lot of effort as a person must manually search each path to check the files and change the files one by one. To solve this problem, automatic distribution systems were developed. Additional resources and learning are required, resulting in additional cost, time and labor. Therefore, in this paper, we propose an automatic update system to minimize resource consumption by using the resources and technologies of the existing website. The proposed system does not require learning new skills. This aims to improve reliability and reduce time compared to human work.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1245-1251
• /
• 1999

A 1.25Gb/s path control switch chip has been designed and implemented with COMPASS tool and 0.8${\mu}{\textrm}{m}$ CMOS gate-array of LG semiconductor. This device controls the path of digital singnals in SDH-based transmission system. The proposed switch chip is suitable for self-healing operations both in a linear network and an unidirectonal ring, The self-healing operation of the switch is effectively done by the configuration information stored in the resisters of the switch. The test device adapted to SDH-based transmission system, show immediate restoration and a 10-11~10-12 bit error raito. And 2.5Gb/s or more high throughput can be realized by combining rwo identical or more switches with the parallel architecture.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.14-19
• /
• 2009

In Mobile Ad-hoc Network, link failure and packet loss may occur frequently due to its nature of mobility and limited battery life. In this paper, an enhanced robust routing protocol based on AODV(Ad hoc On-demand Distance Vector routing) by monitoring variation of receiving signal strength is proposed. New metric function that consists of node mobility and hops of path is used for routing decision. For preventing route failure by node movement during data transmission, a new route maintenance is presented. If the node movement is detected, the routing agent switches local path to its neighbor node. Simulation results show that the performance of the proposed routing scheme is superior to previous AODV protocol.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.25-36
• /
• 2009

In this paper, we propose an efficient data management scheme for path queries and containment queries which are occurred frequently. The proposed data management scheme considers a change of the containment of products during a transport and supports a path of changed products by representing a path of various containments. Also, the compression utilizing the structure of supply chain reduces the stored data volumes. As a result, our method outperforms the existing methods in terms of storage efficiency and query processing time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.303-312
• /
• 2006

This paper presents the equivalent nodal load for the element stiffness which represents the influence of the stiffness change such as the addition of elements, the deletion of elements, and/or the partial change of element stiffness. The reanalysis of structure using the equivalent load improves the efficiency very much because the inverse of the structural stiffness matrix, which needs a large amount of computation to calculate, is reused in the reanalysis. In this paper, the concept of the equivalent load for the element stiffness is described and some numerical examples are provided to verify it.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.459-467
• /
• 2004

This paper presents an efficient reanalysis algorithm, named PRAS (Partial Reanalysis algorithm using Adaptable Substructuring), for the partially changed structures. The algorithm recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity_ The key procedures consists of 1) partitioning the whole structure into the changed part and the unchanged part, 2) condensing the internal degrees of freedom and forming the unchanged part substructure, 3) assembling and solving the new stiffness matrix from the unchanged part substructure and the changed members.