• Title/Summary/Keyword: 경로 계획 공유

Search Result 42, Processing Time 0.026 seconds

e-Navigation 경로 계획 공유 IT서비스의 유용성 평가

  • Sin, Il-Sik;Yu, Yeong-Ho
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2016.05a
    • /
    • pp.35-37
    • /
    • 2016
  • 최근 IMO에서는 e-Navigation IT서비스를 사용자 입장에서 평가하도록 인간중심설계(HCD, Human Centered Design) 활동에 기반을 둔 유용성 평가에 대하여 표준화 작업을 진행하고 있다. 만약 IT서비스를 유용성 평가 기법으로 수행한다면 문제점, 오류, 개선사항, 사용자 요구사항 등을 도출할 수 있다. 그러나 IT서비스에 대한 유용성 평가의 관련 연구는 거의 진행되지 않고 있다. 이유는 최근 국제표준 제정을 준비하고 있고 평가를 위한 도구 및 평가 척도, 방법에 대한 기준이 명확하지 않기 때문이다. 따라서 본 연구에서는 경로 계획 공유(Route Plan Exchange) e-Navigation IT서비스에 대하여 유용성 평가 과정을 수행하였다. 유용성 평가를 위해 평가도구, 평가 시나리오, 평가 척도, 평가 방법을 개발하고 항해사 대상으로 유효성(Effectiveness), 효율성(Efficiency), 만족성(Satisfaction)을 평가하였다.

  • PDF

Research on the Technology for MASS Arrival and Departure (자율운항선박 입출항 지원 기술에 관한 연구)

  • 김혜진;김동함;박정홍;강민주
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2023.05a
    • /
    • pp.74-75
    • /
    • 2023
  • 선박의 자율지능기술은 국방분야에서 무인화 기술 개발로 시작하여, 최근에는 해운분야에서 자율운항선박의 도입에 관심을 갖게 되면서 자율운항선박 관련 기술 개발이 활발히 이루어지고 있다. 자율운항선박이 해상 물류의 수단으로 사용화되기 위해서는 자율운항선박의 항만 입출항을 위한 기술적, 제도적 기반이 마련되어야 한다. 특히 항만 운영의 효율성을 높이고 자율운항선박의 안전 운항을 보장하기 위해서는 자율운항선박의 입출항을 위한 여러 기술이 개발되어야 한다. 본 연구에서는 자율운항선박의 입출항을 위해서 요구되는 기능을 식별하고, 요구 기능이 개발되기 위해서 고려되어야 하는 사항을 검토하였다. 자율운항선박의 입출항 지원을 위해서는 항만과 선박의 정보 공유 및 동기화가 선행되어야 하고, 고품질 정보를 기반으로 스케줄링 및 운항 경로 계획이 수립되어야 한다.

  • PDF

Pre-Planned Tree Reconfiguration Mechanism for QoS Multicast Routing (QoS 멀티캐스트 라우팅을 위한 계획된 트리 재구성 방법)

  • Han, Seung-Jae;Park, Sun-Ju
    • Journal of KIISE:Information Networking
    • /
    • v.34 no.2
    • /
    • pp.120-133
    • /
    • 2007
  • A multicast tree includes several, possibly a large number of, paths connecting source-receiver pairs, and network failure may disable part of the multicast tree. Reconstruction of the entire multicast tree to recover from a component failure is highly undesirable, because some group members have to suffer service disruptions even though the communication paths to/from them are not affected by the failure. To limit reconfiguration region and to maximize the likelihood of successful reconfiguration, we propose and evaluate a pre-planned reconfiguration policy for QoS multicast sessions. Specifically, we equip a reconfiguration path (RP) with each end-to-end path that connects a source-receiver pair in the multicast tree, and reserve resources in advance along the RPs. Efficient resource-sharing techniques are applied to reduce the amount of resources reserved for RPs but not used in the absence of failures. This way, we prevent uncontrolled competition among different multicast sessions which may simultaneously try to recover from failures. We evaluate the performance of the proposed scheme using simulation on randomly-generated networks. We use the shortest-path routing for QoS multicast sessions, and simulate both source-based and shared multicast trees. The evaluation results indicates that successful pre-planned reconfiguration can be achieved for all group members with reasonable overhead. Our scheme is also shown to adapt well to dynamic changes of group membership.

Time Disjoint Paths (TDP) - RWA on Scheduled Lightpath Demands in Optical Transport Networks (광 전달망에서 계획 연결 요구의 시간적 비공유 경로를 이용한 RWA)

  • Ahn Hyun Gi;Lee Tae-Jin;Chung Min Young;Choo Hyunseung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.11A
    • /
    • pp.979-986
    • /
    • 2005
  • In optical networks, traffic demands often demonstrate periodic nature for which time-overlapping property can be utilized in routing and wavelength assignment (RWA). A RWA problem for scheduled lightpath demands (SLDs) has been solved by combinatorial optimal solution (COS) and graph coloring, or heuristic sequential RWA (sRWA). Such methods are very complex and incurs large computational overhead. In this paper, we propose an efficient RWA algorithm to utilize the time disjoint property as well as space disjoint property through fast grouping of SLDs. The computer simulation shows that our proposed algorithm indeed achieves up to $54\%$ faster computation with similar number of wavelengths than the existing heuristic sRWA algorithm.

IPv6 기반의 정보 공유 P2P 개발

  • 이재준;김유정;안철현;이영로
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 2003.05a
    • /
    • pp.21-27
    • /
    • 2003
  • 분산컴퓨팅, 다자간 협업, 대용량 고품질의 컨텐츠 교환을 지원하는 P2P는 차세대 인터넷의 핵심 어플리케이션이 될 것이다. 본래 인터넷의 근본이었던 IP 라우팅도 P2P 방식이었다. 장비가 다양해지고, PC가 증가하게 됨에 따라 동적 IP를 사용하거나, 하나의 IP를 여러 사람이 공유하여 사용하는 복잡한 방식을 취하기 시작했다. 그러나 새로운 IP 주소들이 충분히 공급될 수 있다면, 하나의 장치 당 하나의 주소 체제가 다시 각광을 받게 될 것이고, 지금처럼 불규칙적인 동적 IP 주소를 활용하지 않아도 될 것이다. 그런 의미에서 IPv6는 풍부한 주소자원을 각 단말에 부여할 수 있어, IPv16 기반의 P2P 구축은 P2P의 성능을 최적화하는 방법이 될 것이다. 현재 P2P는 콘텐츠 공유 및 전달, 네트워크/장치(하드디스크, CPU) 리소스 공유, 다자간 원격협업, 검색, 호스팅 및 프로젝트 관리 등 다양한 방법으로 활용되고 있다. 2000년경부터 대두되기 시작한 P2P 애플리케이션은 지난 2년 동안 급속하게 늘어났으며, 특히 인터넷 사용자들은 컨텐츠를 공유/전달할 목적으로 P2P를 많이 사용하고있다. 그러나 컨텐츠의 공유에 있어 MP3, 동영상, 이미지의 전달 및 공유에 그치고 있어, P2P를 기업 환경에서 지식공유 및 전달을 위한 시스템으로 활용하는 경우는 아직 미약하다. 그러므로 본 논문에서는 조직 내에서 정보활용 능력을 제고하기 위한 방안으로 P2P 시스템을 정보 공유 시스템으로 팔용하고, P2P의 성능을 최적화 할 수 있는 IPv6 기반의 개발 방안을 제안하고자 한다. 본 IPv6 기반의 정보 공유 P2P는 IPv6 전문가 그룹을 통해 시범적으로 적응하는 것으로 시작해, 학교 및 연구소를 통한 정보지식 공유 그리고 기업 정보화 솔루션으로 활용 될 수 있다.을 제시한다. 이렇게 함으로써 최대한 고객 납기를 만족하도록 계획을 수립할 수 있게 된다. 본 논문에서 제시하는 계획 모델을 사용함으로써 고객 주문에 대한 대응력을 높일 수 있고, 계획의 투명성으로 인한 전체 공급망의Bullwhip effect를 감소시킬 수 있는 장점이 있다. 동시에 이것은 향후 e-Business 시스템 구축을 위한 기본 인프라 역할을 수행할 수 있게 된다. 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여 감염의 위험성을 증가시키지 않으면서 영구적인 신경학적 합병증을 일으키지 않았고 좋은 혈관 개존율을 보여주었다. 따라서 동맥 도관을 이용한 Off pump CABG는 관상동맥의 협착의 정도에 따라 효율적으로 시행 시 좋은 임상결과를 얻을 수 있을 것으로 생각된다.였다. 그러나 심근 기능이나

  • PDF

Analyzing Intention to Use Shared E-scooters Considering Individual Travel Attitudes : The Case of Seoul Metropolitan Areas (개인 통행성향을 고려한 공유 전동킥보드 이용의향 분석: 서울시를 중심으로)

  • Lee, Yoonhee;Koo, Jahun;Choo, Sangho
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.21 no.1
    • /
    • pp.1-16
    • /
    • 2022
  • Recently, e-scooters have been attracting attention as eco-friendly modes of transportation in cities due to an increasing interest in the environment. Accordingly, various studies on usage behavior are being conducted, but studies that reflect individual travel attitudes are insufficient. Therefore, this study surveyed commuters in Seoul and analyzed respondents' traveling attitudes through factor analysis. It also built a binary logistic regression model for the intention to use shared e-scooters to determine how individual travel behaviors are affected. In particular, the model results showed that age, the main mode of transportation (car), walking time to the bus stop, and four travel attitude variables (disutility of travel, preference to self-drive, internet/smartphone friendliness, and willingness to pay extra money for services) significantly affected the intention to use shared e-scooters. This study is expected to be used as basic data, with aspect to travel behavior, for the efficient operation and use of shared e-scooters in the future.

Factors Affecting Performance of the Activities Promoting Knowledge Exchanges in Industrial Clusters (산업클러스터 단위 지식경영에서 지식공유촉진활동의 성과영향요인 연구)

  • Cho, Sung-Eui
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.15 no.4
    • /
    • pp.515-533
    • /
    • 2012
  • Industrial cluster is adopted as a key policy for the development of regional and national economies in many developed or under-developing countries. The industrial cluster is basically concerned with knowledge sharing and exchanges among diverse functions such as firms, research institutions, and universities in a regional or innovation-network context. Therefore, activities to promote knowledge sharing and exchanges in an industrial cluster become very important activities to reach to the original purpose of an industrial cluster. In this study, factors affecting performance of those activities to promote knowledge sharing and exchanges in an industrial cluster are defined and the effects are examined through empirical study. For this research, surveys on enterprisers and employees in industrial cluster were conducted and statistical analysis methods such as correlation analysis, multiple regression analysis, and canonical correlation analysis were adopted for analyses.

  • PDF

A Study on the Introduction of Effective Route Exchange System in the VTS Area (해상교통관제해역 내 효과적 경로교환 체계 도입에 관한 연구)

  • Pak, Chae-Hong;Jung, Chang-Hyun;Park, Sung-Hyeon
    • Journal of Navigation and Port Research
    • /
    • v.38 no.3
    • /
    • pp.217-225
    • /
    • 2014
  • The system that covers gathering, integrating, exchanging, presenting and analyzing of information within ships and shores for the safety and security in Marine Environment is known as e-Navigation Policy. Northern Europe has been conducting research and development. It came up into a concept that deals with ship's route information between vessels as well as vessels to shores which is better known as route exchange system. The research showed substantial advantages on navigational safety by exchanging the route information between vessels in vicinity and vessels to shores. Therefore, upon the adaptation of route exchange System as a major function in integrated navigational system, the existing procedures in VTS could be changed for betterment. In this study, it was verified the effectiveness of route exchange system by the adaptation of a recent collision accident occurred in Korean coast and suggested that route exchange system which would be carried out by the discretion of VTS center in VTS area. Finally, it proposed the new functions for outstanding services and procedures of integrating traffic organization services on coastal VTS for an effective route exchange system in Korean coastal area.

Design and Implementation of Vehicle Delivery Planning System for the Improvement Logistics Services (물류 서비스 향상을 위한 배차계획 시스템의 설계 및 구현)

  • Lee Myeong-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.4
    • /
    • pp.587-593
    • /
    • 2006
  • Development of digital information and internet technology causes the changes of technology environments and companies, and the variety of customers needs has been dynamically changed in terms of integrating information system with customers satisfaction. Moreover a new logistics concept is needed through the sharing information between suppliers and consumers, which maximizes the customers service and its flexibility by changing functional-oriented to process-oriented. Many research papers on transportation studies have focused on the Vehicle Routing Problem (VRP) and Vehicle Scheduling Problem (VSP). However in the real world, it is known that it takes long time to build vehicle scheduling in the process of transporting the amount of orders from the logistics center to the vendors due to the realistic constraints. This paper presents a framework design for each process enabling delivery planning automatically using heuristic algorithm. In addition, an interactive delivery planning system is implemented utilizing the proposed algorithm.

  • PDF

Earthwork Plan Using the Precise 3D Topographic Data (3차원 정밀지형자료를 활용한 토공계획 개선)

  • Lee, Jin-Nyoung;Pyeon, Mu-Wook;Koo, Jee-Hee;Park, Jae-Sun
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.18 no.1
    • /
    • pp.63-72
    • /
    • 2010
  • In this study, an earth work design program which will improve the efficiency of earth work and enable to carry out the design using 3D Geospace-based earth work modelling in design stage was developed. Estimate of accurate earth work volume is achievable using 3D grid DEM, and based on this, a mass calculation chart was developed for movement of earth and equipment. In consideration for the resources for various construction equipments needed for civil engineering works, soil conversion and the passage is displayed. In addition, the result is restored in the form of open API-based KLM to make it possible for the users to identify the progress of the construction, thereby enhancing the intuitive understanding of three-dimensional visualization and making it easier to share the result of the analysis.