• Journal of Korea Multimedia Society
• /
• v.12 no.11
• /
• pp.1563-1571
• /
• 2009

In this paper, we propose a new boundary matching method for the temporal error concealment and a post processing algorithm for perceptual quality improvement of the concealed frame. Temporal error concealment is a method that substitutes error blocks with similar blocks from the reference frame. In conventional H.264/AVC standard, it compares outside pixels of erroneous block with inside pixels of reference block to find the most similar block. However, it is very possible that the conventional method substitutes erroneous block with the wrong one because it compares only narrow spatial range of pixels. In this paper, for substituting erroneous blocks with more correct blocks, we propose enhanced boundary matching method by comparing inside and outside pixels of reference block with outside pixels of erroneous block and setting up additional candidate motion vector in the fixed search range based on maximum and minimum value of candidate motion vectors. Furthermore, we propose a post processing method to smooth edges between concealed and decoded blocks without error by using the modified deblocking filter. We identified that the proposed method shows quality improvement of about 0.9dB over the conventional boundary matching methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.19-24
• /
• 1995

단순한 형상의 소음기는 평면파이론에 의해 비교적 간단하게 음향성능을 해석적으로 구할 수 있다. 그러나 소음기의 형상이 복잡해지거나 해석하고자 하는 주파수의 범위가 평면파의 차단주파수 이상이 될 경우 소음기 내부의 음장이 평면파에서 벗어나게 되어 평면파 이론에 의한 해석은 실제와 상당한 오차가 발생하게 되므로 음장에 대한 3차원 해석이 필요하다. 이론적으로 3차원 문제를 해석할 수 있는 경우는 형상이 극히 단순한 경우에 국한되므로 유한요소법(FEM), 경계요소법(BEM)과 같은 수치해석적인 방법이 이용되고 있다. 경계요소법은 적분 커넬(kernel)의 특이성(singularity) 문제가 있지만 대상 영역의 경계면만을 이산화함으로써 모델링에 소요되는 시간과 노력을 절약할 수 있으므로 음향문제 해석에 있어서 효율적인 방법이라고 할 수 있다. 본 연구의 목적은 3차원 경계요소법 프로그램을 개발하고 평면파이론에 의한 해석이 어려운 여러가지 형태의 소음기에 대한 음향성능을 예측하고 실험으로 검증하는것이다. 특히, 단일영역으로 해석이 불가능한 다공형 소음기에 영역분할법을 적용하여 계산하고 결과를 검토하였다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.747-757
• /
• 1999

본 논문에서는 가변구조제어기의 슬라이딩모드이득과 경계층두께(boundary layer thickness)를 신경망을 이용하여 계산하는 신경망 가변구조제어기를 제시한다. 제시된 방법은 신경망의 역전파오차 학습기능을 이용하여 슬라이딩모드이득과 경계층 범위를 계산할 수 있도록 신경망 제어기를 학습시킴으로써, 슬라이딩모드 제어법칙을 단순화 하고, 시스템 불확실성에 대하여 강인하며, 추적오차를 더욱 개선시킬 수 있다. 설계의 예와 시뮬레이션 결과를 통하여 제시된 방법에 대한 유용성을 보인다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.169-170
• /
• 2000

UAM(Urban Airshed Model)은 광화학 모델로써 미국에서 오존 모델링에 대한 좋은 신뢰성을 갖고있어 여러 도시에 많이 적용된 모델이다. 우리나라에도 이미 수도권 지역을 대상으로 김용국(1996), 최정희(1999)논문에 적용된 바 있다. 그러나 우리나라 적용사례에서 보면 측정농도와 모델결과 값의 차이가 큰 경우가 나타난다. 따라서 UAM 실행의 정확도를 높이기 위해 오존농도의 범위를 살펴보고, 대상 기간을 선정하여 UAM을 실행하고, 그 결과를 비교하였는바 그 원인을 밝히기 위하여 경계농도에 대한 고찰을 실시하였다. (중략)

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.199-204
• /
• 2009

In this paper, a method for determining the boundary conditions which derived from the random obstacles on the curves was presented. A simple computer program using this method is also developed. This determination method and program can be used for a good engineering tool in optimal curve design and an Radius-transition curve length $(R-L_t)$ combination within the permissible zone can be improved without any increased costs.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.65-73
• /
• 2012

Soil-rock interface, mainly founded in Granite region of Korea, is known as one of the important factor of the slope failure at the rainfall due to smaller shear strength than soil itself. However, research of the effect on slope stability by soil-rock interfaces is insufficient. Therefore, a series of direct shear tests were performed in order to investigate the effect of soil-rock interface on slope stability. The method of tests is to get sand itself and sand-artificial rock interface shear strength from different grain size of sands and artificial rock samples. The results of tests show that the friction angle of interface depends primarily on particle size and surface roughness. Interface friction angle ratio ${\mu}(={\delta}/{\Phi})$ is in the range of 0.75 ~ 0.96, this results indicate that interface friction angle is smaller than sand itself.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.59-68
• /
• 2015

As part of an effort to leap smart cadastre system by doing rearrangement of various mismatches in the land register, the cadastre renovation project is being recently conducted. In response to this demand, this paper proposes an image-based rapid parcel boundary demarcation plan using the high resolution aerial image with a GSD (Ground Sample Distance) of 5cm that matches to real ground boundary situation in residential area. To review the feasibility and accuracy of this proposed methodology, we compared the accuracy of parcel boundary point and parcel area extracted from the digital stereo plotting on the basis of results of cadastral boundary surveying and land register over the selected two test areas. The comparative accuracy result of all boundary points by digital stereo plotting is satisfied with accuracy requirement according to the criteria of the enforcement regulation of cadastral surveying, whereas it exceeded allowable error of ${\pm}0.07m$, more strictly specified in the Special Act on Cadastral Renovation. And about 20% of the total 70 parcels extracted by digital plotting are out of area tolerance in Jecheon study area, and 10% of the total 19 parcels in Suwon study area. The parcels exceeding accuracy limit are mostly due to the occlusion caused by building roof or eaves, and the obstacles such as trees existing on the boundary. Furthermore, an object identification is impossible in image because of vague boundary reference in case of nonexistence of man-made structures or natural features. Therefore, the utilization of boundary identification stickers is recommended as a solution for these types of land parcel.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.136-150
• /
• 2008

Many studies have been carried out for automatic extraction of building by LiDAR data or airphoto. Combining the benefits of 3D location information data and shape information data of image can improve the accuracy. So, in this research building recognition algorithm based on contour was used to improve accuracy of building recognition by LiDAR data and elaborate building boundary recognition by airphoto. Building recognition algorithm based on contour can generate building boundary and roof structure information. Also it shows better accuracy of building detection than the existing recognition methods based on TIN or NDSM. Out of creating buffers in regular size on the building boundary which is presumed by contour, this research limits the boundary area of airphoto and elaborate building boundary to fit into edge of airphoto by double active contour. From the result of this research, 3D building boundary will be able to be detected by optimal matching on the constant range of extracted boundary in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.204-207
• /
• 2011

본 논문에서는 경추 초음파 DICOM 영상에서 개선된 퍼지 시그마 기법을 이용하여 경부심굴곡근을 추출하고 두께를 측정하는 방법을 제안한다. 제안된 방법은 ROI 영역에서 Ends-In Search Stretching을 적용하여 명암 대비를 강조한다. Stretching된 ROI 영역에서 평균 이진화를 적용한 후, Blob 알고리즘을 적용하여 흉쇄유돌근과 경부심굴곡근의 후보 영역을 추출한다. 추출된 경부심굴곡근 후보 영역에서 경추의 위치 정보를 이용하여, 경추의 경계 영역을 검출한 후, Cubic Spline 보간법 알고리즘을 적용하여 스플라인 곡선을 추출한다. 스플라인 곡선 영상에서 상/하 탐색 알고리즘을 적용하여, 최대/최소 범위 영역을 설정한다. Stretching된 ROI 영역에서 최대/최소 범위에 해당하는 영역에 대해 개선된 퍼지 시그마 이진화를 적용한다. 적용된 영역을 Blob 알고리즘을 이용하여 잡음을 제거하고 Morphology 알고리즘을 이용하여 초음파 영상의 첫 번째 경추 기준점의 좌표 정보를 추출한다. 경추 기준점을 기준으로 두께 측정에 필요한 경부심굴곡근 후보 영역을 추출하고 개선된 퍼지 시그마 이진화 알고리즘을 적용한다. 개선된 퍼지 시그마 이진화 알고리즘이 적용된 영상에서 근막의 위치 정보를 이용하여 경부심굴곡근상단 경계선을 추출한다. 추출된 각 경추 객체에 DDA(Digital Differential Analyzer) 알고리즘과 Cubic Spline 보간법 알고리즘을 적용하여 경부심굴곡근의 하단 경계선을 추출한다. 추출된 경부심 굴곡근의 상/하단 경계선의 위치 정보를 이용하여, 측정에 필요한 경부심굴곡근을 추출한다. 제안된 방법을 경추 초음파 영상에 적용하여 경부심굴곡근을 추출한 결과, 기존의 경부심굴곡근추출 방법보다 효율적으로 경부심굴곡근을 추출하는 것을 확인할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3058-3068
• /
• 2014

This experimental research is aimed to apply a health promotion program based on Cox's interaction model to such college students as are on the brink of dyslipidemia, so as to investigate the effects of the program on the subjects' blood lipid indexes including total cholesterol (TC), triglyceride (TG), high-density lipoprotein (HDL), and low-density lipoproteins (LDL). The subjects are 39 in all including the experimental group comprising 20 and the control group comprising 19. The analyses applied include descriptive statistics using SPSS WIN 18.0, $X^2$-test, independent t-test, and paired t-test. By means of nursing interventions which are an element of client-professional interaction, the following were offered including health information (exercise management, dietary management, health education), emotional support (sharing of experiences, encouragement, self expression), decision-making controlling (counselling by phone), and professional/ technical abilities; and blood lipid indexes were measured before and after the interventions. The results of this research found that TC, TG and LDL decreased significantly and HDL increased significantly in the experimental group, which indicates that the health promotion program was effective.