• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.148-150
• /
• 2017

무인선은 사람이 탑승하지 않기 때문에 회수에 어려움이 있다. 본 연구에서는 무인선의 회수를 용이하도록 하기 위하여 히빙라인 발사장치를 개발하였고, 히빙라인 발사장치 이용에 대한 검증을 위하여 해상시험을 수행하였다. 무인선 회수 시스템은 히방리인 발사장치, 견인장치, 크레인-무인선 결합장치, 원격조종기로 구성되어 있고, 히빙라인 발사장치는 발사관, 원격 격발장치, 공기통, 견인탄과 히빙라인으로 구성되어 있으며, 히빙라인 발사장치는 원격조종기를 이용하여 모선에서 제어가 가능하다. 제작된 히빙라인 발사장치를 유인선에 설치하여 실제로 해상에서 사용이 가능한지 검토하였다. 히빙라인을 원격으로 발사하고 모선에서 크레인을 이용하여 무인선에 결합하는 해상시험을 수행하였으며, 해상시험을 통하여 히빙라인 발사장치의 유용성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.521-527
• /
• 2002

In this paper, we introduce a procedure to find design parameter for array coupled lines using 2-D finite element analysis. To extract design parameters using FE calculation, we set up several design conditions. In order to show the validity of our approach, we designed, simulated and fabricated a comb-line bandpass filter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2642-2648
• /
• 2010

The design of coupling and rectifying circuits for the maritime VHF digital modem is investigated in this paper. To monitor the transmitting power of the modem, a directional coupler which is used to extract a small fraction of the transmitter signal power, and a rectifying circuit which make DC voltage proportional to the coupled rf power are designed and fabricated. The parallel-coupled line coupler with directivity of above 25 dB at 160 MHz bands is designed and it is shown that the output voltage of the rectifying circuit is linearly changing from 0.85 V to 1.6 V when the transmitting power of the modem is varying from 1 W to 25 W. The proposed coupler and rectifying circuits are expected to be suitable for maritime VHF digital modem.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.547-552
• /
• 2007

In this paper, the coupled microstrip lines of hairpin type are applied to design a compact microstrip ring hybrid. When the gap decreases, three attenuation poles are created by coupling between the lines. The proposed structure can achieve a significant reduction of size and suppression of the harmonics. And it has the same frequency responses of conventional ring hybrid at 2.55 GHz. The harmonics are suppressed to below -20 dB up to 12 GHz, including the third harmonic. The ring part size of the proposed ring hybrid is reduced to one forth of the conventional ring hybrid. The measured frequency responses agree well with simulated ones.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.80-90
• /
• 1995

The scattering parameters of a microstrip single line, a right-angle bend and a coupled line are calculated using the multiport network model for the frequency range from 1 to 18 GHz. The single line is analyzed using the planar waveguide model. The right-angle bend is broken into two rectangular segments, and each segment is analyzed in a similar fashion as the single line. Impedance matrices corresponding to the two segments are combined by the segmentation method. In the analysis of elec- tromagnetic coupling of the coupled line, a new method is employed resulting in much less computation time than those previous methods involving Green's functions. A good agreement between the numerical results for the three structures and those from SuperCompact reveals the usefulness of the multiport network medel in analyzing complicated mirostrip single and coupled line discontinuities.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.94-100
• /
• 2002

In this paper, we proposed a 3 dB coupler using N-section parallel-coupled lines and designed a very compact one based on the analysis results. The coupled line has been analyzed by spectral domain method. After we obtain the s-parameters of N-section parallel-coupled lines by using port reduction method 4-port s-parameters are derived. The 3 dB couplers, which were fabricated, are not necessary to implement high impedance lines and tight coupling gaps as Lange Couplers because loose coupling is used. To realize a minimum section, we used the PCB that has high a dielectric constant and a thickness. The experimental results show that it has wide bandwidth of about 42 %(0.5 dB unbalance) from 3.6 GHz to 5.5 GHz and phase difference within 1 degree. Also, The isolation characteristics about 15 dB at its pass-band are obtained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.290.2-290.2
• /
• 2013

X-선 튜브는 의료 영상 및 치료, 산업용 제전 장치, 비파괴 X-선 영상 장치 등에서 사용되는데 기존의 열전자원을 이용한 X-선 튜브와는 달리, 냉음극형 X-선 튜브는 빠른 속도의 디지털 구동이 가능하며 전력 소비가 낮은 장점이 있다. 따라서, 최근 많은 연구자들에 의해서 냉음극형 X-선 튜브에 관한 연구가 활발하게 진행되고 있다. 냉음극형 X-선 튜브는 전계 방출을 이용한 전자원을 사용하며, 탄소나노튜브 (CNT), Si, 다양한 종류의 나노선 등이 대표적이다. 그 중에서 CNT는 높은 종횡비로 인해 전계 방출 특성이 우수하여 가장 대표적인 물질이다. CNT를 이용한 전자원을 제작하기 위해서는 직접 성장법, 전기영동법, 스크린 프린팅법, 디핑법 등 다양한 방법이 존재한다. 직접 성장법을 제외한 방법들은 모재료인 CNT와 용매, 금속재료들을 섞어 페이스트나 수용액의 상태를 제작하여야 한다. 이 때, 금속 재료는 기판과 CNT간의 접착 및 전자 전도 통로의 역할을 하는 무기 충전제이며 일반적으로 나노 혹은 수 마이크로미터 크기의 상태로 존재하는 것을 주로 사용한다. X-선 튜브 제작은 일반적으로 외벽을 유리 혹은 세라믹을 주로 사용하는데 아노드 전극 및 캐소드 전극 등과 결합하여 진공 밀봉된 형태가 되어야 한다. 브레이징 방법은 금속과 세라믹을 결합하는데 매우 유용한 방법이며, 그 중에서도 진공 브레이징 방법은 다량의 부품을 한 번에 결합시킬 수 있다. 하지만 진공 브레이징 공정의 온도는 약 $700{\sim}1,000^{\circ}C$이며 이는 금속 재료가 충분히 증발할 수 있는 온도가 된다. 본 발표에서는 고온 진공 상태에서의 무기 충전제의 증발에 대한 현상을 관찰하고 고온진공 상태에서 증발없이 무기 충전제로의 역할을 할 수 있도록 다양한 금속 및 합금에 대한 연구를 수행하였다. 또한, 이 연구를 통해 선택된 무기 충전제를 포함하여 CNT 페이스트를 볼밀링 방법을 이용하여 제작하였으며, 이를 이용한 CNT 에미터가 X-선 튜브의 전자원으로 사용될 수 있는지 확인하기 위해 전계 방출 실험을 함께 실시하였다. 제작된 CNT 에미터가 우수한 전계 방출 특성을 가지고 있음을 확인하였으며, 이는 본 연구를 통해 선택된 금속 및 합금 재료가 무기 충전제로의 역할을 잘 수행하고 있음을 보여준다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.639-647
• /
• 2007

This paper proposed the novel method that can realize the parallel coupled line(PCL) band-pass filter with directly coupled feeding structure by means of transforming the first and last PCL sections of the conventional PCL band-pass filter into K-inverters, then substituting T-type equivalence for K-inverter. The proposed method supplies simple design formulae and can considerably reduce time and efforts needed to optimize filter performance when compared to reported methods using external Q or equivalent parameters. On the basis of the proposed method, the band-pass filter using directly coupled feeding structure and having 18% fractional bandwidth was designed and fabricated. The validity of proposed method was proven by the measured result.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.16-22
• /
• 2013

A general characterization procedure based on the extraction of a 2n-port admittance matrix corresponding to n uniform coupled lines on the multi-layered substrate using the Finite-Difference Time-Domain (FDTD) technique is presented. In this paper, the frequency-dependent normal mode parameters are obtained from the 2n-port admittance matrix to analyze multi-layered asymmetric coupled line structure, which in turn provides the frequency-dependent propagation constant, effective dielectric constant, and line-mode characteristic impedances. To illustrate the technique, several practical coupled line structures on multi-layered substrate have been simulated. Especially, embedded conductor structures have been simulated. Comparisons with Spectral Domain Method are given, and their results agree well. It is shown that the FDTD based time domain characterization procedure is an excellent broadband simulation tool for the design of multiconductor coupled lines on multilayered PCBs as well as thick or thin hybrid structures.