• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.35-44
• /
• 2012

Most recent infrared (IR) sensors have a focal-plane array (FPA) structure. Spatial non-uniformity of a FPA structure, however, introduces unwanted fixed pattern noise (FPN) to images. This non-uniformity correction (NUC) of a FPA can be categorized into target-based and scene-based approaches. In a target-based approach, FPN can be separated by using a uniform target such as a black body. Since the detector response randomly drifts along the time axis, however, several scene-based algorithms on the basis of a video sequence have been proposed. Among those algorithms, the state-of-the-art one based on Kalman filter uses one-directional warping for motion compensation and only compensates for offset non-uniformity of IR camera detectors. The system model using one-directional warping cannot correct the boundary region where a new scene is being introduced in the next video frame. Furthermore, offset-only correction approaches may not completely remove the FPN in images if it is considerably affected by gain non-uniformity. Therefore, for FPN reduction in IR videos, we propose a joint correction algorithm of gain and offset based on bi-directional warping. Experiment results using simulated and real IR videos show that the proposed scheme can provide better performance compared with the state-of-the art in FPN reduction.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.16-22
• /
• 2013

A general characterization procedure based on the extraction of a 2n-port admittance matrix corresponding to n uniform coupled lines on the multi-layered substrate using the Finite-Difference Time-Domain (FDTD) technique is presented. In this paper, the frequency-dependent normal mode parameters are obtained from the 2n-port admittance matrix to analyze multi-layered asymmetric coupled line structure, which in turn provides the frequency-dependent propagation constant, effective dielectric constant, and line-mode characteristic impedances. To illustrate the technique, several practical coupled line structures on multi-layered substrate have been simulated. Especially, embedded conductor structures have been simulated. Comparisons with Spectral Domain Method are given, and their results agree well. It is shown that the FDTD based time domain characterization procedure is an excellent broadband simulation tool for the design of multiconductor coupled lines on multilayered PCBs as well as thick or thin hybrid structures.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2019.08a
• /
• pp.292-292
• /
• 2019

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.159-169
• /
• 2020

A cold chain logistics (CCL) model for chilled food (-1℃ to 8℃) distributed in China was developed in this study. The CCL model consists of a distribution center (DC) and distribution target points (DT). The objective function of the CCL model is to minimize the total distribution routes of all distributors. To find the optimal result of the objective function, the hybrid genetic algorithm (HGA) approach is proposed. The HGA approach was constructed by combining the improved K-means and genetic algorithm (GA) approaches. In the case study, three scenarios were considered for the CCL model based on the distribution routes and the available distance, and they were solved using the proposed HGA approach. Analysis results showed that the distribution costs and mileage were reduced by approximately 19%, 20% and 16% when the proposed HGA approach was used.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.147-160
• /
• 2013

이 논문은 공정변화를 보다 잘 감지할 수 있는 관리도의 개발동향에 주안점을 두고 있으며, 경제적 접근법으로 관리모수를 설정하여 공정관리 메카니즘을 사용하는데 있어서 최소의 비용을 가지도록 하여 품질 향상 비용을 절감시킬 수 있는 설계 접근방법을 조사 연구했다. 또한 CUSUM 관리도를 기존의 다양한 관리도와 결합하여 개발된 새로운 관리도를 비교했다. 비교된 관리도의 경제적 모형설계를 통하여 공정 품질에서의 경제적인 영향의 최적화를 위한 관리모수를 제시했다. 이는 공정평균의 이동을 감지하기 위한 결합 관리도를 개발하는 경제적설계 절차를 제시했다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.329-338
• /
• 2021

This study predicts the amount of wind power generation for rational operation plan of wind power generation and capacity calculation of ESS. For forecasting, we present a method of predicting wind power generation by combining a physical approach and a statistical approach. The factors of wind power generation are analyzed and variables are selected. By collecting historical data of the selected variables, the amount of wind power generation is predicted using deep learning. The model used is a hybrid model that combines a bidirectional long short term memory (LSTM) and a convolution neural network (CNN) algorithm. To compare the prediction performance, this model is compared with the model and the error which consist of the MLP(:Multi Layer Perceptron) algorithm, The results is presented to evaluate the prediction performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.411-411
• /
• 2010

Cavity mode Whistler wave를 사용하는 자화유도결합플라즈마 (Magnetized Inductively Coupled Plasma, MICP)의 제반 특성을 비등방성 수송계수를 가지는 Drift-Diffusion 근사, 에너지 보존 방정식 및 유도전자계를 self-consistent 하게 고려하여 계산하였다. 이러한 접근법은 비충돌성 전자가열현상을 고려하지 못하는 단점에도 불구하고, 반도체 장비설계에 필수적인 전자온도, 밀도, 플라즈마 전위, 시스템의 임피던스 특성에 대한 경향성 파악에 매우 유용하다. 뿐만 아니라 전자밀도분포가 공간내에 형성되는 R-wave mode에 미치는 영향을 분석할 수 있다. 직경 320 mm를 가지는 작은 반응기에서 시뮬레이션과 실험결과를 비교하여 본 모델링 방법의 타당성을 검증한 후, 450 mm wafer가공에 적합한 대면적 플라즈마 반응기에서 플라즈마 특성을 연구하였다. 수 mTorr의 공정압력에서 약 10 Gauss전후의 약한 자장이 인가됨으로서 반경방향의 전자밀도 균일성이 대폭 향상되었다. 플라즈마 및 안테나의 대면적화에 수반되는 높은 Q값이 자장의 인가로 큰 폭으로 감소함으로서 임피던스메칭의 안정성이 비약적으로 개선되었고 전력전달 효율 또한 크게 증가함을 알 수 있었다. 본 연구 결과는 차세대 450 mm 반도체 공정장비의 개발에 있어 자화유도결합플라즈마가 매우 유용하게 사용될 수 있음을 보여준다.

• Journal of the Korean association of regional geographers
• /
• v.6 no.3
• /
• pp.169-184
• /
• 2000

Industrial clusters and their boundaries are identified by factor and hot spot analyses for the greater Cincinnati metropolitan area in USA. While traditional input-output approach identified aspatial industrial clusters, this study combines traditional approach with GIS techniques to identify their boundaries. Combining the results of input-output industrial clusters with the leading industries groups, we have identified five leading industry clusters. They are food (20), chemicals (28), metal manufacturing (32), metal products (33), and machinery (35). We also used hot spot analysis to visualize each industry cluster on the research area by using Arcview software. Determining the degree to which such industries are associated spatially and their spatial delimitation may be an additional approach to measuring the efficiency of the spatial organization of an economy. It is hoped that the industrial clusters and industrial spatial clusters approaches may also proved the basis for the development of new models of the spatial arrangement of industry at a level more aggregated than that of the single plant or firm.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.6
• /
• pp.1-5
• /
• 1983

A new equation, which enables us to calculate the characteristics of coupled slot-lines on a dielectric substrate, is derived. Their calculations are based on the single slot-line analysis of S.B. Cohn, but each equation of total admittance in the even mode and the odd mode is derived by a different approach. The results agree with Knorr and Kuchler's data.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.141-157
• /
• 2007

This paper evaluates the effects of privatization and deregulation on the firm-specific efficiency and total factor productivity (TFP) growth in the Korean and Japanese railways. Using a stochastic frontier approach and a generalized translog functional form, the paper specifies the equation system consisting of a multiproduct variable cost function and input share equations which is estimated with Zellner's iterative seemingly unrelated regression and the corrected least squares method. The Korean and Japanese railway firms are assumed to produce three outputs (Shinkansen passenger-kilometers, incumbent railway passenger-kilometers, ton-kilometers of freight) using three input factors (labor, fuel, maintenance and rolling stock). A monetary value of the ways and fixed installations held by the railroad firm is also included as a quasi-fixed input. The empirical results indicate that the average estimate of cost inefficiency is 2.57% for the total sample and on the average, JNR and JR Kyushu are found to be worst efficient while the most efficient railway firm in the sample is JR West. Also the cost efficiency levels of seven JRs have been improved after the reform and privatization of JNR. The findings also indicate that TFP growth of the privately-owned JRs are higher than those of the government-owned KNR and JNR. Three-island JRs and JR Freight have slightly higher TFP growth than Honshu JRs as well. Thus, the results suggest that managerial autonomy and increased competition via deregulation have improved efficiency and TFP growth.