• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.184-192
• /
• 2019

Compared to 31-mode rings, 33-mode rings are highly utilized as wide bandwidth underwater acoustic transducers because the electro-mechanical coupling and piezoelectric constant d are high. On the other hand, the 31-mode ring is an axial symmetry structure, so it is possible to model it as a simple two-dimensional asymmetrical model for numerical analysis, but the 33-mode ring requires a three-dimensional numerical analysis. That is, a lot of computing resources and computation time are required. In this study, the effective material properties of an equivalent 31-mode ring were derived to simulate the electro-mechano-acoustical responses of the 33-mode ring transducer. Using the effective material properties derived from this study, a numerical analysis of rings in vacuum, air backed rings in water, and FFR (Free Flooded Ring) transducers were performed to compare the responses of 33-mode rings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.191-196
• /
• 1995

지지부에 비틀림 하중을 받는 Elstica는 비틀림 운동을 하며, 그 가진 주파수가 굽힘모드 근처일 때는 해당하는 굽힘 모드의 운동까지도 동시에 존재하게 된다. 이때 가진력의 크기가 작을때는 주기적인 운동이 된다. 가진력의 크기가 증가함에 따라 굽힘 운동은 굽힘 1차 모드와 연성된 유사주기운동이 발생하며, 이떤 범위 이상이 되면 굽힘 운동과 비틀림 운동이 결합된 진폭이 매우 크고 불규칙적인 비평면 운동(out of plane motion)이 발생하게 되며 이 때의 운동은 혼돈운동이다. Elastica가 굽힘 3차 고유진동수 근방의 주파수로 비틀림 하중을 받을 때의 정확한 이론적 해석을 위해서는 굽힘 3차모드 까지는 반영할 수 있는 식이 모델링 되어야 할 것으로 보인다. 이것은 복잡한 비평면운동을 할 때 굽힘 3차 모드까지 관찰된다는 사실에 근거한다.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.342-344
• /
• 2006

전동기 구동시스템의 사양 결정과 설계를 위해서는 부하의 부하토크, 관성계수, 마찰계수 등의 정보에 의한 부하 모델링이 반드시 필요하다. 전동지게차 시스템의 모델링을 위해서는 차체의 중량과, 바퀴의 제원 등 제한적인 정보를 기초로 하여 번거로운 계산과정을 거쳐야 하지만 정확한 정보를 얻기에는 어려움이 따른다. RecurDyn은 기계시스템의 모델링과 시뮬레이션을 하는 3차원 해석이 가능한 Functionbay사에서 개발한 시뮬레이션 프로그램으로서 3D의 기계적인 형상을 작성하고, 물성을 입력하면 부하토크, 등가 관성계수, 마찰계수를 출력할 수 있어 전동기구동시스템의 시뮬레이션 프로그램인 Matlab/Simulink와 결합하여 시뮬레이션을 수행 할 경우 부하 모델링 없이 전체 구동시스템의 특성 시뮬레이션이 가능하다. 본 논문에서는 영구자석 동기전동기로 구동하는 전동지게차 시스템을 대상으로 RecurDyn 프로그램의 활용을 소개하고 Matlab/Simulink를 이용한 결함 시뮬레이션의 가능성을 보고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.89-89
• /
• 2022

하천 합류부에 지천이 유입되는 경우 복잡한 3차원적 흐름 구조를 발생시키고 이로 인해 유사혼합 및 지형 변화가 활발히 발생하게 된다. 특히, 하천 합류부에서 부유사 거동은 하천의 세굴과퇴적, 하천 지형 변화, 하천 생태계, 하천구조물 안정성 등에 직접적으로 영향을 미치기 때문에 이에 대한 정확한 분석이 하천 관리 및 재해 예방에 필수적인 요소이다. 기존의 하천 합류부 부유사 계측 자료들은 재래식 채취 방식으로 수행되어 시공간적 해상도가 매우 낮아서 실측 자료만으로 합류부에서 부유사 혼합을 분석하기에는 한계가 존재하기에 대하천의 부유사 혼합 거동 해석에 수치모형이 주로 활용되어 왔다. 본 연구에서는 하천 합류부에서 부유사 거동을 공간적으로 정밀하게 분석하기 위해 드론 기반초분광 영상을 활용하여 하천 합류부에 최적화된 부유사 계측 방법론을 제시하였다. 현장에서 계측한 초분광 자료와 부유사 농도간의 관계를 구축하기 위하여 기계학습모형인 랜덤포레스트(Random Forest) 회귀 모형과 합류부에서 분광 특성이 다른 두 하천의 특성을 정확하게 반영하기 위한 가우시안 혼합 모형 (Gaussian Mixture Model) 기반 초분광 군집화 기법을 결합하였다. 본 연구에서 구축한 방법론을 낙동강과 황강의 합류부에 적용한 결과, 초분광 군집을 통해 두하천 흐름의 경계층을 명확히 구별하였으며, 이를 바탕으로 지류와 본류에 대해 각각 분리된 회귀 모형을 구축하여 복잡한 합류부 근역 경계층에서의 부유사 거동을 보다 정확하게 재현하였다. 또한 나아가서 재현된 고해상도의 부유사 공간분포를 바탕으로 경계층에서 강한 두 흐름이 혼합되어 발생한 와류(Wake)가 부유사 혼합에 미치는 영향을 규명하였고, 하천 합류부에서 발생하는 전단층의 수평방향 대규모 와류가 부유사 혼합 양상에 지배적 영향을 미치는 것으로 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.61-73
• /
• 2008

Piles of a bridge pier are connected with the column through the pile cap (footing). Behavior of the pile foundation can be different according to the connection method between piles and the pile cap. Connection methods between pile heads and the pile cap are divided into two groups : rigid connections and hinge connections. Domestic design code has been specified to use rigid connection method for the highway bridge. In the rigid connection method, maximum bending moment of a pile occurs at the pile head and this helps the pile to prevent the excessive displacement. Rigid methods are also good to improve the seismic performance. However, some specifications prescribe that conservative results through investigations of both the fixed-head condition and the free-head condition should be reflected in the design. This statement may induce an over-estimated design for the bridge which has high-quality structures with casing covered drilled shafts and the PC-house contained pile cap. Because the assumption of free-head conditions (hinge connections) is unreal for the elevated pile cap system with multiple piles of the long span sea-crossing bridges. On the other hand, elastic displacement method to evaluate the pile reactions under the pile cap is not suitable for this type of bridges due to impractical assumptions. So, full modeling techniques which analyze the superstructure and the substructure simultaneously should be performed. Loads and stress state of the large diameter drilled shaft and the pile cap for Incheon Bridge which will be the longest bridge of Korea were investigated through the full modeling for rigid connection conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.107-115
• /
• 2001

It is required more precise analysis for practical load because of complexities and varieties of vehicle structure. To establish the numerical model, many researchers have been developed designing tools for linking F.E. Analysis results and experimental results. There studies have generally focused on each experimental method or analytical method separately. There are few studies based on both methods. This paper conceives new procedure for the determination of the load direction and magnitude applied on mechanical structures. New procedure is the combination of the analytical and empirical method with analyzed strain by F.E. Analysis under unit load and with measured principal stress by strain gages under driving load, respectively. In this paper, we theorize the procedure of practical load determination and make the validity and the practicality of the procedure with the application to T-shape jointed structure. F.E. Analysis is conducted to get the principal stress on arbitrary points in the F.E. model of T-shape joint under unit load. Then experiment is carried out to get the principal stress on the same points of F.E. model. To demonstrate the actual driving condition, the load conditions are bending and torsion. From these two data sets, the magnitude, the direction and the position of load can be obtained. Theory and practice do not always coincide; since there are some errors such as ill-poseness, measuring error and modeling error in experimental data, we examine the proper method of error minimization.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.361-367
• /
• 2014

In this paper, task scheduling and load balancing methods of multifrontal solution methods of finite element structural analysis in a modern multicore machine are introduced. Many structural analysis problems have generally irregular grid and many kinds of properties and materials. These irregularities and heterogeneities lead to bottleneck of parallelization and cause idle time to analysis. Therefore, task scheduling and load balancing are desired to reduce inefficiency. Several kinds of multithreaded parallelization methods are presented and comparison between static and dynamic task scheduling are shown. To reduce the idle time caused by irregular partitioned subdomains, computational load balancing methods, Balancing all tasks and minmax task pairing balancing, are invented. Theoretical and actual elapsed time are shown and the reason of their performance gap are discussed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.30-42
• /
• 2010

The effects of internal waves on dynamics of hypoxic waters were investigated by numerical simulation by means of a hydrostatic-ecosystem coupled numerical model for Lake Biwa. The numerical model consists of hydrostatic and ecosystem submodels. Numerical simulation was carried out for a period during April 2007 and March 2008, after preliminary numerical simulation for three years. As a result, the numerical model could capture the vertical profiles of the observed water quality. During September 30 and October 21 in 2007, the major internal waves were Kelvin and Poincare waves, the periods of which were 1.63 or 1.77 days and 0.48 days, respectively. Hypoxic waters appeared in bottom boundary layer around October and were still when thermocline locates in upper layer. During late autumn and winter seasons, differences in density between upper and lower layers were reduced and the amplitude of internal waves increased. Hypoxic waters began to move under the effects of internal waves. Movement of hypoxic waters will diminish the habitat for aquatic organisms in deeper waters.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2006

This paper proposes a new method that reduces the complexity of the combined system, which consists of the selective mapping(SLM) and the partial transmit sequence(PTS) in the Orthogonal Frequency Division Multiplexing(OFDM). In order to reduce the Peak-to-Average Power Ratio(PAPR), many techniques have been developed such as SLM and PTS. and their combined systems. However the method that simply combines PTS and SLM to improve the effectiveness of a system increases the complexity of calculation. The scheme employed in this research suggests a system that combines PTS and SLM reducing the complexity via the N($N=2^n$)-point inverse fast Fourier transforms(IFFT), which uses the decimation in time domain not only to improve PAPR but also to reduce the amount of calculation. The proposed method reduces the complexity by multiplying a phase sequence and a subblock index to the data sequences in the middle of IFFT, which yields an optimal sequence with minimal PAPR. The superiority of the proposed method is demonstrated by simulation results and analysis.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2023

This paper proposes a tri-band bandpass filter using dual-mode stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with open stubs and parallel coupled lines (PCLs) that have inter-digital and comb-line shorted ends. Two U-shaped SIRs with open stubs build the first and third passband, and the central PCL resonators build the second passband. Five resonators and coupling structures are theoretically analyzed to derive the scattering parameters of the proposed filter. A novel tri-band bandpass filter is designed and fabricated using the induced scattering parameters. The measured result of the fabricated tri-band bandpass filter shows a good agreement with the simulated one.