• Title/Summary/Keyword: 결함 위치 추정

Search Result 1,523, Processing Time 0.033 seconds

A study of the cause of metal failure in treatment of femur shaft fracture - Fractographical and clinical analysis of metal failure- (대퇴골 간부 골절시 사용한 금속물의 금속부전(Metal failure)의 기전에 대한 연구)

  • Jeon, Chun-Bae;Seo, Jae-Sung;Ahn, Jong-Chul;Ahn, Myun-Whan;Ihn, Joo-Chyl
    • Journal of Yeungnam Medical Science
    • /
    • v.7 no.1
    • /
    • pp.81-93
    • /
    • 1990
  • The author fractographically analyized the cause of metal failure(the first time this procedure has been used for this metal failure)and also analyized it clinically. In this study, I selected eight cases which have been analyized fractographically. In all these cases, the analysis was done after treatment of metal failure of implants internally fixed to femur shaft fractures at the Department of Orthopedic Surgery, Yeung-Nam University Hospital during the six year period from May 1983 to September 1989. 1. Metal failure occured in five dynamic-compression plates, one Jewett nail, one screw in Rowe plate, and one interlocking nail. 2. The clinical cause of metal failure was deficiency of medial butress in five cases, incorrect position of implant in one case, and incorrect selection of implant in two cases. 3. The time interval between internal fixation and metal failure was four months in one case, between five months to twelve months in six cases, three years in one case. 4. The fractographically analytical cause of metal failure was ; first, impact failure, one case, second, fatigue failure, six cases, machining mark(stress liser), four cases type : low consistent cyclic fatigue failure irregular cyclic fatigue failure third, stress corrosion crack, one case. 5. 316L Stainless Steel has good resistance to corrosion. However, when its peculiar surface film is destroyed by fretting, it shows pitting corrosion. This is, perhaps, the main cause of metal failure. 6. It is possible that mechanical injury occured in implants during the manufacturing of implants or that making a screw hole is the main cause of metal failure.

  • PDF

A reevaluation of the castles and palaces of Goryeo Gangdo (江都) using GIS (고려 강도(江都)의 성곽과 궁궐 재고찰)

  • KANG, Dongseok
    • Korean Journal of Heritage: History & Science
    • /
    • v.54 no.4
    • /
    • pp.174-191
    • /
    • 2021
  • Gangdo (江都), a reproduction of Gaegyeong, was the capital of Goryeo for 39 years. However, due to the urgent wartime situation of the Mongol invasion and the geographical features of Ganghwa Island, the castle system and palace layout were somewhat different from those of Gaegyeong. Gangdo's castle can be understood as a triple castle system consisting of outer castle, middle castle, and inner castle. First, the outer castle was the first to be completed, and it was built at the forefront to prevent the Mongol army from invading in the first place. It is presumed that the section was between Huamdon and Hwadodon in the outer castle during the Joseon Dynasty. The middle castle can be seen as the present 'Middle Castle', a castle built of earth on the outskirts of the Ganghwa-mountain Castle. Considering the sophistication and robustness of the construction method confirmed in the archaeological research, this castle is thought to have been built under a meticulous plan. In other words, as the capital city, it was completed 'at last' as recorded in the Koryo History, after a long 18-year construction process to protect palaces, government offices, and private houses. The inner castle was a castle with the character of a palace. This corresponds to the Old Castle of Ganghwabu (江華府) during the Joseon Dynasty, and it almost coincided with the scale of the composition of Gaegyeong's palace castle. It was a complex functional space, featuring the integration of the palace and the imperial castle, where the main government offices and ancillary facilities, including the palace, were located. Based on the documentary record that these palaces were similar to Gaegyeong's palace, the palace map was overlapped with that of Gaegyeong. The central axis of the building from Seungpyeongmun (昇平門) to Seongyeongjeon (宣慶殿) coincided with Kim Sangyongsunjeol Monument in Ganghwa- Goryeo Palace. Therefore, it seems that the palace of Gangdo had the same basic structure as that of Gaegyeong. However, the inner palace and annexed buildings must have been arranged in consideration of the topographical conditions of Ganghwa, and this is estimated to be the Gunggol area in Gwancheong-ri.

Study on the Expression of Matrix Metalloproteinase-1 by Promoter Polymorphism in Human Dermal Fibroblast (섬유아세포에서 프로모터 다형성에 의한 Matrix Metalloproteinase-1의 발현에 관한 연구)

  • Lee, Jin Woo;Jung, Yujung;Bong, Sim-Kyu;Park, No-June;Lee, Sang Heon;Noh, Minsoo;Lim, Kyung-Min;Kim, Su-Nam
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.47 no.3
    • /
    • pp.205-212
    • /
    • 2021
  • The skin fibroblasts of different origins showed different expression levels of MMP-1 in response to TNF-α treatment or UV irradiation. We hypothesized that this is caused by polymorphism in the MMP-1 promoter region. To elucidate it, first of all, we analyzed and classified the genotype of the -1607 site of the MMP-1 promoter in 23 commercially available primary fibroblasts, and then we examined the expression of MMP-1 by TNF-α or UVB stimulation for each classified genotype. As a result of the analysis, fibroblasts with 6 1G/1G genotypes, 10 1G/2G genotypes, and 7 2G/2G genotypes were identified. Hs68 and Detroit 551 cell lines were confirmed to have 1G/2G genotypes. In the 1G/1G genotype, MMP-1 was expressed twice as high as that of the control group by TNF-α treatment, and was hardly expressed by UV light. In the case of the 1G/2G genotype, MMP-1 was expressed 2.45 fold higher by TNF-α treatment, and 1.4 fold by UV light than the control. In the case of the 2G/2G genotype, MMP-1 was expressed 1.35 fold by TNF-α treatment, and was highly expressed by 2.5 fold by ultraviolet rays compared to control. It can be estimated that MMP-1 expression is better induced in the 1G genotype by TNF-α and in the 2G genotype by UV light. In addition, it can be presumed that MMP-1 expression is increased by creating a site where the Ets transcription factor can bind by another G inserted at the -1607 position. These studies have not been conducted at all in fibroblasts in relation to skin aging, so it is an area that needs to be further studied in the future. In conclusion, since the skin is an organ that is affected by both intrinsic aging and photoaging at the same time, when analyzing the expression of MMP-1 as a target for improving skin aging, it is necessary to select cells with a genotype suitable for the experimental conditions of the study.

A Study on Production Kiln Site Estimation, based on Historical Ceramic Characteristics and Scientific Analysis of the Celadons Excavated From the Beopcheon Temple Site and Son-gok 2-ri 4th Kiln Site (법천사지 청자와 손곡2리 4호 가마터 청자의 도자사적 성격과 과학적 분석을 통한 생산 가마터 추정 연구)

  • Lee, Byeong-hoon;Yun, Seok-in
    • Korean Journal of Heritage: History & Science
    • /
    • v.47 no.3
    • /
    • pp.24-41
    • /
    • 2014
  • Since the celadons excavated from the Son-gok 2-ri 4th kiln site are located in the Beopcheon temple site and at close range, the similarity to the celadons excavated from the Beopcheon temple site is being raised. Thus, this study examined the correlation using a natural-scientific method. In this study, historical ceramic properties of total 19 celadons were examined and they were scientifically analyzed. First of all, according to the scientific analysis, chemical compositions of celadon clay showed a dispersed distribution at RO2 3.79-7.77mole and RO+R2O 0.33-0.49mole. When the microstructure was analyzed, most celadons excavated from the Beopcheon temple site, Wonju, which are estimated to be used in real life, had a favorable state, and some celadons from the Son-gok 2-ri 4th kiln site were found not to be glazed and sintered properly. When analyzing body crystalline phases of the celadons using the XRD method, quartz and mullite were extracted from all of the samples. And corundum was extracted from sg4 sample. Though firing temperature of each sample was different, they were mostly fired to temperatures between 1150 and $1200^{\circ}C$ and some of them experienced a low temperature of $1100^{\circ}C$ or a high temperature above $1200^{\circ}C$. Various chemical compositions and producing techniques were observed in the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site and it is hard to assure that the Son-gok 2-ri 4th kiln site was the production kiln site of the celadons used in the Beopcheon temple site. But according to the analysis of rare earth elements, some of the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site displayed a distribution pattern with certain regularity and this implies there is a possibility that the raw materials used in producing the ceramics might have come from the same origin. From the perspective of ceramic history, the celadons excavated from the Beopcheon temple site and Son-gok 2-ri 4th kiln site were produced using the same molding and sintering technique. Also, it is estimated that they were produced in the 12th or 13th century, judging from the overall shapes and patterns of the celadons.

Calibration of crop growth model CERES-MAIZE with yield trial data (지역적응 시험 자료를 활용한 옥수수 작물모형 CERES-MAIZE의 품종모수 추정시의 문제점)

  • Kim, Junhwan;Sang, Wangyu;Shin, Pyeong;Cho, Hyeounsuk;Seo, Myungchul
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.20 no.4
    • /
    • pp.277-283
    • /
    • 2018
  • The crop growth model has been widely used for climate change impact assessment. Crop growth model require genetic coefficients for simulating growth and yield. In order to determine the genetic coefficients, regional growth monitoring data or yield trial data of crops has been used to calibrate crop growth model. The aim of this study is to verify that yield trial data of corn is appropriate to calibrate genetic coefficients of CERES-MAIZE. Field experiment sites were Suwon, Jinju, Daegu and Changwon. The distance from the weather station to the experimental field were from 1.3km to 27km. Genetic coefficients calibrated by yield trial data showed good performance in silking day. The genetic coefficients associated with silking are determined only by temperature. In CERES-MAIZE model, precipitation or irrigation does not have a significant effect on phenology related genetic coefficients. Although the effective distance of the temperature could vary depending on the terrain, reliable genetic coefficients were obtained in this study even when a weather observation site was within a maximum of 27 km. Therefore, it is possible to estimate the genetic coefficients by yield trial data in study area. However, the yield-related genetic coefficients did not show good results. These results were caused by simulating the water stress without accurate information on irrigation or rainfall. The yield trial reports have not had accurate information on irrigation timing and volume. In order to obtain significant precipitation data, the distance between experimental field and weather station should be closer to that of the temperature measurement. However, the experimental fields in this study was not close enough to the weather station. Therefore, When determining the genetic coefficients of regional corn yield trial data, it may be appropriate to calibrate only genetic coefficients related to phenology.

Test of Independence Between Variables to Estimate the Frequency of Damage in Heat Pipe (열수송관 파손빈도 추정을 위한 변수간 독립성 검정)

  • Myeongsik Kong;Jaemo Kang;Sungyeol Lee
    • Journal of the Korean GEO-environmental Society
    • /
    • v.24 no.12
    • /
    • pp.61-67
    • /
    • 2023
  • Heat pipes located underground in urban areas and operated under high temperature and pressure conditions can cause large-scale human and economic damage if damaged. In order to predict damage in advance, damage and construction information of heat pipe are analyzed to derive independent variables that have a correlation with frequency of damage, and a simple regression analysis modified model using each variable is applied to the field. However, as the correlation between independent variables applied to the model increases, the independence between variables is harmed and the reliability of the model decreases. In this study, the independence of the pipe diameter, burial depth, insulation level of monitoring system, and disconnection or short circuit of the detection line, which are judged to be interrelated, was tested to derive a method for combining variables and setting categories necessary to apply to the frequency of damage estimation model. For the test of independence, the continuous variables pipe diameter and burial depth were each converted into three categories, insulation level of monitoring system was converted into two categories, and the categorical variable disconnection or short circuit of the detection line status was kept as two categories. As a result of the test of independence, p-value between pipe diameter and burial depth, level of monitoring system and disconnection or short circuit of the detection line was lower than the significance level (α = 0.05), indicating a large correlation between them. Therefore, the pipe diameter and burial depth were combined into one variable, and the categories of the combined variable were set to 9 considering the previously set categories. The insulation level of monitoring system and the disconnection or short circuit of the detection line were also combined into one variable. Since the insulation level is unreliable when the detection line status is disconnection or short circuit, the categories of the combined variable were set to 3.

Overexpression of rice NAC transcription factor OsNAC58 on increased resistance to bacterial leaf blight (전사인자 OsNAC58 과발현을 통한 벼 흰잎마름병 저항성 증진 벼)

  • Park, Sang Ryeol;Kim, Hye Seon;Lee, Kyong Sil;Hwang, Duk-Ju;Bae, Shin-Chul;Ahn, Il-Pyung;Lee, Seo Hyun;Kim, Sun Tae
    • Journal of Plant Biotechnology
    • /
    • v.44 no.2
    • /
    • pp.149-155
    • /
    • 2017
  • Bacterial blight in rice caused by Xanthomonas oryzae pv. oryzae (Xoo) greatly reduces the growth and productivity of this important food crop. Therefore, we sought to increase the resistance of rice to bacterial blight by using a NAC (NAM, ATAF, and CUC) transcription factor, one of the plant-specific transcription factors that is known to be involved in biotic/abiotic stress resistance. By isolating the OsNAC58 gene from rice and analyzing its biological functions related to Xoo resistance, phylogenetic analysis showed that OsNAC58 belongs to group III. To investigate the biological relationship between bacterial leaf blight (BLB) and OsNAC58 in rice, we constructed a vector for overexpression in rice and generated transgenic rice. The expression analysis resulting from use of RT-PCR showed that OsNAC58-overexpressed transgenic rice exhibited higher levels of OsNAC58 expression than wild types. Further, subcellular localization analysis using rice protoplasts showed that the 35S/OsNAC58-SmGFP fusion protein was localized in the nuclei. Thirteen OsNAC58-overexpressed transgenic rice lines, with high expression levels of OsNAC58, showed more resistant to Xoo than did the wild types. Together, these results suggest that the OsNAC58 gene of rice regulates the rice disease resistance mechanism in the nucleus upon invasion of the rice bacterial blight pathogen Xoo.

The Relationship Analysis between the Epicenter and Lineaments in the Odaesan Area using Satellite Images and Shaded Relief Maps (위성영상과 음영기복도를 이용한 오대산 지역 진앙의 위치와 선구조선의 관계 분석)

  • CHA, Sung-Eun;CHI, Kwang-Hoon;JO, Hyun-Woo;KIM, Eun-Ji;LEE, Woo-Kyun
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.19 no.3
    • /
    • pp.61-74
    • /
    • 2016
  • The purpose of this paper is to analyze the relationship between the location of the epicenter of a medium-sized earthquake(magnitude 4.8) that occurred on January 20, 2007 in the Odaesan area with lineament features using a shaded relief map(1/25,000 scale) and satellite images from LANDSAT-8 and KOMPSAT-2. Previous studies have analyzed lineament features in tectonic settings primarily by examining two-dimensional satellite images and shaded relief maps. These methods, however, limit the application of the visual interpretation of relief features long considered as the major component of lineament extraction. To overcome some existing limitations of two-dimensional images, this study examined three-dimensional images, produced from a Digital Elevation Model and drainage network map, for lineament extraction. This approach reduces mapping errors introduced by visual interpretation. In addition, spline interpolation was conducted to produce density maps of lineament frequency, intersection, and length required to estimate the density of lineament at the epicenter of the earthquake. An algorithm was developed to compute the Value of the Relative Density(VRD) representing the relative density of lineament from the map. The VRD is the lineament density of each map grid divided by the maximum density value from the map. As such, it is a quantified value that indicates the concentration level of the lineament density across the area impacted by the earthquake. Using this algorithm, the VRD calculated at the earthquake epicenter using the lineament's frequency, intersection, and length density maps ranged from approximately 0.60(min) to 0.90(max). However, because there were differences in mapped images such as those for solar altitude and azimuth, the mean of VRD was used rather than those categorized by the images. The results show that the average frequency of VRD was approximately 0.85, which was 21% higher than the intersection and length of VRD, demonstrating the close relationship that exists between lineament and the epicenter. Therefore, it is concluded that the density map analysis described in this study, based on lineament extraction, is valid and can be used as a primary data analysis tool for earthquake research in the future.

황해 동부해역에서 식물플랑크톤 군집의 시공간적 분포에 미치는 환경요인에 관한 연구

  • Park, Seung-Yun;Son, Jae-Gyeong;Yun, Suk-Gyeong;Heo, Seung;Kim, Seong-Jin
    • Proceedings of the Korean Environmental Sciences Society Conference
    • /
    • 2007.05a
    • /
    • pp.308-311
    • /
    • 2007
  • 황해의 25개 조사정점의 표층수에 대한 해양환경요인 및 식물플랑크톤 현존량의 월별 조사결과를 종합하여 주성분분석(PCA)을 실시한 결과 주성분 I에서는 변화를 26.6% 설명할 수 있으며, 이중 질산질소가 가장 많이 기여하였고, 이어서 용존무기질소, 규산규소, 수온, 용존산소, 암모니아질소 순으로 기여 하고 있었다. 주성분 II에서는 20.3%를 설명 할 수 있으며, 이중 용존산소가 가장 많이 기여하였고 그 외 엽록소 a, 수온, 염분, 규산규소, 식물플랑크톤 현존량 순으로 기여 하였다. 주성분 III에서는 15.1%를 설명 할 수 있으며, 이중 인산인이 가장 많이 기여하였고 그 외 염분, 아질산질소, 수온, 용존산소, 질산질소, 용존무기질소 순으로 기여하였다. PCA에 이용된 항목 중 부유물질은 제외한 모든 항목은 주성분 I, II, III에 5%이하 유의수준에서 의미 있는 상관성이 있었다. 주성분 I은 질산성질소, 용존무기질소, 규산규소, 인산인과는 긍정적인 상관성(p<0.0001)을 갖고, 수온, 암모니아질소와는 부정적인 상관성을 보였다(p<0.001). 주성분 II에서는 용존산소, 엽록소 a, 식물플랑크톤 현존량은 긍정적 상관성을 나타내었고, 수온, 염분, 규산규소와는 부정적인 상관성을 보였으며(p<0.0001), 주성분 III에서는 염분, 수온, 질산질소, 용존무기질소, 식물플랑크톤 현존량과는 긍정적인 상관성(P<0.0001)을 나타내었고 인산인, 아질산질소, 용존산소는 부정적인 상관성을 나타내었다 (p<0.01). 공간적인 분포특성은 조사정점에 따라 항목별 결과에 대한 분산이 커서 일정한 특성을 도출하기가 어려운 상태이나 대체로 PCA II축을 기준으로 상부인 $1/4{\sim}2/4$분면에 북부와 중부의 조사정점이 위치하고 음의 방향인 $3/4{\sim}4/4$분면에 중부와 남부의 조사정점이 위치하고 있어 북측의 307선과 308선 및 중부의 309선과 310선 그리고 남측의 311선과 312선으로 구분되어지는데 그 중에서 태안반도의 연안역인 307선의 03점은 계절에 변화가 가장 커서 분산의 폭이 심한 상태로서 다른 조사정점들과 구분되어진다. 전반적으로 북측해역에서는 용존산소, 엽록소 a, 식물플랑크톤 현존량이 남측해역에 비해 상대적으로 많은 반면, 남측해역은 수온과 염분 및 규산규소가 높은 상태이었다. 북쪽인 307선과 308선은 연안역과 외해에서 상대적으로 영양염류가 높았으며, 중부인 309선과 310선은 연안역과 준 외해역인 07점과 09점에서 영양염류가 높았었고, 남부 해역인 311선과 312선에서는 연안역에서 영양염류가 상대적으로 높은 경향을 나타내었다. 즉 황해 동부는 연안역에서는 조석간만의 차가 심하고, 새만금 및 시호호등과 같은 대규모의 간척 매립으로 육상의 오염원이 자정작용을 거치지 못하고 직접 연안으로 유입되고 있는 실정이다. 또한 10여 년 전부터 육지의 모래부족으로 다량의 바다 모래가 채취되어 왔고 그 량이 점차 증가추세이며, 중부외해역에서는 각종 폐기물 투기로 점차 영양염류의 부하량이 증가되고 있어 특히 질소계와 인의 영양염류 농도가 높아지고 있는 추세이다. 시간적 변동특성은 전반적으로 순환하는 형태를 유지하고 있다. 2005년 2월에는 질산질소, 용존무기질소, 규산규소, 인산인, 용존산소가 높았었으며 4월로 접어들면서 항목 간에 분산되는 경향을 보이면서 수온, 엽록소 a 및 식물플랑크톤이 증가 하면서 해역에 따라 좌우로 분산되는 경향을 나타내었고 6월에는 아질산질소를 제외한 영양염류가 감소하는 경향을 보였다. 8월에는 6월에 비해 수온이 높아지고 규산규소, 질산질소, 용존무기질소 등이 약간 증가추세이었으며 10월로 접어들면서 증가추세가 더 높아졌었고 12월에는 질산질소, 용존무기질소, 규산규소, 인산인, 용존산소가 높아졌었다. 2006년 4월에는 2005년 4월에 비해 수온, 엽록소 a, 식물플랑크톤의 현존량이 높아져서 전년 동시기와 약간 다른 양상을 보이고 있었다. 즉 동계인 2월을 시작으로 반 시계 또는 시계 방향으로 순환하는 형태를 유지하고 있으며, 4월은 2개년 비교해 보았을 때 해마다 해양환경에 따라 그 순환 정도 및 형태가 다를 것으로 추정된다.

  • PDF

Avascular Necrosis of Femoral Head on Bone Scan (대퇴골두 무혈성 괴사의 뼈스캔상의 병기)

  • Yang, Hyung-In;Kim, Eui-Jong;Kim, Deog-Yoon;Ryu, Kyung-Nam;Cho, Kyung-Sam
    • The Korean Journal of Nuclear Medicine
    • /
    • v.28 no.2
    • /
    • pp.206-213
    • /
    • 1994
  • We studied 90 patients(179 femoral heads) with avascular necrosis of femoral head, who had been performed X-ray, bone scan and MRI to compare of the findings of AVN on bone scan between each other, retrospectively. The patients were 82 males and 9 females, their mean age was 45 years. Radiographic stages were classified by Steinberg modification, radionuclide stages were classified as followed; stage o(or type 0) : normal, stage 1 : faint ring like uptake around the femoral head, stage 2: intense ring like uptake, stage 3: irregular increased uptake with central photon defect, stage 4 : Intense diffuse increased uptake at femoral head and stage 5 : hip joint deformity with relatively mild increased uptake. The findings of MRI were classified according to extent, location, early or advanced lesion, signal intensity of the lesion and joint effusion. 156(87%) of 179 femoral heads had avascular necrosis, 68(75.5%) of 90 patients had bilateral AVN, 35 femoral heads had early stage and 120 had advanced stage. The detection rate of AVN by X-ray and bone scan were 85% (134), 91.6% (143), respectively. Early AVN with atypical types of bone scan showed larger extent, moderate to large amount of joint effusion, soft tissue hypertrophy within joint, and secondary degenerative changes. Bone scan had relatively high detection rate in the diagnosis of AVN of femoral head, and demonstrated various types depending on the disease stage.

  • PDF