• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.161-171
• /
• 1999

Impact resonance testing was carried out on small and large concrete blocks containing several types of artificial flaws respectively. Quantitative analysis of the observed peak frequencies in the impact resonance tests identifies the possible normal modes of concrete blocks containing flaws. and enables to determine the depth and size of the flaws in concrete blocks. In this study, concrete can be treated as a homogeneous and isotropic material. The flaw size and location at each section of artificial flaw series in small and large concrete blocks, determined through two-dimensional scanning of impact point and real-time fast Fourier transform, are in good agreement with real size location, respectively. Consequently, quantitative analysis method of vibration modes in the impact resonance tests, which can be applied for homogeneous and isotropic material, can be useful for the detection of flaws in any case of small and large concrete blocks in this study.

• Journal of Korea Foundry Society
• /
• v.42 no.4
• /
• pp.209-217
• /
• 2022

In the present study, in order to prevent the misrun defects that occur during traditional brass casting, a method for selecting the proper casting process conditions is proposed. A learning model was developed and demonstrated to be able to learn the presence or absence of defects according to the casting process conditions and to predict the occurrence of defects depending on the certain process given. Appropriate process conditions were determined by applying the proposed method, and the determined conditions were verified through a comparison of different simulation results with additional conditions. With this method, it is possible to determine the casting process conditions that will prevent defects in the desired sand model. This technology is expected to contribute to realization of smart traditional brass farming workshops.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.1
• /
• pp.53-62
• /
• 2001

Effects of surface defect on thermal stability and stress crack resistance of high density polyethylene geomembranes in environmental conditions were examined by comparing the mechanical properties, chemical resistance and failure times of geomembranes between defective cases under different temperatures. Artificial surface defects were added to the surface of geomembranes by scratch apparatus designed specially. The number of surface defects was increased with the smaller size of scratch induced particles, and the more scratch addition numbers at the shear rate of scratch induced mechanism, 100mm/min. The tensile strength were decreased but the tensile strain was increased with the above conditions. In chemical resistance of defective geomembranes, the tensile strength were decreased but the tensile strain was increased with the longer immersion period and the higher temperature under the same scratch induced conditions. Finally, failure times of defective geomembranes by ESCR test were shifted to the shorter time ranges by increasing temperatures.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.34-39
• /
• 2013

In the advanced research deducted infrared thermography (IRT) test using 4 inch pipe with artificial wall-thinning defect to measure on the wall-thinned nuclear pipe components. This study conducted for defect detection condition of nuclear small-bore pipe research using deducted condition in the advanced research. Defect process is processed by change for defect length, circumferential direction angle, wall-thinning depth. In the used equipment IR camera and two halogen lamps, whose full power capacitany is 1 kW, halogen lamps and Target pipe experiment performed to the distance of the changed 1 m, 1.5 m, 2 m. To analysis of the experimental results ensure for the temperature distribution data, by this data measure for defect length. artificial defect of 4 inch pipe is high reliability in the 2 m, but small-bore pipe is in the 1.5 m from the defect clearly was detected.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.715-720
• /
• 1995

DUPIC 핵연료의 제작 조건, 특히 소결 조건에서 필요한 O/M값에 따른 산소포텐샬을 점결함모형을 이용하여 구하였다. 산소포텐샬 값은 순수 우라니아에서보다 크게 나타났고 주요 점결함 형태의 변화로 온도에 따라 엔트로피 값의 변화가 보였다. 연소중 DUPIC핵연료의 산소포텐샬 변화는 핵연료를 닫힌 계로 보고 물질 보존 및 평형법칙을 기초로 하여 구하였다. 산소포텐샬은 초기에 급격히 증가하지만 곧 일정한 값에서 매우 완만히 증가하게 된다. O/M값도 거의 변화가 없는데, 이는 Mo의 완충작용 때문이다. 따라서 초기 Mo의 화학적 형태- 금속 또는 산화물-가 DUPIC핵연료 O/M값 변화에 큰 영향을 미칠 것으로 예측되며 DUPIC핵연료 제작시 소결 조건에 유의할 필요가 있다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.12-19
• /
• 2012

This study conducted infrared (IR) thermography tests using pipe and plate specimens with artificial wall-thinning defects to find an optimal condition for IR thermography test on the wall-thinned nuclear piping components. In the experiment halogen lamp was used to heat the specimens. The distance between the specimen and the lamp and the intensity of halogen lamp were regarded as experimental parameter. When the distance was set to 1~2 m and the lamp intensity was above 60 % of full power, a single scanning of IR thermography detected all artificial wall-thinning defects, whose minimum dimension was $2{\Theta}=90^{\circ}$, d/t=0.5, and $L/D_o=0.25$, within the pipe of 500 mm in length. Regardless of the distance between the specimen and the lamp, the image of wall-thinning defect in IR thermography became distinctive as the intensity of halogen lamp increased. The detectability of IR thermography was similar for both plate and pipe specimens, but the optimal test condition for IR thermography depended on the type of specimen.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.109-117
• /
• 1995

고에너지 이온주입시 격자결함의 생성 및 열처리 거동이 double crystal X-ray와 단면 TEM을 사용하여 연구되었다. 3MeV P+ 이온주입한 실리콘의 DCXRD 분석 결과조사량 증가에 따라 모재 내의 변형량은 증가하였다. HRTEM 분석 결과 고에너지 이온주입시 결함은 표면 부근에 희박하고 Rp 부근에 집중되어 있었다. 또한 이온주입 상태의 결함층은 dark band의 형태로 존재하였으며 열처리시 이차결함은 이곳으로부터 생성됨이 관찰되었다. 3MeV P+,$1X1015extrm{cm}^2$의 조건으로 이온주입된 실리콘 시편의 열처리에 따른 X-ray rocking curve 분석을 통하여 열처리 온도가 $550^{\circ}C$에서 $700^{\circ}C$로 증가함에 따라 모재 내부의 최대 변형량이 7X10-4에서 2.9X10-4으로 감소함이 관찰되었다. 특히 $550^{\circ}C$ 열처리한 시편의 경우 표면으로부터$-1.5mu$m 영역에 작은 변형층이 넓게 잔존하였으며 열처리온도를 $700^{\circ}C$로 증가한 경우 제거되었다. 이온주입시 생성된 일차결함들은 $700^{\circ}C$ 열처리시 $60^{\circ}$ 전위와 <112> 막대 모양 결함, $1000^{\circ}C$ 열처리시 <110>방향의 전위루프로 열처리 조건에 따라 여러 가지 모양의 이차결함으로 변화하였다. 고에너지 이온주입에 의해 발생한 이차결함은 고온에서도 안정하여 고온 열처리에 의한 제거가 용이하지 않았다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.27-27
• /
• 1999

본 연구에서는 초음파 Immersion법을 이용하여 복합재 연소관내에 존재하는 결함을 검출하는 방법에 대하여 연구하였으며, 이를 위하여 FRP의 delamination, FRP-EPDM간의 미접착을 모사한 모의 결함 시편을 제작하여 시험하였다. 먼저 복합재료에 대한 초음파 시험방법을 최적화하기 위하여 가장 검출 감도가 좋은 탐촉자의 적용 주파수조건 및 물거리를 구하였으며, 이들 최적 조건으로 모의 결함 시편을 A, B, C-Scan하여 결함을 검출 분석하였다. 그리고 시험 자료를 바탕으로 데이터 값을 분석함으로써 복합재료에서의 음파 속도, 음향 임피던스, 반사율 및 투과율 등 복합재료의 초음파 특성을 산출하였으며, 동 시편에 대한 X-ray 필름을 촬영하여 그 결과를 초음파 시험 결과와 비교 분석하였다.

• Journal of Korea Foundry Society
• /
• v.9 no.6
• /
• pp.446-453
• /
• 1989

무철심 유도로를 이용한 주철 및 주강의 용해보온에 요구되는 야금학적인 조건에 관하여 광범한 연구 조사가 있었다. 가장 중요한 법칙을 요약 설명하고자 한다. 이들 법칙은 주물공장에서 활용할 수 있으며 주물의 모서리 근처, 가혹한 조건하에서 발생 할 수 있는 여러 가지 결함을 방지하는데 도움이 될 것이다. 이러한 점에서 작업공정 절차를 관찰하는 것이 중요하며 현장에서 사용하도록 판정도표를 작성하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.321-331
• /
• 2015

A study on the application of cooling defect detection was performed on the basis of a preceding study on the heated defect detection in nuclear piping loop system, using lock-in infrared thermography. A loop system with piping defects was made by varying the wall-thinning length, the circumference orientation angle, and the wall-thinning depth. The test was performed using an IR camera and a cooling device. Distance between the cooling device and the target loop system was fixed at 2 m. For analyzing experimental results, the temperature distribution data for cooling, and phase data were obtained. Through the analysis of this data, the defect length was measured. The reliability of the measurements for cooling defect conditions was shown to be higher in the lock-in infrared thermography data than the infrared thermography data.