• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.313-319
• /
• 1999

The development of deformation texture in FCC polycystalline metals during rolling was simulated by the finite element analysis using a large-deformation, elaatic-plastic, rate-dependent polycrystalline model of crystal plasticity. Different plastic anisotropy due to different orientation of each crystal makes inhomogeneous deformation. Assuming plane strain compression condition, the simulation with a high rate sensitivity resulted in main component change from Dillamore at low rate sensitivity to Brass component.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.55-61
• /
• 1996

Finite element calculations are performed for crystalline solids subjected to plane strain tensile loading. Using Asaro's double slop model, shearband developments in single crystals are analyzed. The effect of various rate sensitivities and latent hardening parameters on microscopic plastic behavior was clarified. Moreover the deformation behavior of polycystals which have grain boundaries was compared to that of single crystals.

• Transactions of Materials Processing
• /
• v.5 no.4
• /
• pp.297-304
• /
• 1996

A process model is formulated considering the effect of crystallographic texture developed in forming process. The deformation induced plastic anisotropy can be predicted by capturing the evolution of texture during large deformation in the polycrystalline aggregate. The anisotropic stiffness matrix for the aggregate is derived and implemented in Eulerian finite element code using a Consistent Penalty method. As an application the evolution of texture in rolling drawing and extrusion processes are simulated. The numerical results show good agreements with report-ed experimental textures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.222-222
• /
• 2009

• Transactions of Materials Processing
• /
• v.11 no.3
• /
• pp.217-223
• /
• 2002

초소형 정밀 부품의 효율적 생산 방안으로 대두되고있는 미세 성형 기술에 관하여, 극세선 압출, 미세 성형 기술과 핵심요소기술인 정밀 위치 결정 기술, 미세 성형 재료 기계적 특성 평가 기술과 이론 해석을 중심으로 국내 연구 현황을 소개한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.101.2-101.2
• /
• 2012

스크린 프린팅 기술은 공정이 단순하고 값이 싸며 대량생산에 용이하기 때문에 결정질 실리콘 태양전지의 전극형성에 널리 사용되고 있다. 스크린 프린팅 기술을 이용한 전면 전극은 일반적으로 은 페이스트 (Ag paste)를 패시배이션 층이 증착 된 실리콘 기판 위에 인쇄를 한 후 고온의 소성 공정을 통하여 형성이 된다. 은 페이스트가 실리콘 에미터 층과 접촉하기 위해서는 패시배이션 층을 뚫고 접촉이 형성 되어야 한다. 이 과정에서 소성 후 은 전극과 실리콘 기판 사이의 계면에는 glass layer가 형성되어 접촉저항을 높이고 태양전지의 직렬 저항을 높이는 인자로 작용한다. 따라서 본 연구는 형성된 은 전극과 실리콘 사이의 계면 특성을 평가하고 glass layer의 두께와 접촉 저항 사이의 관계를 분석하기 위해서 진행되었다. 접촉저항은 trasnfer length method (TLM) 법을 이용하여 측정을 하였고 glass layer의 두께는 field emission scanning electron microscope(FE-SEM)을 이용하여 평가하였다. 또한 glass layer의 두께에 따른 전반적인 태양전지의 특성을 solar simulator, probe station, suns-Voc를 통하여 평가하였다. 결과적으로 glass layer의 두께에 따라서 접촉저항이나 직렬저항이 변화하는 것을 관찰 할 수 있었고 이를 정량적으로 분석하고자 하는 노력이 시도되었다. 이러한 변화는 또한 태양전지의 특성에 영향을 미치는 것을 확인할 수 있었다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.282-284
• /
• 2007

The hardening and the constitutive equation based on the crystal plasticity are introduced for the numerical simulation of hemispherical sheet metal forming. For calculating the deformation and the stress of the crystal, Taylor's model of the crystalline aggregate is employed. The hardening is evaluated by using the Taylor factor, the critical resolved shear stress of the slip system, and the sum of the crystallographic shears. During the hemispherical forming process, the texture of the sheet metal is evolved by the plastic deformation of the crystal. By observing the texture evolution of the BCC sheet, the texture evolution of the sheet is traced during the forming process. Deformation texture of the BCC sheet is represented by using the pole figure. The comparison of the strain distribution and punch force in the hemispherical forming process between crystal plasticity and experiment shows the verification of the crystal-based formulation and the accuracy of the hardening and constitutive equation obtained from the crystal plasticity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.271-271
• /
• 2007

LTCC 소재는 glass/ceramic composite로 구성된다. LTCC 소재에 embedding 되는 고유전율 소재 또한 이와 같은 소재설계를 통하여 무수축 접합이 가능할 것으로 판단된다. 그러나 이에 대한 연구결과가 보고된바 없고 몇몇 $Al_2O_3$의 infiltration에 대한 무수축 소성 관련 선행 연구를 바탕으로 고유전율 소재인 $BaTiO_3$의 무수축 소성이 연구되는 것이 필요한 시점이다. 따라서 본 연구는 저온에서의 glass infiltration에 의한 무수축 $BaTiO_3$ layer의 저온소성특성 및 유전특성을 평가하였다. 실험결과 $785^{\circ}C$에서 glass의 충분한 침투가 확인되며 결정구조에서는 glass/$BaTiO_3$ composite이 형성되었다. 무수축 접합 layer의 소성조건과 glass 두께 변화에 따른 유전특성 및 layer의 결정구조를 비교평가 하였다.

• Journal of the Korean Ceramic Society
• /
• v.35 no.11
• /
• pp.1203-1211
• /
• 1998

The microwave sintered BaTiO3 samples were obtained by using the microwave sintering device which can precisely control the sintering temperature and the sinter time by using IR optical thermometer and PID temperature controller. During microwave sintering the internal temperature of samples were mesur-ed by the optical fiber thermometer to compare the sintering behaviors between microwave- and con-ventionally sintered ones. The former showed the faster rate of grain growth with sintering time and the larger grain size than the latter. Also they showed the similar pattern of dielectric properties with tem-perature changes from 2$0^{\circ}C$ to 16$0^{\circ}C$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.309-312
• /
• 2001

FEM simulating system of the cross-rolling texture formation offers a systematic and efficient way of exploring the relationship between the process variables and the state of plastic anisotropy of sheet product. Cross-rolled sheets possess higher average plastic strain ratios and lower planer anisotropy than those of the straight-rolled sheets. The employed model is a finite-element polycrystal model which each element used in FEM is assumed to be a crystal having different orientation by Takahashi. Texture development, deformation textures due to cross-rolling are predicted for face-centered cubic sheet metal. Crystal orientations are assigned on the basis of the pole figures obtained by X-ray diffraction. Development of anisotropy during cross rolling of an fcc sheet material is predicted theoretically with respected to flow stress and R-value in tensile test.