Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

State of Micro-Forming Technology Development

미세 성형 기술 개발 현황

  • 나경환 (한국생산기술연구원 마이크로성형팀)
  • Published : 2002.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

초소형 정밀 부품의 효율적 생산 방안으로 대두되고있는 미세 성형 기술에 관하여, 극세선 압출, 미세 성형 기술과 핵심요소기술인 정밀 위치 결정 기술, 미세 성형 재료 기계적 특성 평가 기술과 이론 해석을 중심으로 국내 연구 현황을 소개한다.

Keywords

References

  1. JSTP v.37 no.430 Development of 3-dimensional micro component forming press machine Aoki
  2. Toshiba review v.51 no.7 Fine mechanisms raising the value of products Owa
  3. Toshiba review v.51 no.7 Trends in fine mechanism products Kubota
  4. JSPE v.62 no.1 Trends in precision metal forming Sano
  5. Proc. IEEE the 13th Annual Int. Conf. on MEMS New amorphous alloys as micromaterials and the processing technologies Saotome
  6. Precision machine design Slocum
  7. Int. Mat. Rev. v.39 Mechanical testing of thin films Brotzen
  8. J. Mech. Phys. Solids. v.48 Elastic properties of polycrystals influence of texture and stereology Bunge
  9. J. App. Mech. v.50 Crystal plasticity Asaro https://doi.org/10.1115/1.3167205
  10. Materials Science and Engineering Micro-tensile test of rolled Cu foil with miniature specimen K. S. Kim;S. H. Hong;H. Park;K. Na
  11. J. of Materials Processing Technology v.113 Analysis of the milli-forming of single-crystal and poly-crystal bar Y.-S. Lee https://doi.org/10.1016/S0924-0136(01)00683-5
  12. 미세체적 성형기술개발보고서 나경환;한창수;홍순형;이용신;한동철

Cited by

  1. Multi-Stage Forming Analysis of a Milli-Component for Improvement of Forming Accuracy vol.13, pp.5, 2004, https://doi.org/10.5228/KSPP.2004.13.5.429