• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.469-472
• /
• 1998

상업적으로 유용한 대부분의 합성고분자막들은 상전환법(phase inversion process)이라는 방법에 의해서 제조된다. 이 제조공정에서는 단일 고분자(homogeneous polymer)용액에 존재하는 용매를 비용매와 교환함으로써 액체로부터 고체로 상이 전환된다. 그리고 pore의 크기나 pore의 크기분포와 같은 막의 구조를 결정하는 요인은 일반적으로 용질의 입자크기 또는 분자크기 및 화학적 성질에 기인한다[1-3]. (중략)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.4
• /
• pp.178-182
• /
• 2012

The grain growth is very important because of its great influence on the various materials properties. Therefore, in this study, the effects of anisotropic grain boundary energy on grain growth in 2-D have been investigated with a large scale phase field simulation model on PC. A $2000{\times}2000$ grid system and the initial number of grains of about 73,000 were used in the computer simulation. The anisotropic ratio of grain boundary energy, ${\sigma}_{max}/{\sigma}_{min}$, has been varied from 1 to 3. As the anisotropy increased, the grain growth exponent, n, increased from 2.05 to 2.37. The grain size distribution showed a central plateau in the isotropic case, and was changed into no central plateau and the increasing population of very small grains in the anisotropic case, resulting from slowly disappearing grains. Finally, simulated microstructures were compared according to anisotropy.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.2
• /
• pp.161-167
• /
• 1996

The CSD (crystal size distribution) of diopside crystals in the calc-silicate hornfels of the Hwanggangni Formation intruded by the Cretaceous Daeyasan granite shows the patterns of continuous nucleation and growth. There is correlation between the distance from the intrusion contact and the slopes from the linear part of log(population density) vs. size diagrams. In the log(population density) vs. size diagrams of the samples systematically collected from the intrusion contact, two different groups are recognized; the slopes for the samples near the intrusion contact (horizontal distance from the contact less than 50m) are gentler (1500$cm^{-1}$) than those for the samples away from the intrusion contact (2500$cm^{-1}$, distance from the contact greater than 100 m). These differences may reflect the differences in growth rates and crystallization time, or the differences in diopside-forming reactions. All of the log(population density) vs. size diagrams show depletion of smaller crystals. The observed depletion may be due to Ostwald ripening or the changes in nucleation rates as the reactant phases diminishes. Similar grouping is also possible for the observed degree of depletion of smaller crystals; the depletion decreases with increasing distance from the intrusion contact, suggesting temperature-dependent rates of Ostwald ripening.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.33-39
• /
• 2015

CdS-QD particles are a nano-sized semiconducting crystal that emits light. Their optical properties show great potential in many areas of applications such as disease-diagnostic reagents, optical technologies, media industries and solar cells. The wavelength of emitting light depends on the particle size and thus the quality control of CdS-QD particle requires accurate determination of the size distribution. In this study, CdS-QD particles were synthesized by a simple ${\gamma}$-ray irradiation method. As a particle stabilizer polyvinyl pyrrolidone (PVP) were added. In order to determine the size and size distribution of the CdS-QD particles, sedimentation field-flow fractionation (SdFFF) was employed. Effects of carious parameters including the the flow rate, external field strength, and field programming conditions were investigated to optimize SdFFF for analysis of CdS-QD particles. The Transmission electron microscopy (TEM) analysis show the primary single particle size was ~4 nm, TEM images indicate that the primarty particles were aggregated to form secondary particles having the mean size of about 159 nm. As the concentration of the stabilizer increases, the particle size tends to decrease. Mean size determined by SdFFF, TEM, and dynamic light scattering (DLS) were 126, 159, and 152 nm, respectively. Results showed SdFFF may become a useful tool for determination of the size and its distribution of various types of inorganic particles.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.23-28
• /
• 1999

${\Alpha}-Fe_2O_3$ was accomplished by chemical method as low temperature as possible and the crystallographic and magnetic properties have been studied by Mossbauer spectroscopy and X-ray diffraction. The sample heated at 15$0^{\circ}C$ is found to have a Corundums symmetry with the hexagonal lattice constant a=8.26$\pm$0.05$\AA$, c=8.75$\pm$0.05$\AA$. The M$\"{o}$ssbauer spectra between the 4.2K and the room temperature show that the ${\Alpha}-Fe_2O_3$ crystallized with a single phase and fine sizes. The particle size distribution has the Gaussian distribution center at 98$\AA$ and the half width of 32$\AA$.TEX>.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.1271-1284
• /
• 2011

The entropy-based test of fit for the inverse Gaussian distribution presented by Mudholkar and Tian(2002) can only be applied to the composite hypothesis that a sample is drawn from an inverse Gaussian distribution with both the location and scale parameters unknown. In application, however, a researcher may want a test of fit either for an inverse Gaussian distribution with one parameter known or for an inverse Gaussian distribution with both the two partameters known. In this paper, we introduce tests of fit for the inverse Gaussian distribution based on the Kullback-Leibler information as an extension of the entropy-based test. A window size should be chosen to implement the proposed tests. By means of Monte Carlo simulations, window sizes are determined for a wide range of sample sizes and the corresponding critical values of the test statistics are estimated. The results of power analysis for various alternatives report that the Kullback-Leibler information-based goodness-of-fit tests have good power.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.227-227
• /
• 2003

흑연(graphite), 석탄(coal), 숯(char), soot(검댕이) 등의 탄소로 이루어진 재료들은 비정질부터 완전한 흑연결정까지 다양한 구조를 나타낸다. 이러한 탄소재료의 구조의 출발물질 뿐 아니라 열처리에 따라 강한 영향을 받는다 이러한 구조는 여러 구조인자에 의해 특성화되는데, 구조인자로는 층간거리 d, 결정립 크기 Lc 그리고 결정립 직경 La이다. 이런 구조 인자의 지식은 흑연화, 탄소화, 가스화 등과 같은 다양한 공정을 이해하는데 매우 중요하다. 많은 연구자들은 XRD, Raman 분광, 고분해능 TEM 등과 같은 여러 기술을 통하여 이러한 구조인자에 대한 해석을 시도하였다. 그 중 XRD는 정량적 분석에 있어서 가장 많이 이용되는 기술이다. XRD 회절피크의 위치로부터 층간거리 d를 구할 수 있으며, 결정립 크기 Lc 및 결정립 직경 La는 피크의 line 퍼짐(반가폭)으로 직접 구할 수 있다. 한편 섬유상 흡착제로 이용되는 등방성 탄소섬유는 이산화탄소 또는 수증기에 의해 쉽게 활성화되어 최고 약 2,500 $m^2$/g의 고 비 표면적을 얻을 수 있다. 이렇게 활성화 후 고 비표면적을 나타내는 이유는 좁은 분포를 나타내는 미세기공의 기공구조 때문에 발생하는 것으로 알려져 있다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.38-38
• /
• 2014

SPCC강판상에 PVD 스퍼터링법으로 Zn계 박막을 제작하였고, Zn계 박막의 결정구조와 표면특성에 미치는 산소의 영향을 해석하였다. 실험결과, 진공쳄버 내부에 있는 대부분의 Zn 이온중에서 Mg 이온이 증가할 때, Mg의 증발 및 흡착으로 인한 Zn의 증착핵 성장 억제와 Zn-Mg 금속간 화합물의 분산분포는 Zn-Mg막의 결정입자의 크기를 작게 만들었다. 산소가 쳄버내부에 존해하는 경우에는 XRD 피크는 상대적으로 감소되면서 브로딩하게 나타났다. 또한, 표면특성인 몰포로지의 경향을 분석해 보면 결정입도는 작아지는 현상을 보였다. 이것은 챔버 내부에 존재하는 잔류가스인 산소가 Zn 및 Mg과 같은 증착입자와 결합 및 흡착이 이루어지고, Zn 및 Mg 등이 증착핵의 마이그레이션 효과를 감소시켜 결정입도의 크기가 감소되는 것으로 나타났다.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.514-521
• /
• 2016

The High Efficiency Video Coding (HEVC) standard provides superior coding efficiency by utilizing highly flexible block structure and more diverse coding modes. However, rate-distortion optimization (RDO) process for the decision of optimal block size and prediction mode requires excessive computational complexity. To alleviate the computation load, this paper proposes a new moment-based fast CU size decision algorithm for intra coding in HEVC. In the proposed method, moment values are computed in each CU block to estimate the texture complexity of the block from which the decision on an additional CU splitting procedure is performed. Unlike conventional methods which are mostly variance-based approaches, the proposed method incorporates the third-order moments of the CU block in the design of the fast CU size decision algorithm, which enables an elaborate classification of CU types and thus improves the RD-performance of the fast algorithm. Experimental results show that the proposed method saves 32% encoding time with 1.1% increase of BD-rate compared to HM-10.0, and 4.2% decrease of BD-rate compared to the conventional variance-based fast algorithm.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1995.04a
• /
• pp.37-37
• /
• 1995