• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.233-236
• /
• 2013

As analog broadcast has replaced digital broadcast and HDTV broadcast has settled as a standard of broadcast system in Korea, most of broadcast in Korea send interlaced signal. For TV uses interlaced scan order, deinterlacing which converts interlaced signal into progressive signal has remain important. In this paper, efficient deinterlacing method considering continuity of edge direction is proposed. Deinterlacing along with the dege of an object is one of the main issue for better visual quality. Thus, an algorithm introduced in this paper consider not only the edge of object but continuity so that a better result is drawn forth. The result shows that the proposed algorithm excels comparing with conventional algorithms.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.3 no.4 s.11
• /
• pp.103-109
• /
• 2003

A numerical analysis of cable-stayed bridge is conducted to determine optimum longitudinal modulus of elasticity which represents the boundary condition between the tower and main girder. The effect of longitudinal modulus of elasticity is investigated for different loading condition (live load, wind load, seismic load), respectively. There are significant changes in the member forces as variations of longitudinal modulus of elasticity, such as, $k_h$=e=100tonf/m/bearing (live load), $k_h$=e=1000tonf/m/bearing (seismic load), However, the wind loads do not affect member forces. The optimum longitudinal modulus of elasticity is determined from considering minimum member forces in the numerical analysis results.

• Journal of the Korean Geophysical Society
• /
• v.5 no.4
• /
• pp.321-328
• /
• 2002

Difficulties encountered in downhole S-wave (shear wave) surveys include the precise determination of shear wave travel times and determination of geophone orientation relative to the direction of polarization caused by the seismic source. In this study an S-wave enhancing and a principal component analysis method were adopted as a tool for determination of S-wave arrivals and the direction of polarization from downhole S-wave survey data. An S-wave enhancing method can almost double the amplitudes of S-waves, and the angle between direction of polarization and a geophone axis can be obtained by a principal component analysis. Once the angle is obtained data recorded by two horizontal geophones are transformed to principal axes, yielding so called scores. The scores gathered along depth are all in-phase, consequently, the accuracy of S-wave arrival picking could be remarkably improved. Applying this processing method to the field data reveals that the test site consists of a layered ground earth structure.

• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.20-27
• /
• 2009

H.264/AVC video coding standard adapting a rate-distortion optimization technique to select the best coding mode with multi reference frames for each macroblock gets a higher coding efficiency than those of previous video coding standards but the computational complexity increases drastically. Therefore, many fast mode decision algorithms are proposed to reduce the computational complexity. Among them, we propose a fast intra mode decision algorithm based on directional information of I4MB. The proposed algorithm achieves consistent time saving about 15% in IPPP sequences and 44% in all I frame sequences with negligible loss in PSNR and small increment of bit rate compared with that of JM11.0.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.82-87
• /
• 2002

The attitude determination in LEO Satellite like KOMPSAT is one of the most important issues for Sun-Acquisition. Particularly, in KOMPSAT, the roll axis direction can be determined since the sun sensor gives the information on the Euler angle for pitch and yaw axes in Sun-Acquisition mode. In other words, it is the problem to determine the two unknown axes direction with one axis knowledge. This paper proposes a new effective method for attitude determination of general LEO satellites when one axis information is avilable and proves its usefulness throughout the simulation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.91-102
• /
• 2010

This study analyzed methodologies for determining the representative direction of a storm event. The mean direction, median direction, and modal direction of von Mises distribution were considered as representative directions. In addition, the results with and without considering the storm moving distance were also compared. As results, the modal directions of von Mises distribution were found to explain the directional characteristics of a moving storm much better than other methods. Also, it was found that the storm moving distance has a significant effect on the determination of representative directions of a moving storm, whose uncertainty can also be decreased significantly by considering the moving distance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.463-469
• /
• 1999

The potassium lithium niobate $K_3$$Li_2$$Nb_5$$O_{15}$ single crystals were growing in $K_x$$Li_{1-x}$$NbO_3$ (x = 0.4~0.6) chemical formular by the Czorchralski method. Crystal growth is studied in two orientations with growth along a-axis and c-axis. We have subjected this crystal to x-ray diffraction studies and found that they are single-crystalline and belong to tetragonal system with the lattice parameters a = b = 12.577 $\AA$ and c = 3.997$\AA$. The temperature dependence of dielectric constant was measured in the region of the phase transition. Curie temperature and diffuseness of phase transition are influenced by composition concentration. The composition and cation distribution of ferroelectric TB-type niobate crystals has a strong influence on the ferroelectric properties. Growth condition, optical transmittance, etching pattern and dielectric properties are presented and discussed.

• Monthly Korean Chicken
• /
• s.149
• /
• pp.102-103
• /
• 2007

• Science & Technology Policy
• /
• v.5 no.7 s.76
• /
• pp.33-47
• /
• 1995

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.247-250
• /
• 2009

본 연구에서는 반복하중을 받는 구리 나노와이어에서 나타나는 초탄성 거동을 분자동역학 전산모사를 통해 해석하였다. 나노스케일에서는 표면적 대 부피비가 매우 크기 때문에 표면효과가 지배적으로 나타난다. 이로 인해 벌크상태에서는 보이지 않던 새로운 성질들이 나노크기에서 나타나는데, 이러한 효과로 인해 나노와이어의 경우에는 초탄성 거동을 보인다. 초탄성 거동은 나노와이어의 결정학적 방향의 재배열에 의한 것으로써, 하중을 받는 동안 나노와이어의 결정 구조는 변하지 않으며, 쌍정의 발생 및 쌍정계면의 전파에 의해 결정학적 방향이 재배열된다. 재배열에 의해 부분적으로 변형되었던 나노와이어는 하중을 제거하거나 하중의 방향이 바뀜에 따라 원래의 상태를 회복하는 거동을 보이게 된다. 본 연구에서는 분자 동역학 전산 모사를 통해 <100>/{100} 구리 나노와이어가 반복적인 압축-인장 거동 하에서 초탄성을 보이게 됨을 확인하였으며, 반복 하중 싸이클을 증가시키는 전산모사를 통해 나노와이어의 초탄성이 영구적으로 유지됨을 확인하였다.