• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.128-137
• /
• 2015

Purpose: Most of the former studies about the occlusal contact patterns during the mandibular movement focused on foreigner. The purpose of this study is analyzing the occlusal contacts of young Koreans by using T-Scan system. Materials and methods: The sample size was 87 and the occlusal contacts of each right and left lateral movements were measured from the maximum intercuspation to the 3mm excursive position for three times respectively. All of the occlusal contacts were double checked through the thin metal foil. The results were categorized as two; 1) considering occlusal contact patterns on working side only, 2) considering occlusal contact patterns on working and nonworking sides. Results: The results showed that the nonworking side occlusal contacts play major roles in the lateral mandibular movement. In both cases of considering with and without the nonworking side occlusal contacts, the group function was the most prevalent. In the working side, the contacts were the most frequent in canine and the frequency of contacts was decreased as the distance was increased from canine to molar. In the nonworking side, the contacts were the most frequent in second molar. And the gender factor was statistically significant (${\alpha}$=.05), as females have more nonworking side occlusal contacts in this study. Conclusion: Among the three factors of anterior guidance, the group function was the most dominant factor. The analysis of 87 samples showed that canine contact was the most frequent in the working side and second molar contact was the most common in the nonworking side.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.647-653
• /
• 2009

Tooth transposition is an anomaly of eruption characterized by the interchanged positions of two adjacent teeth, which is divided into complete and incomplete transposition. There are three common approaches for treating transposition: aligning the involved teeth in their transposed positions, moving them to their correct anatomic position in the arch and extracting one of the transposed teeth. Considerations in treatment plans are esthetic, function, risk of jeopardizing the roots and damaging the supporting structures, position of the root apex, developmental stages of teeth and expected compliance. The presented case reports described one maxillary canine-the first premolar transposition and two mandibular lateral incisor-canine transpositions. The former transposed teeth were arranged in their transposed position, and the latter transposed teeth were rearranged into their normal position.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.543-549
• /
• 2005

The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and is a key in esthetics due to its position. Maxillary canine has the longest time to develop and a complex route from the place of formation to the site of eruption, and so it is prone to impaction more than other teeth. The clinician should consider the various treatment options : (a) No treatment and observation, (b) surgical exposure and orthodontic traction (c) autotransplantation (d) extraction. Surgical exposure of the canine and orthodontic treatment to bring the tooth into the line of occlusion is considered the most desirable approach. This case presents the results of treatment for impacted maxillary canine by surgical exposure and orthodontic tooth movement.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.601-610
• /
• 2001

The purpose of this retrospective study was to evaluate the level oi alveolar bone support of the erupted Permanent canine through the reconstructed cleft region compared to the contralateral canine on the non-cleft side. This study was limited to children with complete unilateral cleft lip and palate who underwent secondary alveolar iliac bone gvaft and the apices of the erupted canine roots were closed at the time of evaluation. With these criteria the study included 21 children whose average age at the time of bone graft reconstruction was 9.8 years, with a minimum of 12.4 years of age at the time of the evaluation. The study was limited to the use of iliac cancellous bone as the autograft material for reconstruction of the alveolar cleft. Cranial bone graft and other autogenous bone sources were excluded. The periapical radiographs were used to evaluate alveolar bone level of each canine. The percentages of root supported by the bone were established by dividing the amount of root covered with the bone by the anatomic root length. The canine oi the non-cleft side was used as an internal control and the canine on the cleft side was used as an experimental. There was a statistically significant difference in the alveolar bone support ratio between the control ($92.9\%$) and experimental canines ($8.7\%$). An average of $95\%$ level of alveolar bone support was achieved for the experimental canine in comparison to the control canine. Neither the presence of lateral incisor, nor the stage of root development of the canine at the time of the bone graft appeared to have affected the alveolar bone support ratio of the canine after the secondary bone graft.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.308-320
• /
• 2006

Rapid canine retraction, first introduced by Liou, is a distraction osteogenesis applied to the periodontal ligament tissue. Rapid tooth movement was facilitated by establishing minimal bony resistance on the distal surface of the canine by socket preparation and by osteogenesis on the mesial side in response to the periodontal distraction. Since undesired buccal tipping or extrusion of the canine during retraction tends to occur, it is crucial to maintain the firm path of movement and the axis of the canine during retraction. In order to improve the predictability of the canine movement, lingually extended distraction screws with heavy labial guiding wires were designed. Prefabricated plastic canine models for the estimation of socket depth and miniscrew implants for anchorage reinforcement were also devised. Applying these devices to a female patient with Class II anterior protrusion, the whole treatment was effectively finished in 13 months. Loss of vitality or periodontal problems did not occur throughout treatment, and stable occlusion was maintained during 10 months of retention. This case report demonstrates that a predictable rapid canine retraction can be achieved through the use of this modified technique.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.341-348
• /
• 1996

The efficiency of maxillary canine retraction by means of sliding mechanics along an 0.016 continuous labial arch and an 0.009 inch in diameter with a lumen of 0.030 inch NiTi closed coil spring was compared with that using the same NiTi closed coil spring and Molar Anchoring Spring(MAS) which was designed by author. MAS was made of .017" X .025" TMA wire and was given 60 degree tip-back bend on the wire close to the molar tube. This study was designed to investigate molar and canine root control during retraction into an extraction site with continuous arch wire system. Two techniques were tested with a continuous arch model embedded in a photoelastic resin. A photoelastic model was employed to visualize the effects of forces applied to canine and molar by two retraction mechanics. With the aid of polarized light, stresses were viewed as colored fringes. The photoelastic overview of the upper right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature of the canine and mesial curvature of the molar and premolar when NiTi closed coil spring was applied only, which means severe anchorage loss of the molar and uncontrolled tipping of the canine. 2. The least level compression was presented at the mesial root area of the molar and premolar, and mesial root area of the canine when NiTi closed coil spring and MAS were used simultaneously. Especially mesial alveolar crest region of the canine was shown moderate level of compression that means MAS can be used as a appliance for anchorage control and prevention of canine extrusion and uncontrolled tipping during canine retraction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.473-481
• /
• 2010

Maxillary canine impaction is an anomaly often encountered in children. Although it has been reported that the incidence of palatally impacted canines is higher than that of labially impacted ones, it has been found that labial impaction of canines is more common than palatal impaction in Asian populations. In the cases presented here, maxillary canines were guided normally after rapid palatal expansion, followed by modification of root angulation of neighboring lateral incisors in 8-10-year-old children who had maxillary canines suspected of labial impaction. Consequently, the method of modifying the root angulation of the maxillary lateral incisor, combined with rapid palatal expansion, is effective in preventing impaction of an ectopically erupting maxillary canine without resorting to surgical methods.

• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.384-398
• /
• 2011

Objective: The purpose of this study was to analyze the stress distribution and the displacement pattern of mandibular anterior teeth under various intrusive force vectors according to the position of orthodontic miniscrews and hooks, using three-dimensional finite element analysis. Methods: A three-dimensional finite element model was constructed to simulate mandibular teeth, periodontal ligament, and alveolar bone. The displacement of individual tooth on three-dimensional planes and the von Mises stress distribution were compared when various intrusion force vectors were applied. Results: Intrusive forces applied to 4 mandibular anterior teeth largely resulted in remarkable labial tipping of the segment according to the miniscrew position. All 6 mandibular anterior teeth were labially tipped and the stress concentrated on the labiogingival area by intrusive force from miniscrews placed mesial to the canine. The distointrusive force vector led to pure intrusion and the stress was evenly distributed in the whole periodontal ligament when the hook was placed between the central and lateral incisors and the miniscrew was placed distal to the canine. Conclusions: Within the limits of this study, it can be concluded that predictable pure intrusion of the 6 anterior teeth segment may be accomplished using miniscrews placed distal to the canine and hooks located between the central and lateral incisors.

• The Journal of the Korean dental association
• /
• v.50 no.6
• /
• pp.312-321
• /
• 2012

Permanent canine are very important teeth in point of function as well as esthetic. Therefore impaction of canines is a frequently encountered clinical problems. The incidence of impaction ranges between 1-3%. The cause of canine impaction can be result of ectopic position of tooth germ, defect of dental follicle, early loss or delayed exfoliation primary canine, space problem, supernumarary teeth, cyst, odontoma, Impaction frequently involves further complication such as root resorption of adjacent teeth, cyst formation and migration of the neighboring teeth. Various treatment modalities include extraction of primary canine, surgical opening and orthodontic traction, autotransplantation, surgical extraction of impacted canine.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.406-411
• /
• 2004

Inverted Impaction of the permanent maxillary central incisor is rare. The causes of impaction are trauma and periapical inflammation of primary maxillary incisor teeth. Treatment options for a inverted incisor is extraction, surgery and orthodontic traction, transplantation, and spontaneous eruption guidance. Treatment depends on the incisor's root development and the space available for eruption. If root development is immature, prognosis would be good. We reported successful treatment for inverted maxially central incisor of proper eruption and normal root development by correction of a eruption route. But further observation will be required to evaluate the final root development state and amount of at tachment gingiva.