• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.3
• /
• pp.237-246
• /
• 1989

A sliding memory covariance circular lattice (SMC-CL) filter and an efficient ARMA modeling method using the SMC-CL filter are presented. At first, SMC-CL filter is derived based on the geometric approach. Then ARMA process is converted into 2 channel AR process, and SMC-CL filter is applied to it. The structure of SMC-CL filter becomes simpler in case of ARMA modeling due to the whiteness of a driving input process. The parameters of ARMR process can be obtained by the Levinson recursions from the PARCOR coefficients of the second channel of the filter. Computer simulations are performed to show the effctiveness of the proposed algorithm.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.74-77
• /
• 2006

A scanned Fabry-Perot(F-P) filter and a Multi-Channel Wavelength Locker(MCWL) were used to interrogate fiber Bragg grating sensor array. When the F-P filter scans over the MCWL which works as a multi-reference the temporal peaks profiles correspond to the locking wavelengths. To solve the linearity, stability, and accuracy problems caused by the nonlinear response of F-P filter, a polynomial fitting algerian was used to calculate the relationship between the peak locations and the wavelengths in all the scanning range. Then from the reflected peaks locations and the best fitting line, the Bragg wavelengths can be obtained. The measurement linearity was greatly enhanced with wavelength resolution of about 4 pm in 10Hz scanning frequency.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.1-6
• /
• 2011

By incorporating a polarization-diversity loop configuration (PDLC), we have demonstrated inline conversion between transmission and reflection spectra of a fiber Bragg grating (FBG) without reconfiguration of the fiber filter structure. The proposed apparatus consists of a polarization beam splitter, an FBG, and two quarter-wave plates (QWP's). The inline conversion operation between transmission and reflection spectra of the FBG was performed by proper adjustment of QWP's within the proposed filter. The band rejection ratio and side-mode suppression ratio in transmission and reflection modes of the fabricated filter were measured as ~17.0[dB] and ~16.4[dB], respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.148-149
• /
• 2000

파장분할다중(WDM) 광통신시스템에서 광원의 파장을 정확하게 측정하는 것은 매우 중요하다. 지금까지 광파장측정기는 격자나 Fabry-Perot 에탈론을 사용한 광대역 필터(optical bandpass filter) 및 파장에 따라 삽입손실이 다른 파장판별기(wavelength discriminator)등으로 구현되었지만 빛의 간섭 현상을 이용한 마이켈슨 간섭계가 가장 많이 사용되었다. 특히 푸리에 변환 마이켈슨 간섭계 파장측정기$^{(1)}$ 는 동시에 각각 다른 파장의 광원들이 입사되더라도 각각의 파장을 측정할 수 있는 장점이 있다. 즉 마이켈슨 간섭계에서 주기적인 간섭무늬에 의한 광검출기의 출력은 입력된 광파장에 따라 다른 주기를 가진다. 따라서 서로 다른 파장을 가진 빛이 입사했을 때 검출되는 각각의 광전력의 합을 표본화(sampling)한 뒤 FFT를 거치면 광파장과 광검출기로 수신한 신호의 중심 주파수의 관계를 알 수 있으므로, 서로 다른 파장을 가진 빛이 입사하더라도 각각의 파장을 측정할 수 있는 것이다. 본 논문에서는 푸리에 변환을 이용하되 마이켈슨 간섭계 대신 마하젠더 간섭계형 광변조기를 이용하여 광파장을 측정에 관한 실험적 구현과 개선 방안에 대해 제시한다. (중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.291-294
• /
• 2012

본 논문에서는 주어진 환경에 대한 정보가 충분하지 않은 상황에서 지능형 에이전트에게 요구되는 스스로의 위치를 파악하기 위해 로봇이 자신의 위치 추정과 동시에 주위 환경을 인식하여 주변 지도를 작성하는 방법을 제안한다. 이동 로봇의 위치를 추정하기 위해 센서 측정값을 통해 계산된 결과 값을 파티클 필터에 적용하며 로봇의 환경 지도 작성을 위해 점유 격자 지도 방법을 사용한다. 이 두 방법을 병합하여 동시적 위치 추정 및 지도 작성 문제에 적용하여 시스템을 설계 및 구현해보고 실험결과를 소개한다.

• Korean Journal of Remote Sensing
• /
• v.19 no.4
• /
• pp.277-284
• /
• 2003

We present a GPS-derived regional ionosphere model, which estimates Total Electron Content (TEC) in a rectangular grid on the spherical shell over Korea. After dividing longitude and latitude over Korea with 1$^{\circ}$$\times$1$^{\circ}$ spatial resolution, the TEC at the vertex of the grid was estimated by the Kalman filter. The GPS data received from nine nationwide GPS stations, operated by Korea Astronomy Observatory (KAO), were used for this study. To reduce inherent noises, the pseudorange data were phase-leveled by a linear combination of pseudoranges and carrier phases. The solar-geomagnetic reference frame, which is less variable to the ionosphere movement due to the Sun and the geomagnetic field than an Earth-fixed frame, was used. During a quiet time of solar activity, the KAO's regional ionosphere map indicated 30-45 Total Electron Content Unit at the peak of the diurnal variation. In comparison with the Global ionosphere Map of the Center for Orbit Determination in Europe, RMS differences were at the level of 4-5 TECU for five days.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.1-10
• /
• 2014

In this paper, we propose MPI gridding algorithm of LiDAR data that minimizes the communication between the cores. The LiDAR data collected from aircraft is a 3D spatial information which is used in various applications. Since there are many cases where the LiDAR data has too high resolution than actually required or non-surface information is included in the data, filtering the raw LiDAR data is required. In order to use the filtered data, the interpolation using the data structure to search adjacent locations is conducted to reconstruct the data. Since the processing time of LiDAR data is directly proportional to the size of it, there have been many studies on the high performance parallel processing system using MPI. However, previously proposed methods in parallel approach possess possible performance degradations such as imbalanced data size among cores or communication overhead for resolving boundary condition inconsistency. We conduct empirical experiments to verify the effectiveness of our proposed algorithm. The results show that the total execution time of the proposed method decreased up to 4.2 times than that of the conventional method on heterogeneous clusters.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.17-21
• /
• 2004

We demonstrate an S/S＋band discretely tunable thulium doped fiber laser (TTDFL), anchored on a 50-㎓ ITU-T grid. Investigating the inversion analysis of the thulium doped fiber (TDF) in applying a dual wavelength (1.4 m and 1.5 m) pumping scheme, a laser whose tuning range covers most of the S/S＋band has been obtained. Within the wide 3-㏈ bandwidth of 65.1 nm, the output power of the tunable laser exceeds 6.1 ㏈m with very flat spectral profile and the number of DWDM channels generated is as large as 178. If we increase the subsidiary pump power to 22 ㎽, the bandwidth is expanded up to 66.2 nm. By controlling the temperature of the fine grid filter, we have also shown that the frequency locking capability of the laser can be improved. The laser developed in this work is expected to be utilized as a practical optical source providing reference wavelengths in the S/S＋band.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.135-139
• /
• 2001

This paper describes a string resonator that is used for the interrogation system of a Fiber Bragg Grating(FBG) strain sensor. The strain on the fiber piece is calculated from the measured frequency based on that the natural frequency of a string is a function of the applied absolute strain. Existing research considered a fiber as a string, but a fiber is not a string in the strict sense due to its bending stiffness, thus the fiber should be modeled as a beam accompanied with an axial force. In the vibration modeling, the relationship between the strain and the natural frequency is derived, and then the resonance condition is described in terms of both the phase and the mode shape for sustaining resonant motion. Several experiments verify the effectiveness of the proposed model of the fiber. The performance of the string resonator is analyzed by measuring the frequency change according to the applied strains in the dynamic range of 1100$\mu\varepsilon$ referred to the displacement from capacitance sensor. From the experimental results, the implemented string resonator provides the accuracy of $\pm$3$\mu\varepsilon$, the quasi-static resolution of ~0.1$\mu\varepsilon$(rms) which amount to be $\pm$0.17$\mu\textrm{m}$ and ~6nm respectively, in case of fiber length of 56mm. For a dynamic strain, it can provide the accuracy of ~3$\mu\varepsilon$ until the frequency comes to 8Hz. As a consequence, the string resonator proposed for FBG sensor provides the high accuracy and the high resolution in strain measurement, and also it is expecting to be used, for the application, to not only strain but also displacement measuring device.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.55-59
• /
• 2008

In this paper, the linearity of Doherty amplifier has been improved by applying a compact slow-wave microstrip branch-line coupler on the output of Doherty amplifier. The proposed branch coupler has four microstrip high-low impedance resonant cells periodically placed inside the branch-line coupler to result in high slow-wave effect. The new coupler not only effectively reduces the occupied area to 30% of the conventional branch-line coupler at 1.8GHz, but also has high second harmonic suppression performance. We obtained the 3rd-order intermodulation distortion ($IMD_3$) of -31.16 dBc for CDMA applications with that of maintaining the constant power added efficiency (PAE). The IMD3 performance is improved as much as -7 dBc compared with a Doherty amplifier.