• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.348-353
• /
• 1999

Ray-optics approach based on the rigorous coupled wave theory, called by the rigorous ray-optics method (RROM), is developed for the calculation of couling coefficients of waveguide grating devices. The coupling coefficients of several grating structures, such as rectangular, sinusoidal, triangle, and trapezoidal shapes, are determined by the RROM, and they are compared with those obtained by conventional methods of the ray-optics method (ROM) and the coupled mode method (CMM). In the case of rectangular gratings, the coupling coefficients is evaluated in detail by various depths and duty-cycles of the grating. We have found that the RROM gives more exact solutions for the coupling coefficients of even arbitrary shapes of diffractive waveguide grating devices than the other conventional methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.10
• /
• pp.669-676
• /
• 2022

In this paper, the carriage load analyses of stores installed on aircraft are conducted to validate the chimera grid method applied to an unstructured CFD solver, UMSAPv. First, the chimera grid method of UMSAPv is verified for the well-known Eglin Wing/Pylon/Finned store problem. Next, an angle of attack sweep of F/A-18C clean configuration is conducted at a subsonic speed. The computed results are compared with the results of the previous study using MSAPv, a structured CFD solver, to show the validity of Umsapv. Finally, the carriage of F/A-18C JDAM is carried out with a chimera grid as well as a single block grid. The computed results are compared with other computational, experimental and the flight tests.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.436-436
• /
• 2022

셀룰러 오토마타(Cellular Automata; CA)는 격자(cell)에 대해 사전 정의된 규칙을 바탕으로 이웃 격자 간 상호작용을 해석하여 복잡한 동력학적 현상을 효과적으로 재현할 수 있는 이산형(discrete) 모의 기법이다. CA 기법은 격자 구조에 수치표고 자료 및 토양수분 정보 등을 직접 매칭 후 상호관계를 해석하기 때문에 공간정보를 최대한 활용하여 불균질성을 나타내는 것이 가능하다. 따라서, 도시 유출해석에 있어서 높은 정확도와 빠른 계산속도를 기대할 수 있다. 본 연구에서는 CA 기반 고해상도 물순환·침수 연계 해석 framework 개발 방향 및 CA 기반 prototype 모형의 사면유출 적용 사례를 소개한다. 개발 중인 CA 모형에서는 격자별 침수 깊이, 침투, 토양수분 저류, 지표 유출 등의 물순환 요소를 모의할 수 있다. 기존의 집중형(lumped) 모형은 지표-지표하 유출에 대한 routing algorithm이 없고 각 셀의 물수지 모형 내 파라미터가 많은 단점이 있다. 따라서 개발 중인 CA 모형에서는 cell state 내 fast reservoir와 slow reservoir를 통해 지표-지표하 상태를 구현하고 단순화된 물수지 모형 및 흐름 방향 알고리즘을 적용함으로써 실제 현장에서 발생하는 다중 피크 형태의 지표 유출을 모사한다. 최적의 지표수 흐름 방향 알고리즘 선정을 위해 3개의 다중 흐름 방향 알고리즘(D4, D8, 4+4N)을 정량적으로 비교·분석한다. 이번 발표에서는 CA 모형을 소규모 산지 사면과 도심지 등 다양한 규모의 테스트베드에 적용하여 모형의 장단점을 평가한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.247-256
• /
• 2019

In this study, 2-D Godunov type finite volume model which can apply the mixed mesh including triangular and quadrilateral meshes for flood inundation modeling is used to compare and analyze the flood height, flood extent and model execution time according to mesh type and resolution. The study area is the Upton-upon Severn watershed in Great Britain, where the flood occurred for 22 days from October 29 to November 19, 2000. For the flood modeling, topographic data were constructed using high resolution LiDAR (Light Detection And Ranging). The results of the 2-D flood modeling by the mesh type and resolution were compared with four ASAR (Airborne Synthetic Aperture Radar) images captured during the flood period. This study has shown that flood height and extent can vary greatly depending on the mesh type and resolution, even if identical topography and boundary conditions are used, and that the selection of appropriate mesh type and resolution for the purpose and situation of the 2-D flood modeling is necessary.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.33-38
• /
• 2004

In this paper, we review a trellis-coded orthogonal frequency division multiplex (TC-OFDM) system, which combines OFDM with trellis-coded modulation, for overcoming the frequency selective and multipath fading of time dispersive channels. We simulate and analyse the BER performance of rate 2/3 trellis coded 8DPSK-OFDM over time dispersive channels. Design of the trellis codes at different carrier numbers of OFDM is discussed. Results show that TC-OFDM system can provide 6 dB coding gain at a BER of 10$^{-3}$ compared with OFDM system without coding.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.1-11
• /
• 2004

A comprehensive study has been made for the investigation of the convergence and stability characteristics of the LU scheme for solving the Navier-Stokes equations on unstructured meshes. For this purpose the characteristics of the LU scheme was initially studied for a scalar model equation. Then the analysis was extended to the Navier-Stokes equations. It was shown that the LU scheme has an inherent stiffness in the streamwise direction. This stiffness increases when the grid aspect ratio becomes high and the cell Reynolds number becomes small. It was also shown that the stiffness related to the grid aspect ratio can be effectively eliminated by performing proper subiteration. The results were validated for a flat-plate turbulent flow.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.176-183
• /
• 2011

Applicabilities of two 3-D hydrodynamic models on Chungkye Bay in which tidal flats are well developed were examined. Both EFDC model and ESCORT model with the ${\sigma}$-coordinate showed fairly good results. However, their efficiencies were lowered especially on the tidal flats due to dense vertical grids. This inefficiency could be overcome by using the z-coordinate of the ESCORT model keeping similar accuracy.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.84-90
• /
• 2007

In this paper, the demonstration of a 130-channel optical demultiplexer based on the cascaded volume holographic gratings is presented. By serially adding the second holographic grating, which has different grating period, slant angle, and center wavelength compared to those of the first grating, the operating wavelength range of the optical demultiplexer could be expanded, and therefore, the number of channels of the holographic demultiplexer is increased by twice. As a result of the experiment, a 0.4-nm-spaced demultiplexer with the channel uniformity of 3.5 dB, the 3dB-bandwidth of 0.12nm, and the channel crosstalk of -20dB is experimentally achieved.

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.176-182
• /
• 2020

The possibility of replacing the condensing-prism film used in conventional backlight units with a light-guide plate engraved with a submicrometer-periodic diffraction grating was investigated. The optimal period for the diffraction grating was determined through simulation and experiment, and the transmission-mode efficiency of the diffraction grating was calculated in terms of the polar angle and azimuthal angle of the incident light. In addition, the effects of the two methods of optimizing the polar angle and the directional angle were compared by simulation, by suggesting the shape and configuration of the light-guide plate, so that more light could be extracted by diffraction. By using a ray-tracing program, the luminance angular distribution of the light-guide plate engraved with the diffraction grating was calculated and compared to the luminance angular distribution for each actual prototype.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.934-940
• /
• 1991

A modified quantizing method is introduced to teach single layer learning algorithm, which is implemented optically. The proposed optical system consists of input masks, holographic diffraction grating. LCD and CCD camera. The 2 dimensional interconnections between input neurons and output neurons are realized using holographic phase grating, which is fabricated for equal intensity distribution of diffraction orders. The two gray levels of LCD act as binary weights for each interconnection. The weights are compensated according to the learning algorithm in which the amount of weights to be compensated is determined by comparing the output patterns with target patterns. The learning process is iterated until the predetermined conditions are satisfied. Optical experiments are performed for two learning rates, 0.5 and 0.9 and the experimental results show that the proposed system is useful for optical neural networks.