• Title/Summary/Keyword: 격자간 Zn

Search Result 9, Processing Time 0.022 seconds

Influence of NiO additive on electrical properties of ZnO-based ceramic varistors (ZnO세라믹 바리스터에 NiO첨가가 전기적 특성에 미치는 영향)

  • 남춘우
    • Electrical & Electronic Materials
    • /
    • v.9 no.6
    • /
    • pp.542-550
    • /
    • 1996
  • ZnO-based ceramic varistors containing NiO range 0.5 mol% to 4.0 mol% were fabricated by standard ceramic techniques. The influence of NiO on the microstructure and electrical behavior of ZnO varistor was investigated. As the content of NiO additive increases, average grain size decreased from 16.5.mu.m to 13.2.mu.m, and the amount of NiO existing in the grain interior and grain boundary region was approximately equal. NiO acted as an acceptor which decreases donor concentration due to the increase of Zn vacancy in the grain, and as a driver which migrates Zn interstitial in the depletion region toward the interface of grain boundary, which resulted in the decrease of interface state density. As a result, increasing the content of NiO additive, barrier height, nonlinear exponent, and varistor voltage decreased, and leakage current increased. Wholly, the physical and electrical properties of the ZnO varistor can be said to be affected by the NiO additive.

  • PDF

A Study on the Shock Compaction of Ceramic Powders using Explosive (폭약을 이용한 세라믹분말의 충격고화에 관한 연구)

  • Kim, Young-Kook;Kim, See-Jo;Cho, Sang-Ho
    • Tunnel and Underground Space
    • /
    • v.22 no.2
    • /
    • pp.157-161
    • /
    • 2012
  • ZnO-98% and $Ga_2O_3$-2% powder were consolidated by shock compaction technique, which uses a high performance explosive. The microstructural and electrical characteristics of $ZnOGa_2O_3$ compact with density of 97% and hardness of 220~250 $H_v$ were investigated using SEM (Scanning Electron Microscope) and X-ray diffraction analysis, respectively. In the microstructures of the compact, there were no visible cracks at most of the surface areas, and interparticle bonding between powder particles was confirmed. The broadened peaks were detected due to deformation of crystallited size and high electric resistances were confirmed due to increased grains because of shock energy with a high pressure and high velocity.

The Influence of Ba Shortage on the Microwave Dielectric Properties of Ba Ba(Zn$_{1}$3Ta$_{2}$3)O$_3$ (BA 결핍이 Ba(Zn$_{1}$3Ta$_{2}$3)O$_3$의 마이크로파 유전 특성에 미치는 영향)

  • 이문길;윤광희;이두희;박창엽
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1993.11a
    • /
    • pp.6-9
    • /
    • 1993
  • In this study, Sintering behavior, Crystallographic structure, Microwave Dielectric properties of the nonstoichiometric Ba$\_$1-x/(Zn$\_$1/3/Ta$\_$2/3/)O$_3$with 0 x 0.04 were investigated. A small amount(lmol%) of MnO$_2$is doped to the sample to complete the sintering. The degree of Zn and Ta ordering in B site and Lattice distortion were promoted by reducing Ba concentration. At x=0.01, Unloaded Q value reached above 7500 (at 10.5 GHZ) ; however, above x=0.01, Q value was greatly decreased, in spite of saturation in Zn-Ta ordering. At x=0.01, The Dielectric constant was 30 at 10.5GHz. and The Temperature Coefficient was estimated as 2ppm/$^{\circ}C$.

  • PDF

The electron density distribution and the structure of semiconductor HgCdTe (반도체 HgCdTe의 전자 밀도 분포와 결정 구조)

  • Kook-Sang Park;Ky-Am Lee
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.4 no.4
    • /
    • pp.388-394
    • /
    • 1994
  • A Hg(0.79)Cd(0.21)Te single crystal has been grown by the Traveling Heater Method(THM). Its zinc blend cubic structure is identified from the X-ray diffraction patterns and its lattice constant is determined to be $6.464 {\AA}$ using the least-square method of Cohen. From the values of the lattice constant, the composition x is determined to be 0.21. The electron density is calculated from the relative intensities of the scattered X-ray and compared with the theoretically calculated values. From the electron density distribution, it is shown that the crystal binding of Hg(1-x)Cd(x)Te(MCT) is mainly covalent and has tetrahedron bonds between adjacent atoms.

  • PDF

Mössbauer Study on Crystallographic and Magnetic Properties of Mechanical Alloying Fe-M(M=Cr, Mn, Cu, Zn) Powders (기계적 합금화한 Fe계 분말 특성에 관한 뫼스바우어 분광학적 연구)

  • Park, Jae-Yoon;Choi, Jae-Joo
    • Journal of the Korean Magnetics Society
    • /
    • v.17 no.1
    • /
    • pp.26-29
    • /
    • 2007
  • Fe-based powders, Fe-M(M=Cr, Mn, Cu, Zn), were prepared in Ar gas by mechanical alloying and their crystallographic and magnetic properties were investigated. X-ray diffraction indicates that the cubic lattice parameter increases for the M substitution. The distance of closest approach around M can explained the increase of lattice constant in Fe-M powders. $M\"{o}ssbauer$ spectroscopy measurements on Fe-M samples indicates the coexistence of ferromagnetic phases and paramagnetic phase that are created by the distribution of local environment M on Fe atom. On the other hand, The spread of line-width on $M\"{o}ssbauer$ spectra can be explained by the distribution of hyperfine magnetic fields. The results of quadrupole shift and isomer shift revealed that M substitutions in Fe-M powders didn't change both structure and the local charge distribution around Fe atom severely.

Assessment of Contamination and Geochemical Dispersion by Heavy Metals in Roadside Tree Leaves of Platanus occidentalis and Soils in the City of Seoul (서울시 가로수목 중 플라타너스 잎과 토양의 중금속 원소에 대한 지구화학적 분산과 오염평가)

  • Choo, Mi Kyung;Lee, Jin-Soo;Lee, Jeonghoon;Kim, Kyu-Han
    • Economic and Environmental Geology
    • /
    • v.47 no.4
    • /
    • pp.405-420
    • /
    • 2014
  • To investigate geochemical characteristics of soil and atmospheric environments by anthropogenic source, we have analyzed and determined heavy metal concentrations of the surface soils beneath roadside trees and leaves of Platanus occidentalis from 52 points in Seoul during autumn 2001. For comparison of the contents of heavy metal for the soil and leaf, we have analyzed heavy metal contents of the surface soils beneath roadside trees and leaves from 2 points in rural area of Yesan during the same time period. The composition of heavy metals of soils are relatively high for Cd, Co, Cr and Ni in industrial area (IA, Industrial Area) and high for Cu, Pb and Zn in heavy traffic area (HTA, Heavy Traffic Area). The heavy metal contents of rural area in Seoul are higher than those in Yesan. The differences of chemical compositions between the washed and unwashed leaves are high for Cd, Cu, Pb and Zn in the HTA. The element couples of Cd-Co, Cr-Ni and Pb-Zn for the soils had shown a good correlation and their contamination sources could be similar. The relationship for Pb-Cu and Cu-Zn showed good correlation in Platanus leaves. The relationship between soils and unwashed leaves show a good correlation for Cr, Cu, Pb and Zn but low correlation for Cd, Co, Fe, Mn and Ni. It is thought that the Cr, Cu, Pb and Zn were derived from contaminants of soils, whereas Cd, Co, Fe, Mn and Ni were originated from atmospheric source. From the spatial variations of elements for soils and leaves, Ni and Cr were dominant in the soils of IA and Cd, Cu and Zn were dominant in those of HTA. The Contamination by Cd-Pb and Cu-Zn in unwashed leaves were analyzed to show similar patterns. Using the enrichment factors (EF) of heavy metals in unwashed leaves, the EF sequences were to be Cu, Zn, Pb, Mn, Co, Ni, Cd and Cr. We identified that Cu, Zn, Pb and Mn were most problematic of environmental hazard in Seoul.

Preliminary study on geochemical elements concentration changes in coral skeleton from Chuuk, Micronesia (마이크로네시아 축 경산호 골격의 지화학 원소 농도에 대한 예비연구)

  • Hyun, Sang-Min;Park, Heung-Sik;Kim, Su-Hyun;Kim, Han-Jun;Jang, Suk
    • The Korean Journal of Quaternary Research
    • /
    • v.22 no.1
    • /
    • pp.1-12
    • /
    • 2008
  • We investigated metal concentrations and oceanic environment changes that have occurred over the past several years by studying the hard coral Porites lutea, which inhabits tropical and subtropical areas. Soft X-radiographs clearly showed distinctive annual bands within 71 mm coral sample, which reflect changes in the oceanic environment over this period. There were large fluctuations in the major and minor element concentrations. Considering the physicochemical partition coefficient, some elements accumulated in the aragonite matrix in a mechanical manner, while others were affected by environmental factors. The concentrations of some heavy metals varied over a wide range, implying local environmental effects. The variation of Sr/Ca and Mg/Ca in coral skeleton clearly showed large-scale fluctuation over the specific intervals, implying environmental changes during this period. The concentrations of heavy metals also show high fluctuations, and roughly accord with Mg/Ca variation. In addition, Cu and Zn seem to show cyclicity-like peaks, coincide with Mg/Ca variation over the specific intervals. Such variation might be related to local pollution and oceanographic changes. More detailed investigation is necessary, including the pretreatment of coral skeleton sediment.

  • PDF

Corrosion resistance and crystal growth mechanism of Mg films prepared on steel substrate and hot dip aluminized steel by PVD sputtering method (PVD 스퍼터링법에 의해 강판 및 용융알루미늄 도금강판 상에 제작한 Mg 코팅막의 결정성장 메커니즘과 내식특성)

  • Park, Jae-Hyeok;Lee, Seul-Gi;Park, Jun-Mu;Mun, Gyeong-Man;Yun, Yong-Seop;Jeong, Jae-In;Lee, Myeong-Hun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.115-115
    • /
    • 2018
  • 철강재는 대량 생산이 가능하며 경제성이 뛰어나고 기계적 성질도 우수하므로 다양한 산업 분야에서 널리 사용되고 있다. 그러나 철강재는 부식 환경에 취약하기 때문에 그 용도에 따라 다양한 내식성을 부여하는 표면처리를 적용하고 있다. 일반적으로 이러한 철강 재료에 대한 내식성 표면처리로는 습식공정을 이용한 아연(Zn)도금 표면처리가 널리 적용되고 있다. 그러나 최근에는 이러한 습식공정으로 인해 발생하는 자원소모 및 환경적인 문제와 더불어 고내식성 표면처리 소재에 대한 수요가 증가함에 따라 이러한 단점을 극복할 수 있는 새로운 소재 및 기술 개발에 대한 관심이 증대되고 있다. 이러한 관점에서 기존의 습식표면처리 공정을 건식으로 대체 또는 병행하고, 현행 아연소재를 대체할 수 있는 코팅소재로써 알루미늄(Al) 이나 마그네슘(Mg)으로 대체하는 방법이 시도되고 있다. 본 연구에서는 강판의 내식성을 향상시키기 위한 방법으로 기존의 습식 표면처리 공정에서 용이하지 않은 마그네슘을 이용하여 건식 PVD 프로세스에 의해 코팅막의 제작을 시도하였다. 그리고 코팅막 제작 조건 중에서 공정압력이 코팅막의 결정배향성에 미치는 영향과 내식성과의 상관관계를 규명하고자 하였다. 즉, 여기서는 강판 및 용융알루미늄 도금강판 상에 스퍼터링법에 의해 Ar 가스에 의한 공정압력을 2, 10 및 50 mTorr로 조절하면서 마그네슘 코팅막을 $2{\mu}m$ 두께로 각각 제작하였다. 이때 제작한 막의 표면 모폴로지 관찰(SEM) 및 결정구조 분석(XRD) 결과에 의하면, 강판 및 용융알루미늄도금강판 상에 제작한 코팅막들은 공통적으로 공정압력이 증가할수록 그모폴로지의 결정립의 크기가 작고 치밀한 구조로 변하였다. 또한 그때 형성된 코팅막의 결정구조는 표면에너지가 상대적으로 높은 Mg(002)면 피크의 점유율이 감소하고 표면에너지가 낮은 Mg(101)면 피크의 점유율이 증가하는 경향을 나타내었다. 그리고 공정압력이 증가할수록 Mg 격자 간 면 간격(d-value)이 증가하는 경향을 나타내었다. 이상에서 제작한 마그네슘 코팅막의 결정성장 과정은 본 진공 플라즈마 PVD 공정중 증착가 더불어 흡착역할을 하는 Ar의 움직임에 따라 설명 가능하였다[1,2]. 코팅막의 양극분극(Polarization)측정 결과에 의하면, 공정압력이 높은 조건에서 제작한 막일수록 부동태 특성이 우수하여 내식성이 향상되는 경향을 나타내었다. 특히, 공정압력이 상대적으로 높은 50 mTorr 조건에서 제작된 코팅막이 표면 마그네슘 결정의 크기가 조밀하고 결정구조는 Mg(002)면과 Mg(101)면의 상대강도 비가 유사하여 내식성 가장 우수하였다.

  • PDF

Estimation of Precipitable Water from the GMS-5 Split Window Data (GMS-5 Split Window 자료를 이용한 가강수량 산출)

  • 손승희;정효상;김금란;이정환
    • Korean Journal of Remote Sensing
    • /
    • v.14 no.1
    • /
    • pp.53-68
    • /
    • 1998
  • Observation of hydrometeors' behavior in the atmosphere is important to understand weather and climate. By conventional observations, we can get the distribution of water vapor at limited number of points on the earth. In this study, the precipitable water has been estimated from the split window channel data on GMS-5 based upon the technique developed by Chesters et al.(1983). To retrieve the precipitable water, water vapor absorption parameter depending on filter function of sensor has been derived using the regression analysis between the split window channel data and the radiosonde data observed at Osan, Pohang, Kwangiu and Cheju staions for 4 months. The air temperature of 700 hPa from the Global Spectral Model of Korea Meteorological Administration (GSM/KMA) has been used as mean air temperature for single layer radiation model. The retrieved precipitable water for the period from August 1996 through December 1996 are compared to radiosonde data. It is shown that the root mean square differences between radiosonde observations and the GMS-5 retrievals range from 0.65 g/$cm^2$ to 1.09 g/$cm^2$ with correlation coefficient of 0.46 on hourly basis. The monthly distribution of precipitable water from GMS-5 shows almost good representation in large scale. Precipitable water is produced 4 times a day at Korea Meteorological Administration in the form of grid point data with 0.5 degree lat./lon. resolution. The data can be used in the objective analysis for numerical weather prediction and to increase the accuracy of humidity analysis especially under clear sky condition. And also, the data is a useful complement to existing data set for climatological research. But it is necessary to get higher correlation between radiosonde observations and the GMS-5 retrievals for operational applications.