• The Korean Journal of Rheology
• /
• v.8 no.3_4
• /
• pp.199-206
• /
• 1996

산마와 재배마에서 점질다당류를 추출하여 리올러지 및 열특성을 연구하였다. D.I.W 에서 산마와 재배마 점질다당류의 고유점도(η)는 각각 16.1 이/g. 25.1 이/g 이고 pH7일 때 최대값을 나타내었고 염을 가했을 때 (η)가 급격히 감소하다가 일정한 값을 나타내었으며 urea 용액에서 NaCl, MaCl2 용액에서보다 (η)가 높았다. 마 점질다당류의 chain stiffness는 0,0050이고 Overlap parameter는 산마와 재배마 점질다당류가 각각 0.06 g/이. 0.04 g/이였 다. 마 점질 다당류는 shear rate가 증가함에 따라 겉보기 점도가 감소하여꼬 농도가 증가함 에따라 yield stress 와 점조성 지수는 증가하고 shear index가 감소하는 가소성유동체였다. 산마 점질다당류는 35$^{\circ}C$까지 온도에 대하여 비교적 안정하였지만 그이상의 온도에서는 겉보 기 점도가 급격히 감소하였고 재배마 점질다당류는 온도가 증가할수록 겉보기 점도가 점차 적으로 감소하였다. 겉보기 점도는 1가 염가 2가 염 사이에 큰 차이가 없었고 염농도가 증 가함에 따라 겉보기 점도가 감소하였으나 urea를 첨가했을 때 겉보기 점도가 약간 감소하다 가 다시 증가하는 것을 알수 있었다. DSC로 산마와 재배마 점질다당류의 "true melting"을 측정했을 때 각각 92$^{\circ}C$, 93$^{\circ}C$였고, enthalpy는 67.06 cal/g, 75.83 cal/g였다. 겔화에 소요된 enthalpy는 pH가 증가할수록 큰 값을 나타냈고 NaCl을 첨가했을 때 감소하다가 염농도 증 가에는 영향을 받지 않았으며 Urea와 glycerol을 각각 첨가했을 때 D. I. W.오세보다 감소 하였다. TGA로 열분해 현상을 측정했을 때 분해 온도는 산마와 재배와 점질다당류가 각각 219~332$^{\circ}C$, 229~341$^{\circ}C$ 범위였다.TEX> 범위였다.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.815-819
• /
• 1989

Rheological properties of chestnut starch suspensions (3 and 4%, db) and gelatinized starch (4%, db) were investigated with a capillary and rotational viscometer, respectively. Starch suspensions had no yield stress and showed dilatant flow behavior in the temperature ranges of $30-65^{\circ}C$. However, starch suspension showed pseudoplastic flow behavior at $70^{\circ}C\; and\;above\; 65^{\circ}C$ for 3 and 4% concentration, respectively Flow activation energy below $50^{\circ}C$ was 0.56 kcal/mole but increased to 51.9-80.8 kcal/mole at $60-70^{\circ}C$. The behavior of gelatinized starch (4%) was pseudoplastic regardless of heating temperature $(65-80^{\circ}C)$ and time (15-60 min). The apparent viscosity of the starch remained constant after heating at $80^{\circ}C$ for 45 min. The swelling power and log apparent viscosity showed similar pattern. The activation energy of the apparent viscosity of the geletinized starch at $70-80^{\circ}C$ was 13.09kcal/mole. The apparent viscosity of thermal-gelatinized $(90^{\circ}C)$ starch was lower than that of 15 psi-gelatinized starch.

• Journal of the Korea Convergence Society
• /
• v.10 no.2
• /
• pp.41-48
• /
• 2019

The effects of HPMC (hydroxypropyl methylcellulose) on instant fried noodles regarding oil uptake and in vitro lipid digestibility were evaluated according to different viscosity levels, as well as the same apparent viscosity. The oil uptake and lipid digestibility decreased with the increasing HPMC viscosity and replacement level, demonstrating that the reduced oil uptake and lipid digestibility may be caused by the high viscosity of HPMC. Furthermore, the oil uptake and lipid digestibility of noodles with HPMC at both apparent viscosities decreased with the increasing viscosity of HPMC in spite of having the same apparent viscosity. As a result, the high viscosity of HPMC on instant fried noodles was more critical factor compared to apparent viscosity for lowering oil uptake and lipid digestibility.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.181-191
• /
• 1995

점탄성유체의 물성치들 중 정압열팽창계수 및 밀도는 자연대류 열전달 연구에 전단 속도 0에서의 점도는 점탄성유체에 대한 모델들 사용 시 필요하다. 본 연구에서는 점탄성유 체이며 마찰 감소 첨가제, 유전자 분리용액동으로 사용하는 Separan AP-273 용액의 정압열 팽창계수, 밀도 및 전단속도 0에서의 점도에대한 농도 및 온도의 영향을 조사하였다. 작동유 체의 물성치들은 10~6$0^{\circ}C$의 온도범위와 100~20,000wppm의 농도범위에서 측정되었다. 작 동유체의 물성치들에 미치는 열주기와 노화의 영향을 조사하기 위해서 정압열팽창계수와 전 단속도 0에서의 점도를 교대로 두 번씩 측정했다. 정압열팽창계수 및 밀도를 측정하는 장치 의 측정 정밀도는 증류수에 대한 측정치와 문헌에 나타난 자료를 비교하여 얻었고 이는 $\pm$ 2%이내였다. Separan AP-273용액의 정압열팽창계수 및 밀도는 증류수의 값들로 대치될수 있다. 작동유체의 정압열팽창계수와 밀도는 열주기와 노화의 영향을 받지 않았다. 낙하식 점 도계를 사용해 측정한 겉보기점도 값들을 나타내느 flow curve에서 전단속도가 0이 되는방 향으로 겉보기점도를 외삽시켜 Separan AP-273용액에 대한 전단속도0에서의 점도를 얻었 다. 정압열팽창계수 측정 전후에 측정한 작동유체에 대한 전단속도 0에서의 점도는 열주기 와 노화로 인해 퇴화되었다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.11a
• /
• pp.50-56
• /
• 1992

공업재료의 표면은 수많은 돌기들로 구성되어 있으며 이러한 돌기들의 접촉으로 진실접촉이 이루어진다. 그러므로 마찰은 겉보기 접촉면적과는 무관하며 진실접촉면에서 일어난다. 표면의 한 돌기가 접촉면과 상대운동을 함으로 인하여 마찰열이 발생된다. 이러한 마찰에너지 발산의 결과로서 진실접촉면적 주위의 국부적인 표면 온도가 상승되며 따라서 표면의 평균온도가 상승된다. 이러한 표면온도를 결정하기 위한 이론적 및 실험적인 방법이 많이 제시되어왔다. 정적상태에서의 표면온도는 Block(1937)과 Jaeger(1942)에 의해 이론적으로 소개하였다. Jaeger는 열원의 위치와 상대적인 접촉운동 그리고 크기 및 경계조건 등의 특정한 조건 하에서 진실접촉점의 온도를 계산하였다. 이에 Bany와 Baber(1984)는 그들의 경계조건이 잘목 정의되었음을 지적하고 더욱 세분화된 경계조건으로 온도분포를 유도한 바 있다. Ling(1969)은 접촉점에서의 온도가 주변의 겉보기 접촉면적의 온도보다 훨씬 높다는 것을 수치해석으로 밝혀냈다. 본 연구는 고속정밀촬영기를 이용하여 진실접촉점에서 발생하는 Hot spot의 온도분포를 실험을 통하여 규명하고 그 결과를 Geoim과 Winer의 이론식에 적용하므로 식의 유용성을 검증하는데 그 목적이 있다.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1151-1157
• /
• 1997

The chemical identities of purified polysaccharide, methylan, were analyzed by various chemical methods. The polysaccharide contained 79%(w/w) sugar, 6% protein, and 16% organic acids such as uronic acid, pyruvic acid, and acetic acid. With proceeding fermentation, the acids content in methylan increased from 10% at 34 hr to 17% at 72 hr, and the viscosity of methylan in the same concentration also increased. The correlation between viscosity and acid content in methylan was studied using chemically or biologically modified methylan. Methylan with a high content of pyruvic acid exhibited a high apparent and an intrinsic ·viscosity. When the pyruvic acid content of methylan with the same content of uronic acid was increased 1%, apparent viscosity and intrinsic viscosity increased 290 cp and 6 dL/g, respectively. Methylan with a high content of uronic acid exhibited a high apparent and an intrinsic viscosity. When the uronic acid content of methylan with the same content of pyruvic acid was increased 1%, apparent viscosity and intrinsic viscosity increased 85 cp and 1.5 dL/g, respectively. It was found that the increased viscosity of methylan resulted from the increased content of organic acids in methylan, and pyruvic acid was more an important factor contributed to the increase of methylan viscosity than uronic acid.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.196-201
• /
• 2001

Electro-Rheological(ER) fluids change their apparent viscosity according to the electric field strength. Therefore, there are many practical applications using the ER fluids. ER effect on the dispersive system of polarizable fine powder/dielectric oil has been investigated. The electrical and rheological properties of starch based ER fluid were reported. Yield stress of the fluids were measured on the couette cell type rheometer as a function of electric fields, particle concetrations, and temperatures. The electric field is applied by high voltage DC power supply, The outer cup is connected to positive electrode(+) and the bob becomes ground(-). And the temperatures the viscosity(or shear stress) versus shear rates were measured. In this experiment shear rates were increased from 0 to 200s$^{-1}$ in 2 minutes. This thesis presents Bingham properties of ER fluids subjected to temperature variations. The temperature dependence of the viscosity was determined for ER fluids consisting of 35 weight % starch particles in automatic transmission oil.

• Korean Journal of Food Science and Technology
• /
• v.16 no.4
• /
• pp.451-456
• /
• 1984

Rheological properties of gelatinized rice starch solutions were investigated with Brookfield rotational viscometer. The 8% starch solution showed thixotropic behavior with yield stress. The alkali gelatinized starch was more thixotropic than the thermal gelatinized one. The time dependent characteristics of starch solutions followed Tiu's model. The value of rate constant $(a_1)$ in Tiu's model increased linearly with shear rate, and was exponentially dependent on concentration and temperature. Temperature dependency of rate constant and apparent viscosity followed Arrhenius type equation and the activation energy were about 14.3 and 6.8 Kcal/g mole, respectively. The $a_1-value$ was found to be useful to evaluate changes in structaral decay on the shearing time of gelatinized rice starch solutions.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1147-1155
• /
• 1996

In the spray drying with rotating wheel atomizer of cheese powder, the relationships among variables were analyzed with Response Surface Methodology in which several independent variables such as total solid content, wheel rotation speed, and outlet temperature influenced dependent variables such as particle diameter, moisture content, bulk density, and viscosity of suspended liquid. Significance and correlation were tested according to central composite design. As a results of analyzing the correlations between independent and dependent variables, particle diameter and moisture content of cheese powder were decreased with increasing wheel rotation speed, and bulk density was decreased with increasing outlet temperature. Viscosity of suspended liquid were increased with increasing wheel rotation speed and total moisture content. In correlation among dependent variables, moisture content was proportional to bulk density, and particle diameter was inversly proportional to moisture content and bulk density.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.638-643
• /
• 1999

In this study we prepared 5 types of nutritional beverage base samples containing various ratios of soy protein isolate (SPI) and sodium caseinate as protein source. The rheological properties of each sample were measured and the results were as followes; Samples changed their rheological properties with the ratio of SPI. Samples represented newtonian property with low ratio of SPI, pseudoplastic property with the increment of SPI, and bingham pseudoplastic property with higher increment of SPI (80% as protein source). In this result we conjectured that the more was the SPI, the more was the formation of progel during heat treatment, which could be the reason of the rheological changes. In the test of the relationship between temperature and apparent viscosity, apparent viscosity of samples decreased along with the increment of temperature. In observing the relationship between time and apparent viscosity, we found sample, containing high ratio of SPI (80%), represented thixotropic property clearly with the hysteresis loop.