• 한국화재소방학회논문지
• /
• 제15권4호
• /
• pp.34-40
• /
• 2001

HPMC의 자연발화는 일정한 주위온도에서 자연발화의 연구와 Godbret-Greenwald가 고안한 전기로에서 운상상태의 최소발화온도를 구하였으며, 시료를 용기에 충전했을 경우 용기의 크기가 클수록 발화한계 온도는 낮아졌으며 겉보기활성화에너지는 Frank-Kamenetskii의 열발화이론으로부터 계산하였고, 운상상태의 발화온도는 21%의 산소농도하에서 최소발화온도를 구하였으며, 산소농도 변화의 실험결과 산소농도 10%에서 발화되지 않았으며 한계산소농도를 구할 수 있었다.

• 한국식품영양과학회지
• /
• 제23권5호
• /
• pp.822-826
• /
• 1994

Effects of concentration(6-9%, db) , heating temperature (80-95$^{\circ}C$), cooking time (10-50min) and heating method (continuous and instantaneous) on the apparent viscosity of cowpea sediment dispersions at 6$0^{\circ}C$ were investigated. The instantaneous heating resulted in higher apparent viscosity than continuous heating regardless concentrations and heating temperatures. The activation energy of the increase rate constant of the apparent viscosity was about 8 kcal/mole. The apparent viscosity of the cowpea sediment dispersion heated to 95$^{\circ}C$ and held for 20 min showed a linear relation with the 20 min height at 92.5$^{\circ}C$ by viscoamylograph.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.947-952
• /
• 2001

The prediction model is proposed to estimate the variation of compressive strength of fly ash concrete with aging. After analyzing the experimental result with the model, the regression results are presented according to fly ash replacement content and water/cement ratio. Based on the regression results, the influence of fly ash replacement content and water/cement ratio on apparent activation energy was investigated. According to the analysis, the model provides a good estimate of compressive strength development of fly ash concrete with aging. As the fly ash replacement content increases, the limiting relative compressive strength and initial apparent activation energy become greater. The concrete with water/cement ratio smaller than 0.40 shows that the limiting relative compressive strength and apparent activation energy are nearly constant according to water/cement ratio. But, the concrete with water/cement ratio greater than 0.40 has the increasing limiting relative compressive strength and apparent activation energy with increasing water/cement ratio.

• 한국식품영양과학회지
• /
• 제33권2호
• /
• pp.447-450
• /
• 2004

목재에 코팅재로 사용되는 에폭시 수지로부터의 총괄이행량에 대한 모델을 정립하고, 이를 이용하여 안전성확보에 필요한 두께의 정도를 계산하였다. 에폭시 수지를 통한 총괄이행은 위생적 관심영역에서 확산모델에 의하여 해석이 가능하였고, 투과성 겉보기 투과성 지표에 미치는 온도의 영향은 Arrhenius 방정식으로 설명이 가능하였다. 그리고 일반적인 식품공전의 6$0^{\circ}C$, 30분의 용출조건에서 위생적 한도를 만족시키기 위한 최소의 코팅두께는 0.004 mm였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.388-393
• /
• 2004

Creep behavior of Ti had been studied in a stress from 9.8 to 29.4 MPa and temperature rang from 873K to 973K with a special reference to tertiary creep. It was found that stress exponent of Ti was larger than that of the general pure metal and the compound metal. The relationship between true strain and strain rate in tertiary creep was appeared as the equation, $ln{\dot{e}}$ = $ln{\dot{e}}_{0}$ + ${\Omega}$ e Also, Apparent activation energy of was appeared as 274.92kJ/mol by using the equation ${\dot{\varepsilon}}_{0}$ = A ${\sigma }_{0}^{\ast_0}$ exp$(-Q_{0}/RT)$

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1010-1021
• /
• 1999

Camouflage measures in military purpose utilize the apparent temperature difference between target and background, so it is essential to develop a thermal analysis program for apparent temperature predictions and to apply some camouflage measures to real military targets for camouflage purpose. In this study, a thermal analysis program including conduction, convection and radiation is developed and the validity of radiation heat transfer terms is examined. The results show that longwave radiation along with solar radiation should be included in order to predict the apparent temperature as well as the physical temperature precisely. Longwave emissivity variation as an effective camouflage measures is applied to a real M2 tank. From the simulation results, it is found that an effective surface treatment, such as painting of a less emissive material or camouflage clothing, may provide a temperature similarity or a spatial similarity, resulting in an effective camouflage.

• 상하수도학회지
• /
• 제10권3호
• /
• pp.64-72
• /
• 1996

The one of the most important factors we shoud consider in designing the processes using porous media such as activated carbon adsorber is the prediction of the breakthrough curve. In this study, the breakthrough curve of BAC process for the treatment of refractory pollutants was evaluated by simplified engineering analysis. Through the experiments, the slope of the breakthrough curve can be determined by retardation factor, R and apparent dispersion coefficient, $D_{app}$ which is determined by hydrodynamic dispersion, mass transfer effects and isotherm. Estimated concentration of effluent was agreed with the experimental values. Also, it is possible to use this method for predicting the breakthrough curve of the pollutants removal and tranport of pollutants in porous media.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.292-298
• /
• 2008

This study was experimentally investigated to understand the ice making characteristics of ice on a coil type ice maker. The experiment was carried out under the following conditions which are the brine temperatures of $-10[^{\circ}C],\;-8[^{\circ}C],\;-6[^{\circ}C]$, brine flow velocities of 1.0[m/s], 1.4[m/s], 1.8[m/s] and initial water temperatures of $6[^{\circ}C],\;9[^{\circ}C],\;12[^{\circ}C]$, ect. The acquired conclusions shows: 1) Ice making amount is increased with decreasing in the temperature of brine. 2) Total ice making amount shows higher value in larger size coil. However, the ice making amount per heat transfer area is increased in smaller one. 3) The ice making amount is increased with decreasing in the initial water temperature. 4) It is cleared that the overturn of natural convection existed in this experimental result.

• 한국미생물·생명공학회지
• /
• 제17권5호
• /
• pp.475-480
• /
• 1989

Pseudomonas delafieldii이 배양액으로부터 분리한 다당류 용액의 물성을 검토하였다. 본 다당류는 매우 점도가 높은 의가소성 물질로 1% 용액의 겉보기 점도는 42sec$^{-1}$에서 1769mpaㆍs이었다. 이 용액은 pH에 대한 안정성은 있으나 열 안정성은 보이지 않았다. 이 용액의 유동 활성에너지는 4.44kacl/mole 이고, 농도의존성은 double 1logarithm으로 포현되었다.

• 한국재료학회지
• /
• 제8권1호
• /
• pp.23-26
• /
• 1998

알루미나와 하소된 귤껍질의 소결반응에 의해 A $I_{2}$ $O_{3}$-CaO내화물이 제조되었다. 치밀화과정에서의 CaO의 영향과 A $I_{2}$ $O_{3}$-CaO 소결체의 특성을 고찰하였다. 소결체의 미세구조와 EDS 결과로 A $I_{2}$ $O_{3}$-CaO화합물을 확인하였다. 145$0^{\circ}C$에서 열처리한 소결체는 2.87/㎤의 부피비중과 12.03%의 겉보기 기공율을 가지며 압축강도는 312kg/$\textrm{cm}^2$이였다. 140$0^{\circ}C$에서 서결체의 열팽창 계수는 6.55Kx10$_{-6}$ $K_{-1}$이였다.