• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.356-363
• /
• 2003

An eddy current testing system was developed for detection of flaws in the ferromagnetic steel tubes. Because the eddy current signals from the ferromagnetic steel tubes could be distorted easily due to an irregularity of magnetic permeability, magnetic saturation is required to suppress this variation of magnetic fields. A magnetic saturation probe with the Hemholtz coil was designed for the inspection of the steel tubes. The bandwidth pass filters were adapted to minimize the noise from the DC magnetization. When using the designed test probe, the flaw signals could be discriminated from the noise. The system was tested at the production line and showed a capability of detecting flaws, like a drilled hole of the diameter of 2.0mm at the moving speed of 1m/sec.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.73-84
• /
• 2011

This study represents construction progress management model based on quality inspection process in addition to cost-schedule integration. Quality inspection process cycle, resource estimate as progress measurement parameter, hierarchical structure of schedule, and inspection lots linking quality inspection to resource estimate are addressed as four main information areas. The authors established several process models to give a structure and correlations among information elements on each of these areas. Applying the process models proposed, an information system was implemented and utilized for nuclear power plant construction. It reveals that the system achieves accurate and objective progress information in near real time with significantly reduced time and effort as well as administrative efficiencies from making quality inspection process online.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.269-276
• /
• 2001

Ultrasonic testing of composite materials is much more difficult than that of isotropic materials, because of the beam skew phenomenon caused by their elastic anisotropy. An established analytical method exists for elastic wave propagation in anisotropic media as a result of previous research efforts. Yet, due to the complexity of the analytical method, solution of real problems must resort to the numerical method. In this work, analytical solutions have first been obtained for the wavefield due to a point source in a unidirectional fiber-reinforced composite, which may be modeled as transversely isotropic. Then, the corresponding numerical solutions have been obtained using the mass-spring lattice model(MSLM). The two solutions have agreed well with each other. Other problems such as reflection from free boundaries and scattering from cracks have also been solved numerically, and the results have been investigated from the viewpoint of wave mechanics. The numerical model whose validity has been confirmed by this work will be of great use in simulating ultrasonic testing of composite materials.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.561-564
• /
• 2001

The cladding area of HANARO Research Reactor fuel rods should be checked not to have any defects larger than the size required at QA documents by using eddy torrent testing method doting fabrication process. To apply eddy current testing inspection to the fuel rods, encircling differential probes and standard specimen were designed and fabricated. The impedance of the fabricated probes was measured with impedance analyzer in order to cheek that the probe has a suitable impedance for the inspection frequency, and with this probe and MIZ-40A eddy current equipment, the detectability of this probes was investigated. The developed probes could detect artificial notch with 2mm length 10% depth of cladding thickness in cladding area. In addition, the probe was successfully applied to detect the defects in cladding area doting fabrication of the research reactor rods.

• Biomedical Science Letters
• /
• v.3 no.2
• /
• pp.161-168
• /
• 1997

The measurement of many biochemical changes that could be appeared as aging will be resulted in the very useful and basal marker to maintain healthy life and to predict the health condition and the retardation of the aging. We classified the geriatrics into the normal and same aged dementia on the based of clinical diagnostic as well as MMSE evaluation. And then we were collected blood samples from both groups and examined 13 biochemical assays to screen any valuable biochemical index for dementia. Among 13 assays, several assay data showed the statistically significant differences between two groups. The values of serum albumin, APase, and GOT were significantly decreased in demented group compared to control. On the other hand, the values of glucose and LDH were increased in dementia compared to control. Additionally, the value of Pi was increased but the values of calcium and GPT were decreased, without significant difference (p＞0.05). The values of other assays such as bilirubin, BUN, cholesterol, creatinine and total protein did not show any statistically significant differences. Conclusively it may be suggested that dementia might be resulted in the variable biochemical changes which could be affected by many environmental factors as well as dementia itself.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.426-432
• /
• 1999

A plus-point eddy current test(ECT) probe was developed to examine the defects on the welds of pumps, valves, and pipings which are the major components of the electric power plants, non-destructive evaluation (NDE) techniques for detecting and sizing the flaws were studied adapting this probe. Differential plus-point ECT probe is consists of two "I"-type coils crossed each other and has an advantage having a small influence on the sensitivity by lift-off variation to the conventional types of probe. The specimens with crack-like electro discharge machining(EDM) notches on the weld of type 304 stainless-steel were fabricated in order to evaluate the plus-point ECT probe response to the flaws. NDE techniques to detect and size the flaws and estimate the flaw type were established with this specimens.

• Journal of The Korean Association For Science Education
• /
• v.18 no.4
• /
• pp.617-626
• /
• 1998

Inquiry approach in teaching science has been widespread in Korea since the Third National Curriculum in 1970's. But the effect of the approach has never been evaluated systematically in Korea, so the science educators do not know if the inquiry approach really works and if any critical problems inhibit the effect of the approach. In this context, the NAEP of the Unied States and the APU of the United Kingdom were model programs for assessing the effect of the inquiry approach in teaching science. The purpose of this study is to develop an assessment system for evaluating the effect of inquiry teaching in elementary and secandary schools. For this purpose, an assessment framework and 240 test items were developed and tried with a sample of 8,906 students. The results say that the developed tests are reliable. The average Cronbach $\alpha$ reliability coefficient of the tests was 0.69. The discrimination index(point-biserial correlation coefficient) ranged from 0.39 to 0.54 with a mean of 0.49, which indiate they are excellent in discriminating students in terms of their inquiry achievement. The test items were also analyzed by "item response theory." The results also say that the items are successfully developed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.137-138
• /
• 2012

본 연구에서는 가스터빈 압축기 로터용 제작 관통볼트의 건전성 검사가 수행됐다. 육안검사, 치수, 재질, 경도 및 피닝처리 등을 검사했으며 GE 볼트와 비교해 건전성을 판단하였다. 평가 결과 제작볼트는 기준범위 이하의 피닝강도로 처리되었다. 이에 숏피닝 강도를 향상시켜 다시 제작된 수정볼트를 재검사했고 모든 항목에서 기준범위에 포함됨을 확인했다. 궁극적으로 본 연구에서 수행된 가스터빈 압축기 로터용 관통볼트의 건전성 검사가 유효함을 확인하였다.

• Journal of Embryo Transfer
• /
• v.6 no.1
• /
• pp.41-45
• /
• 1991

소와 견에 있어서 Unopette가 정자의 형태학적 검사 및 정자농도의 검사를 위하여 사용될 수 있는가를 알아 보기 위하여본 연구를 수행하였다. 소정액 및 견정액을 Unopette에 희석한 후 3-5$^{\circ}C$에 보존하면서 시간경과에 따라서 위상차현미경하에서 관찰하여 다음과 같은 결과를 얻었다. 1. Unopette를 사용하여 관찰한 정자는 48시간까지는 hematoxylin-eosin을 사용하여 정자보다는 높은 정상정자율을 나타내넜다. 2. Unopette를 사용한 정자는 정자농도에 있어서 대조군 정자에 비하여 24시간까지는 큰 차이를 나타내지 않았다. 3. 따라서 Unopette는 정자의 형태학적 검사 및 정자농도의 검사를 위하여 유용하게 사용될 수 있다는 사실을 알 수 있었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.391-394
• /
• 2011

기존 자바 가상 머신의 성능을 향상시키는 대표적인 기법들로 Just-in-time compiler와 Ahead-oftime compiler가 있다. 그리고 이러한 기법들은 전통적인 최적화 외에도 자바에 특화된 최적화 기법을 적용하여 효율적인 코드를 생성한다. 자바에 특화된 최적화 기법으로 대표적으로 널 포인터 검사 제거 기법이 있으며 이는 오래 전부터 자바 가상 머신에서는 필수적인 최적화로 여겨지며 그 성능 향상 또한 충분하다고 여겨졌다. 본 논문에서는 specialization기법을 도입하여 기존의 널 포인터 검사 기법을 확장하여 추가적으로 널 포인터 검사를 제거하는 기법을 제안하려고 한다. 그리고 이 기법은 기존의 널 포인터 검사 기법 자체를 수정하지 않아도 되며 Just-in-time compiler와 Ahead-of-time compiler에 모두 적용 가능하다. 실험 결과 메소드 호출이 많은 어플리케이션에서는 성능을 향상시킬 수 있었으며 일반적인 연산이 많은 어플리케이션에서도 일부 성능 향상을 얻을 수 있었다.