• The Journal of the Korea Contents Association
• /
• v.9 no.5
• /
• pp.174-181
• /
• 2009

Recently hospitals are implementing a One Stop Service as part of patient-care service. With the One Stop Service, medical treatment including consultation, inspection, and results are changing to be made available in one visit. Therefore most examinations are reserved for the same day; however, there are cases in which additional visits are necessary because of certain properties related to exams. This study compares and analyzes the number of reinspections before and after reforms. By designating the order of priority for BMD examinations and implementing education from information obtained in the OCS E-manual update, the number of reinspections for wards was reduced from 58 to 21, Outpatient departments were reduced from 51 to 12, and errors in reservations made by employees in the department of radiology were reduced from 98 to 11. Reinspections can be reduced with full understanding the factors related to reinspection and a background check prior to inspection in order to determine the order of priority for inspections. This will also reduce workers' stress and increase their efficiency and at the same time decease patient dissatisfaction and improve hospital reliability.

• Korean Journal of Cognitive Science
• /
• v.30 no.3
• /
• pp.133-156
• /
• 2019

To investigate how personality test items are understood by participants, their semantic representations were explored by Latent Semantic Analysis, In this thesis, Semantic Similarity Matrix was proposed, which contains cosine similarity of semantic representations between test items and personality traits. The matrix was compared to traditional factor loading matrix. In preliminary study, semantic space was constructed from the passages describing the five traits, collected from 154 undergraduate participants. In study 1, positive correlation was observed between the factor loading matrix of Korean shorten BFI and its semantic similarity matrix. In study 2, short personality test was constructed from semantic similarity matrix, and observed that its factor loading matrix was positively correlated with the semantic similarity matrix as well. In conclusion, the results implies that the factor structure of personality test can be inferred from semantic similarity between the items and factors.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.1
• /
• pp.42-48
• /
• 2024

With a sustained increase in the number of reported registrations for two-wheeled vehicles and the simultaneous growth of the domestic two-wheeled vehicle market, fueled by the activation of contactless industries and a rising population engaging in recreational two-wheeled vehicles during the COVID-19 era, concerns regarding safety incidents and environmental issues have come to the forefront. While the regular inspection methods and environmental standards for four-wheeled vehicles are becoming more stringent for safety and environmental management, the same cannot be said for two-wheeled vehicles. As the market for two-wheeled vehicles continues to expand, there is a pressing need for improvements in the management and inspection of these vehicles. In this study, we analyze cases of non-compliance from the results of periodic inspections over the past five years, specifically focusing on illegal customizations, exhaust emissions testing, and exhaust noise results. Through this analysis, we elucidate the necessity for enhancing the inspection system for two-wheeled vehicles, drawing parallels with the inspection systems applied to conventional automobiles. The findings of this research contribute to advocating for improvements in the inspection regime for two-wheeled vehicles, addressing the growing concerns related to safety and environmental impact.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.10
• /
• pp.149-156
• /
• 2024

This paper implemented a drill bit foreign matter inspection system based on the YOLO V3 algorithm and evaluated its performance. The study trained the YOLO V3 model using 600 training data to distinguish between the normal and foreign matter states of the drill bit. The implemented inspection system accurately analyzed the state of the drill bit and effectively detected defects through automatic inspection. The performance evaluation was performed on drill bits used more than 2,000 times, and achieved a recognition rate of 98% for determining whether resharpening was possible. The goal of foreign matter removal in the cleaning process was evaluated as 99.6%, and the automatic inspection system could inspect more than 500 drill bits per hour, which was about 4.3 times faster than the existing manual inspection method and recorded a high accuracy of 99%. These results show that the automated inspection system can dramatically improve inspection speed and accuracy, and can contribute to quality improvement and cost reduction in manufacturing sites. In future studies, it is necessary to develop more efficient and reliable inspection technology through system optimization and performance improvement.

• 월간산업보건
• /
• s.179
• /
• pp.4-15
• /
• 2003

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.231-238
• /
• 2006

Nondestructive examination for low pressure turbine disc in standard nuclear power plant using phased array technique was studied. For this purpose, disc mockups were made and notches were machined in the mockups. Detection and length sizing by different methods are compared. Depth of deep notches could be measured by using AATT(absolute arrival time technique) or RATT(relative arrival time technique) but shallow notches that must be detected in early stage couldn't be measured by these two methods. For this case, notch depth was estimated by using signal response angle range and preyed usefulness.

• 건강소식
• /
• v.36 no.5
• /
• pp.20-22
• /
• 2012

중소기업에 다니는 40대 중반의 남성은 얼마 전부터 종종 가슴이 화끈거리는 불쾌한 통증과 함께, 목과 가슴 사이에 복숭아씨가 걸려있는 듯한 답답함을 느꼈다. 혹시나 심장에 이상이 있는 것이 아닌지 검사를 해보았지만, 결과는 정상이었다. 이리저리 알아보다 위액이 역류하는 경우에도 비슷한 증상이 있을 수 있다는 정보를 얻고 소화기내과를 찾았고, 내시경 검사 결과 역류성 식도염 진단을 받았다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.4
• /
• pp.273-280
• /
• 2016

The simulation of nondestructive testing has been used in the prediction of the signal characteristics of various defects and in the development of the procedures. CIVA, a simulation tool dedicated to nondestructive testing, has good accuracy and speed, and provides a three-dimensional graphical user interface for improved visualization and familiar data displays consistent with an NDE technique. Even though internal validations have been performed by the CIVA software development specialists, an independent validation study is necessary for the assessment of the accuracy of the software prior to practical use. In this study, time of flight diffraction signals of ultrasonic inspection of a calibration block for reactor vessel head penetrations were simulated using CIVA. The results were compared to the experimentally inspected signals. The accuracy of the simulated signals and the possible range for simulation were verified. It was found that, there is a good agreement between the CIVA simulated and experimental results in the A-scan signal, B-scan image, and measurement of depth.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.239-245
• /
• 2006

Ultrasonic inspection method is more profitable than X-ray radiographic inspection in cost and effect of defect detection such as dis-bond, damage, and it does'nt need special constructions and can be possible real time inspection with safety. This report explains the experiment and analysis of ultrasonic property of solid propellant and the inspection methods of propellant/liner dis-bond by inside or outside inspection, and of propellnat micro crack by damage. At result, ultrasonics has big attenuation$(6\sim8db/cm)$ in solid propellant, and it. can be possiblle to detect the defect of propellant/liner dis-bond by inside or outside inspection. And also it can be possible to detect the propellant micro crack caused by damage by using ultrasonic attenuation.

• Journal of Gifted/Talented Education
• /
• v.12 no.4
• /
• pp.26-44
• /
• 2002

We have developed a tool and solution to test creativity level for science field. This test tool was considered 7 creativity elements. In development process, it was verified for contents validity, clarity of the item etc. The test developed in this study was analyzed item analysis after applying for 332 middle school students. As a results of item analysis, it showed meaningful(validity: 92%, item difficulty: $42%{\sim}73%$, reliability: 0.84, item discriminating power: $0.22{\sim}0.70$)over the level of a standard basis. This means that the test tool was useful in the test process of creativity level for science.