• Clinics in Shoulder and Elbow
• /
• v.16 no.1
• /
• pp.47-52
• /
• 2013

Lesions of the long head biceps tendon pulley are frequent causes of shoulder dysfunction and pain. These lesions cause instability of the long head of the biceps tendon (LHB), and intra-articular tear of the subscapularis and the supraspinatus tendon might result from them. The arthroscopic repair of these lesions has not gained widespread acceptance as an effective procedure. Predictable results can be obtained by treating these lesions more definitively with tenotomy or tenodesis. The purpose of this article is to review the anatomy and properties of the LHB pulley and to provide treatment strategies for alleviating pulley lesions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.169-189
• /
• 2024

In the current work, a series of three-dimensional finite element analyses have been carried out to understand the behaviour of pre-existing single piles and pile groups to adjacent Shield TBM tunnelling by considering various reinforcement conditions. The numerical modelling has analysed the effect of the pile cutting, ground reinforcement and pile cap reinforcement. The analyses concentrate on the ground settlements, the pile head settlements, the axial pile forces and the shear stress transfer mechanism at the pile-soil interface. In all cases of the pile tips supported by weathered rock, the distributions of shear stresses presented a similar trend. Also, when the pile tips were cut, tensile forces or compressive forces were induced on the piles depending on the relative positions of the piles. Furthermore, when the pile tips are supported by weathered rock, approximately 70% of the load is supported by surface friction, and only the remaining 30% is supported by the pile tip. Furthermore the final settlement of the piles without reinforcement showed approximately 70% more settlement than the piles for which ground reinforcement is considered. It has been found that the ground settlements and the pile settlements are heavily affected by the pile cutting and reinforcement conditions. The behaviour of the single pile and group piles, depending on the pile cutting, conditions of ground and pile cap reinforcement, has been extensively examined and analysed by considering the key features in great details.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.317-322
• /
• 2002

We have studied the sawing sach as the round brilliant cut, cushion barion cut and marquise cut. Through this study, we could examined the rate of waste from the grinding work, and find a solution for many problems which could be derived from the grinding work. We could reduce the rate of waste by this study about sawing technique; 2.5 % for round brilliant cut, 2.5 % for cushion barion cut and 5.5 % for marquise cut.

• Korean Journal of Food Science and Technology
• /
• v.49 no.6
• /
• pp.599-604
• /
• 2017

The purpose of this study was to explore methods for efficient management of the quality and safety of simple processed agricultural products in Busan. We tested 258 samples of simple processed agricultural products for distribution of aerobic bacteria and coliforms, and identified food-borne pathogens. The average aerobic bacterial and coliforms counts were 7.1 and 4.1 log CFU/g in simple processed vegetables, 6.8 and 3.5 log CFU/g in dried vegetables, and 6.2 and 2.9 log CFU/g in simple processed fruits. Additionally Staphylococcus aureus, Salmonella spp., Campylobacter jejuni/coli and Listeria monocytogenes were not detected in any samples. However, Bacillus cereus, Clostridium perfringens and E. coli were detected in 41 samples (16.3%), 2 samples (0.8%), and 4 samples (1.6%), respectively. This analysis revealed that none of C. perfringens and E. coli isolates harbored pathogenic toxic genes. However, all of B. cereus isolates carried at least 1 toxin gene.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.65-65
• /
• 2012

The air texturing공정은 노즐에서 전달되는 초음속 에어기류에 의해 overfeed를 수반하여 yarn속 fiber가 뒤얽혀 loop와 crimp를 발달시키는데, 고강력 고탄성율 고내열성 내절단성 등의 특성을 가지는 아라미드섬유를 에어 가공사로 가공 할 경우 가공 전 필라멘트 상태일 때 보다 표면에 생기는 loop로 인하여 촉감이 좋아지고 또한 타 소재와 접착 시 접착제 담지 성능이 향상 되어 접착력이 상승되고, 이를 통해 보강재로서의 기능이 강화되는 반면 역학물성이 기존의 아라미드 보다 저하되는 약점을 가지고 있어 최근 ATY 공정조건이 ATY 사의 구조와 물성변화에 미치는 영향에 대한 많은 연구결과가 발표되고 있다. 본 연구에서는 Aiki air jet texturing machine에서 $Heracron^{(R)}$ para-aramid(840, 1000d, 1500d)를 사용하여 ATY nozzle의 직경을 0.6, 0.75, 1, 1.2mm로 변화를 주어 12개의 para-aramid ATY 시료를 제조하여 이들의 섬도, 강신도, 초기탄성률, 열수축률 그리고 형태불안정성(instability)등의 물성변화를 분석하여 다음과 같은 결과를 얻었다. 노즐의 직경이 증가함에 따라 사 내의 filament간의 움직임이 자유로워 교락이 증가하고 루프가 형성되어 단위길이 당 mass가 커지므로 섬도가 미세하게 증가하는 것을 볼 수 있다. 또한 직경이 증가할수록 절단강도와 초기탄성률은 감소하고 절단신도가 증가하는 경향을 볼 수 있는데 이는 축 방향으로의 배열이 적어져 하중을 분담하는 portion이 감소하고 사의 loop형성이 많아짐으로서 상대적으로 인장력에 대응하는 fiber의 수가 적어지기 때문으로 사료된다. 이는 현미경 관찰로 확인할 수 있는데 직경이 증가함에 따라 사의 loop의 엉킴이 증가하고 filament가 조밀한 것을 확인할 수 있다. 직경 변화에 따른 건 습열 수축률은 1% 미만의 매우 낮은 값으로 영향을 받지 않는 것을 확인 할 수 있는데 para-aramid의 열적특성의 안정성에 기인하는 것으로 사료되며 ATY의 불안정성은 노즐 직경 증가에 따른 어떤 경향성을 찾아볼 수 없었지만 840d, 1000d, 1500d로 섬도가 증가함에 따라 사의 불안정성이 증가하였다.

• Journal of the Korean Arthroscopy Society
• /
• v.17 no.1
• /
• pp.24-30
• /
• 2013

Purpose: To evaluate the outcome of arthroscopic posterior cruciate ligament (PCL) augmentation using an autogenous hamstring tendon graft and the posterior-posterior triangulation technique with preservation of ligament remnant or elongated ligament. Materials and Methods: From January 2002 to December 2009, we performed PCL augmentation using an autogenous hamstring tendon graft and the posterior-posterior triangulation technique in 32 patients. The mean age was 35.2 years. Twenty two cases were male and 10 cases were female. Average follow-up period was 5 years and 5 months (range: 2-7.9). Subjective and objective parameters were utilized in analyses, such as the mean range of motion, post. drawer test, Lysholm knee score, Tegner activity score, International Knee Documentation Cominittee (IKDC) grade, and second look arthroscopic examination. Results: At last follow up posterior displacement by the Telos stress test decreased from $10.8{\pm}5.1\;mm$ to $2.8{\pm}3.7\;mm$ (p<0.05). The final Lysholm knee score improved from $60.4{\pm}5.8$ to $84.6{\pm}4.8$. Tegner activity score improved from 3.2 to 4.8. The final IKDC grade was A in 18, B in 11, C in 3. Postoperative Lysholm knee score, IKDC grades, Tegner activity scale, and posterior displacement demonstrated statistically significant improvement compared to the preoperative state (p<0.05). Conclusion: Arthroscopic PCL reconstruction using an autogenous hamstring tendon with preservation of ligament remnant showed a good clinical results and posterior stability.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.50-62
• /
• 2014

The number of traffic accidents has been decreased since 2000; however, the downward trend of crash occurrence has been slower after 2006. A few decades ago, physical improvement projects such as alignment improvement and the installation of safety facilities were usually implemented to decrease the occurrence of traffic accidents, but the effects of physical improvement on safety have been gradually decreased. The main objective of this study is to identify how the drivers' characteristics affect and/or are related to traffic accidents. Most of previous works have focused on revealing the difference of the nature of the drivers between the drivers who have no experience and the drivers with experience of traffic accidents. This study tries to analyze the habitual accidents proneness through a survey of drivers' personalities for drivers who were involved in traffic accidents at least once. As a result, nine personality factors were found to be statistically significant: Neuroticism(N), Lie(L), Psychoticism* Neuroticism(PN), Psychoticism*Lie(PL), Extraversion*Lie(EL), Neuroticism*Lie(NL), Impulsiveness(IMP), Venturesomeness(VEN), Empathy(EMP). Among these factors, single character factors were found to increase accidents, whereas complex factors were found to decrease the occurrence of accidents.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.2
• /
• pp.101-104
• /
• 1990

The bacteria isolated from mulberry trees which had shoot soft rot symptoms occurred after intermediate cutting during autumn rearing season were indentified. External morphology of the bacteria showed rod shape with peritrichous flagella, and were facultative anaerobes in oxygen requirement test. The baacteria easily putrefied the slices of potato and carrot when they were placed on to the center of sliced surfaces, and the bacteria, also, iniciated rapid development of soft rot symptoms on mulberry leaves in pathogenesity test. The results of morphological, physiological and pathological tests on the bacteria suggested that the isolate could be a strain of Erwinia carotovora subsp. carotovora.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.64-64
• /
• 2012

아라미드는 일반적인 유기섬유와는 다른 우수한 역학적 성질을 바탕으로 보호의류 중에서 방탄방호 및 방검보호 의류에 사용되는 고부가 소재이다. 현재까지 ATY기계에서 사의 구조와 물성에 큰 영향을 미치는 Nozzle의 구조에 대한 연구결과는 많이 발표되어왔다. 그러나 최근 들어 소방방화방 검용 보호의류에 많이 사용되는 아라미드사에 ATY 공정 중에서 Nozzle의 직경이 ATY사의 물성에 어떤 영향을 미치는가에 대한 연구는 발표된 바가 없다. 따라서 본 연구에서는 Para-aramid/Nylon hybrid사를 이용하여 ATY로 제조할 경우, 표면에 생기는 loop로 인하여 타 소재와 접착시, 접착제 담지 성능이 향상되어 접착력이 상승되는 반면 아라미드 Hybrid사의 역학물성은 ATY가 가공되기 전의 물성보다 저하되는 약점을 가지고 있다. 따라서 본 연구에서는 ATY 제조공정에서 Nozzle의 직경을 달리할 때 Aramid/Nylon Hybrid ATY사의 물성변화를 분석함으로서 방화복과 방검용 보호의류에 적합한 아라미드 ATY사를 개발하고자 한다. 본 연구에서는 ATY 제조공정 중 다른 공정조건은 동일하게 하고 Nozzle의 직경을 0.6, 0.75, 1, 1.2mm로 변경하여 4가지 시료를 준비하고 물성분석을 위하여 제조된 시료의 강신도, 초기탄성률을 각각 측정하여 인장특성을 확인하였으며, 건열수축률과 습열수축률을 측정하여 시료의 열 수축률을 측정 분석하였다. 표면의 루프 발현 정도를 보기위하여 형태 불안정성을 측정 평가하였으며 영상현미경시스템을 사용하여 표면특성을 측정 평가하여 다음과 같은 결론을 얻었다. Nozzle의 직경이 증가함에 따라 절단강도는 30% 감소하였고 초기탄성률은 3배 가까이 감소하였다. 그리고 절단신도는 2배정도 증가하는 경향을 나타내었다. 또한 Nozzle의 직경이 증가함에 따라 ATY hybrid사의 건 습열수축률이 증가하다가 직경이 1.2mm일 때 감소하는 경향을 나타내었고 직경 변화에 따라 4~6%의 열 수축률의 분포를 보였다. Para-aramid/Nylon hybrid사의 형태불안정성은 0.3~0.5%를 분포를 나타내었고 Nozzle의 직경이 0.6, 1mm일 때 상대적으로 낮은 ATY의 불안정성이 확인되었다. Nozzle의 직경이 감소할수록 loop의 엉킴이 적으며 flat하였으며 직경이 1.2mm일 때 가장 조밀하고 표면에 loop가 많이 형성된 것을 확인하였다.

• Parasites, Hosts and Diseases
• /
• v.34 no.2
• /
• pp.127-134
• /
• 1996

Twelve isolates of Accnthamoebc app. assigned to either A. castellanii or A. poIMphoSa, and type strains of A. culbefsoni, A. henIWi, A. pqkestinefiE, and A. astronyxi,s were examined by restriction fragment length polymorphism (RFLP) of a conserved region of small subunit ribosomal RMh gene (ssu rDNA) amplified by polymerase chain reaction (PCR). The PCR products of the isolates measured approximately 910-930 bp, except for that of A. astronyxis which was extraordinarily long, approximately 1,170 bp. Average of estimated sequence divergence of the amplified DNA among the isolates assigned to A. castellanii was 9.8% whereas that among the isolates assigned to A. polvphusn 9.6%. The maximum intraspecific sequence divergence among the isolates assigned to A. costellanii was observed between the Chang and Ma strains (17.3%) while that among the isolates assigned to A. poIWphosa was observed between KA/S3 and KA/S7 strains (16.1%). The both maximum sequence divergences were much greater than the minimum interspecific sequence divergence between A. cnstellnnii and A. polwphasa (2.6%) which appeared between the Castellani (or CCAP 1501/12 g) and KA/S3 strains. The PCR-RFLP patterns of A. culbertsoni, A. healyi, A. palestinensis, and A. ostronvxis were quite diverse from one another and from those of isolates assigned to either A. castellanii or A. polyphoga. It is suggested that taxonomic validity of the isolates assigned to either A. castellnnii or A. polyphoga should be reevaluated.