• Title/Summary/Keyword: 건축 자재 재사용

Search Result 61, Processing Time 0.029 seconds

A Study on how to improve Survey of Fire Safety Management of manufacturing plants (The Medium and Small-sized Manufacturing industry) (제조 사업장의 소방안전관리 실태조사 및 개선방안에 대한 연구 (중소규모 제조사업장 중심으로))

  • Choe, Yeong-Gi;Kim, Byeong-Seok
    • Proceedings of the Safety Management and Science Conference
    • /
    • 2013.11a
    • /
    • pp.483-497
    • /
    • 2013
  • 현대사회가 발전 할수록 대량산업화와 도시화가 심화되어 건축물의 초고층화 및 대형화가 증가하고 있으며, 안전적인 건축물 보다는 건물 및 제조사업장의 시각적인 디자인에 치우쳐 화재하중이 높은 건축자재의 내 외장재 및 고급스러운 장식물을 사용함으로써 그 위험뿐 만 아니라 화재발생시 대규모 인명 및 재산상의 피해를 가져오게 된다. 그리고 제조사업장화재는 화재로 인한 직접적인 손실 즉 물적 손실은 물론 생산중단으로 인한 간접적인 손실은 실로 측정하기가 어렵다. 지금까지 발생한 제조사업장화재의 발화요인별 분석은 부주의, 전기적, 미상 순으로 인한 화재가 가장 많고 발화열원은 작동기기, 담뱃불(라이터), 마찰 전도 복사등이 주요 원인이 되고 있고 대형화제 취약시설로는 공장 및 창고로 나타나고 있다. 소방방재청의 통계자료를 살펴보면 2012년 화재 발생현황 중 발화요인에 대한 화재별 장소 건수를 검토 한 결과 비주거의 화재발생 16,009건 중 5,758건으로 (36%)부주의이고, 주거에도 화재발생 10,715건 중 5,560건으로 51.9%의 부주의로 가장 높은 것으로 나타났다. 그러므로 제조사업장의 사소한 부주의로 발생하는 화재를 예방하기 위해서는 소방안전관리자의 처우개선과 기업활동규제완화의 겸직 허용을 재검토 하여야 하며, 소방안전관라자의 실무능력 강화를 위한 소방안전관리 실무교육과정을 이론적 교육 보다는 현장 실습위주로 할 필요가 있다. 이를 위해서는 소방안전관리자에 대한 법정 실무교육 횟수를 확대하여 현행 2년에 1회 에서 1년에 1회로 하고, 실무교육에 있어서도 우수송방안전관리 업체를 선정하여 화재예방에 대한 구체적인 업무를 활성화 하고, 문제 발생요소들을 분석하여 실습을 통한 소방안전관리자의 실무교육을 실시해야 할 것이다. 이러한 전문 소방안전관리자로 소방대상물의 소방교육 및 훈련을 성실히 수행 해야 할 것 이다. 한순간의 부주의로 인하여 화재가 발생하면 돌이킬 수 없는 수백명의 생명을 앗아가고, 수백억원대의 재산피해를 줄이기 위해서는 소방안전관리자의 역량을 넓히고 화재예방 업무를 최우선적으로 수행해야 할 것이다. 화재예방을 위해 소방안전관리자의 업무개선 및 전문교육을 활성화 하여 업무능력을 향상 시켜 화재발생시 초기진압에 신속하고 정확하게 대처해야 한다는 것이 전문적인 화재예방 대책 일 것이다.

  • PDF

The Characteristics of Mortar According to the Water Cement Ratio and Mudflats Replacement Ratio (물-시멘트비 및 갯벌 치환율에 따른 모르타르의 특성)

  • Yang, Seong-Hwan;Lee, Heung-Yeol
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.3
    • /
    • pp.227-234
    • /
    • 2017
  • This research analyzes the properties of mortar following the rise in water-cement ratio and applicability as an eco-friendly construction supply by using the mudflats of a dredged arena as a substitute for aggregate. The results of a experiment of the flow showed that the flow value decreases as the amount of mudflats increases. A test for chloride content showed that the chloride content increases with the amount of mudflats. In the compression of specimen mixed with mudflat and the testing of tensile strength, the strength weakened as the addition ratio of mudflats rose. However, with 14-day strength as the standard, most specimen showed more strength than the plain, and 14-day strength was higher than 28-day strength. It appears to be experimental error in the mixing process from the viscosity and cohesion of mudflats, and it is considered that there will be a need for an experiment on mixing methods of mudflats in the future. The compressive strength of this research was the strongest with 70% in water-cement ratio, and the tensile strength was strongest with 80% in water-cement ratio. In the evaluation of surface analysis, 70% water-cement ratio, which is finest in strength, mixing, and compactness, was selected to analyze the roughness of the surface, and the results showed that the surface became smoother as the addition ratio of mudflats increases. In conclusion, it appears that 70% water-cement ratio is the optimal mixing ratio for mortar and 10 to 30% addition ratio of mudflats the optimal ratio. It also appears that the application of interior finishing material like bricks and tiles and interior plastering material using the mudflats are possible.

Analysis of Construction Policy System for Quality Assurance of Construction Used Steels (건설용 강재의 품질확보를 위한 건설제도 분석 연구)

  • Yoon, Jongsik;Yu, Ilhan;Kim, Kyungrai;Jung, Daewoon
    • Korean Journal of Construction Engineering and Management
    • /
    • v.20 no.1
    • /
    • pp.3-13
    • /
    • 2019
  • Recently, quality problems of steel used for construction have been raised as a cause of building collapse and safety accidents. Accordingly, it becomes more important to secure quality through material management, procurement management, and construction management for construction used steels. However, the quality management for construction used steels is confined to technical production and process control. So, it does not provide a solution of various non-conforming steel products issues. Therefore, this study suggests improvements of the construction system to secure quality of the construction used steels. Through expert interviews, we identify the items for system improvement and derive the top priority items by considering utility through a structured Analytic Hierarchy Process (AHP). It also divided the respondents into enterprise and research groups to analyze differences, implications and future improvement issues and suggest a road map. It is expected that the priority items derived in this study could be useful as a basic data for making policy decisions to assure the quality of construction used steel.

A Study on Tile from the Early Period of the Three Kingdoms Period Excavated in Bonghwang-dong (김해 봉황동 유적 일대 출토 삼국시대 초기 기와 검토)

  • YUN Sunkyung;KIM Jiyeon
    • Korean Journal of Heritage: History & Science
    • /
    • v.56 no.4
    • /
    • pp.40-52
    • /
    • 2023
  • The basic purpose of building material called tiles is waterproofing and damp proofing, and they were restricted to use on important buildings to symbolize authority. This is especially true during the Three Kingdoms period, although unearthed examples are rare. Most of these tiles are found in ruins in the Silla and Baekje regions. Tiles were excavated from the Buwon-dong ruins that show the oldest manufacturing technique in the Gaya region to date, and tiles from the early Three Kingdoms period were recently excavated from the Gimhae Bonghwang-dong ruins, which is presumed to be the site of the royal palace of Geumgwan Gaya. These are important materials that show the appearance of tiles from the early days of Gimhae, the ancient capital of Geumgwan Gaya. The tiles excavated from the Bonghwang-dong ruins are reddish-yellow because a small amount of sand was mixed in the tile material and baked at a low temperature. The tiles are thin, no traces of fabric were identified, but traces of clay bands were identified. Tapping tool marks and traces of an anvil used in pottery production are clearly observed on the inside and outside, indicating that the tiles were made in the same way as earthenware manufacturing methods. If this is connected to the genealogy of the potters who made Gaya earthenware, it is estimated that tiles and earthenware were produced together as in the Songrim-ri ruins in Bulo-dong, Incheon, Songgok-dong ruins in Gyeongju, and Mulcheon-ri ruins. To date, tiles excavated from the Gimhae area have been identified only in places believed to be the Geumgwan Gaya City Wall (Royal Palace) in the Gimhae Basin. Considering what has been recorded so far and the geographical scenery, the Bonghwang-dong remains are the only city wall candidate site, and this is clearly revealed through the existence of the excavated tiles, which proves this. Considering that a small number of tiles were excavated during this time, it is estimated that the role of tiles as a luxury product with a symbolic meaning was greater than that of roofing materials, and there were strict restrictions and controls on its use.

Fabrication of Electrospun PAN/FA Nanocomposites and Their Adsorption Effects for Reducing Volatile Organic Compounds (전기방사에 의한 PAN/FA 나노 복합재의 제조 및 휘발성 유기 화합물에 대한 흡착효과)

  • Ge, Jun Cong;Wang, Zi Jian;Yoon, Sam Ki;Choi, Nag Jung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.6
    • /
    • pp.702-708
    • /
    • 2018
  • Volatile organic compounds (VOCs), as a significant air pollutant, is generated mainly from the burning of fossil fuels, building materials using painting, etc. The inhalation of a certain amount of VOCs can be deleterious to human health, e.g., headaches, nausea and vomiting. In addition, it can also cause memory loss and even increase the rate of leukemia. Therefore, as one of the methods for reducing VOCs in air, polyacrylonitrile/fly ash (PAN/FA) composite nanofibrous membranes were fabricated by electrospinning. To observe their VOCs adsorption capacity, the morphological structure of PAN/FA nanofibrous mats was investigated by field emission scanning electron microscopy (FE-SEM), and the VOCs (chloroform, benzene, toluene, and xylene) adsorption capacity of PAN/FA membranes were tested by gas chromatography/mass spectrometry (GC/MS). The results indicated that the PAN nanofiber containing 40 wt. % FA powder had the smallest fiber diameter of 283 nm; they also showed the highest VOCs adsorption capacity compared to other composite membranes.

Experimental Study on the Stress Variation of Concrete Containing F-fiber Extracted from Waste FRP (폐 FRP로부터 분리한 F-섬유를 이용한 콘크리트 강도 특성 변화에 대한 실험적 연구)

  • Yoon, Koo Young;Park, Jong Won;Lee, Seung Hee
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.17 no.1
    • /
    • pp.42-45
    • /
    • 2014
  • Even though to discard the waste FRP (Fiber-Reinforced Plastic) is urgent and problematic, the way to do it has not been efficient. In our project team the FRP have been splitted into some layers which have different physical properties; mat and roving layers. Among those, the roving layer woven like a basket by bundles of glass fibers has been cut into reusable fibers called 'F-fiber'. F-fiber is 1 mm or 3 mm in width and 3 cm in length. It is used in fiber-reinforced concrete (FRC) with 0.5%, 0.7%, 1.0%, or 1.5% of volume ratio. Produced FRC was tested in compressive, tensile, and bending stress in contrast to the without-fiber (standard) concrete and 0.1% polypropylene reinforced concrete (PP-FRC). The tensile and bending stresses are more or less those of PP-FRC. The compressive stress, however, is similar (with 3 mm F-fiber) to or lower (with 1 mm F-fiber) than that of standard concrete. Conclusively the usage of the waste FRC in concrete is advised to be limited to the one where the compressive stress is not much critical.

Application of PCM Technology to Concrete II : Effects of SSMA(Sulfonated Styrene-Maleic Anhydride) on the Properties of the 1-Dodecanol Micro-Capsule (PCM 기술의 콘크리트 적용 II : 계면중합법에 의한 1-도데카놀 마이크로 캡슐에 있어서 계면활성제로 사용된 SSMA의 표면활성도가 마이크로 캡슐의 특성에 미치는 영향)

  • Shin, Se-Soon;Jung, Jae-Yun;Lim, Myung-Kwan;Choi, Dong-Uk;Kim, Young-Ho
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.1 no.1
    • /
    • pp.17-25
    • /
    • 2013
  • Thermal storage technology used for indoor heating and cooling to maintain a constant temperature for a long period of time has an advantage of raising energy use efficiency. This, the phase changing material, which utilizes heat storage properties of the substances, capsulizes substances that melt at a constant temperature. This is applied to construction materials to block or save energy due to heat storage and heat protection during the process in which substances melt or freeze according to the indoor or outdoor temperature. The micro-encapsulation method is used to create thermal storage from phase changing material. This method can be broadly classified in 3 ways: chemical method, physical and chemical method and physical and mechanical method. In the physical and chemical method, a wet process using the micro-encapsulation process utilized. This process emulsifies the core material in a solvent then coats the monomer polymer on the wall of the emulsion to harden it. In this process, a surfactant is utilized to enhance the performance of the emulsion of the core material and the coating of the wall monomer. The performance of the micro-encapsulation, especially the coating thickness of the wall material and the uniformity of the coating, is largely dependent on the characteristics of the surfactant. This research compares the performance of the micro-capsules and heat storage for product according to molecular mass and concentration of the surfactant, SSMA (sulfonated styrene-maleic anhydride), when it comes to micro-encapsulation through interfacial polymerization, in which Dodecan-1 is transformed to melamin resin, a heat storage material using phase changing properties. In addition, the thickness of the micro-encapsulation wall material and residual melamine were reduced by adjusting the concentration of melamin resin microcapsules.

Proposal for Safety Management of Formwork Construction Using IT Technology (IT 기술을 이용한 거푸집 동바리공사 안전관리 제안)

  • Jeon, Kyong-Deck;Shin, Seung-Jung
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.20 no.6
    • /
    • pp.93-99
    • /
    • 2020
  • In terms of construction work, the construction cost is lower than the importance of the construction, and since it is demolished after the completion of the construction, it is treated as a relatively small proportion compared to other construction types. Construction engineers who actually worked on the site talk about the safety of the construction work as the most important work of the various processes to ensure the quality and safety of the construction work. However, it is also true that safety management is difficult for temporary construction because various types of temporary materials are installed at various sites at the same time as construction progresses, and the main construction is carried out using them. Safety accidents in construction work are not much different even if they are carried out in temporary construction. The importance and safety of construction work cannot be neglected in view of the recent trend of large-scale construction, multi-purpose, excavation of large-scale underground spaces, and construction trends that are changing to skyscrapers. The purpose of this research is to secure the safety of Dongbar among the temporary materials used in construction work by using IT convergence technology, and to propose safety management to prevent safety accidents in the construction work.

A Study on the Detoxification of Chrysotile and the use of High-density Extruded Cement Panel Reinforcement Fibers (백석면의 무해 섬유화 처리 방법과 고밀도 압출성형 패널 활용 연구)

  • Jang, Kyong-Pil;Kim, Tae-Hyoung;Song, Tae-Hyeob
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.9 no.2
    • /
    • pp.223-228
    • /
    • 2021
  • The final disposal method for asbestos building materials is to be landfilled at a designated waste landfill in accordance with the Waste Management Act. However, it is difficult to secure a domestic designated waste landfill site to landfill the entire amount of asbestos waste, which is expected to emit more than 400,000 ton/year by 2044. In this study, a detoxification treatment was performed on a ceiling tex with a density of 1.0 to 1.2g/cm3 containing 3 to 7% of chrysotile, and it was used as a reinforcing fiber for extruded panels. It was confirmed that asbestos components were detoxified through the reaction process using 30% oxalic acid and carbon dioxide, and it was recognized that these detoxifying properties were maintained even after extrusion molding. However, it was found that milling to a fiber size of less than 1mm for complete detoxification of asbestos resulted in a decrease in reinforcing performance. Therefore, in the case of using detoxified asbestos fibers in the extrusion molding process, it is considered desirable to add fibers with a length of 5mm or more to improve the reinforcing performance.

Problems of Environmental Pollution (환경오염의 세계적인 경향)

  • 송인현
    • Proceedings of the KOR-BRONCHOESO Conference
    • /
    • 1972.03a
    • /
    • pp.3.4-5
    • /
    • 1972
  • 생활수준이 낮은 단계에 있어서는 우선 식량에 대한 수요가 강하다. 인간의 욕구가 만족스럽게 먹는다는 것에 대하여 제일 강하게 발동하는 것이다 그러나 점차 과학기술과 산업과 경제가 발전하여 성장과정에 오르게 되고 소득수준도 향상하게 되면 시장기구를 통해서 구입 할 수 있는 개인의 물적 소비재에 대해서는 점차 충족하게 되며 식량이외에도 의복, 전기기구 및 일용생활용품, 자동차 등에 이르기까지 더욱 고차원의 소비재가 보급하게 되는 것이다. 이렇게 되며는 사람의 욕구는 사적 재물이나 물적 수요에서 점진적으로 공공재나 또는 질적 수요(주택, 생활환경 등)의 방향으로 움직이게 되는 것으로써 여기에 환경오염 또는 공해문제에 대하여 의식하게 된다. 그러나 여기에서 더욱이 문제점이 되는 것은 소득 수준의 향상 과정이란 그 자체가 환경오염의 커다란 요인이라는 점이며 자동차의 급격한 보급과 생활의 편의성을 구하여 집중되는 도시인구의 집적, 높은 소득을 보장하기 위한 생산성 높은 중화학공업의 발전 등등은 그 자체가 환경권이란 사람이 요구하는 고차원의 권리를 침해하는 직접적인 요인이 된다는 것이다. 이와 같은 환경오염이나 공해문제에 대한 세계적인 논의는 이미 시작된 지 오래이지만 현재는 우리의 건강보호를 위해서나 생활환경의 보전을 위해서라는 점에서는 그치는 것이 아니고, 더욱 넓혀서 자연의 보호, 자원의 보호라는 견지로 확대되고 있다. 이와 같은 세계적인 확대된 이해와 이에 대한 대책강구의 제안은 1968년 국제연합의 경제사회이사회에서 스웨덴 정부대표에 의하여 제시되었으며 1969년의 우- 탄트 사무총장의 인간환경에 관한 보고서, 1970년 Nixon 미대통령의 연두일반교서 그리고 1972년 5월 6일 스웨덴의 스톡홀롬에서 개최되는 인간환경회의의 주제 등을 통해서 알 수 있고, 종래의 공해나 생활환경의 오염문제라는 좁은 개념에서가 아니고 인간환경전체의 문제로 다루고 있는 것이다. 즉 환경개발(도시, 산업, 지역개발에 수반된 문제), 환경오염(인위적 행위에 의하여 환경의 대인간조건이 악화하는 문제) 자연ㆍ자원의 보호관리(지하, 해양자원, 동식물, 풍경경치의 문제)란 3개 측면에서 다루고 있는 것이다. 환경오염이란 문제를 중 심하여 보면 환경을 구성하는 기본적인 요소로서 대기, 물, 토지 또는 지각. 그리고 공간의 사대요소로 집약하여 생각할 수 있음으로 이 4요소의 오염이 문제가 되는 것이다. 대기의 오염은 환경의 오염중 가장 널리 알려진, 또 가장 오랜 역사를 가진 오염의 문제로써 이에 속하는 오염인자는 분진, 매연, 유해가스(유황산화물, 불화수소, 염화수소, 질소산화물, 일산 화염소 등) 등 대기의 1차 오염과 1차 존재한 물질이 자외선의 작용으로 변화발생 하는 오존, PAN등 광화학물질이 형성되는 2차적인 오염을 들 수 있다. 기외 카도미움, 연등 유해중금속이나 방사선물질이 대기로부터 토지를 오염시켜서 토지에 서식하는 생물의 오염을 야기케 한다는 점등이 명백하여지고 있으며 대기의 오염은 이런 오염물질이 대기중에서 이동하여 강우에 의한 침강물질의 변화를 일으키게 되며 소위 광역오염문제를 발생케하며 동시에 토지의 토질저하등을 가져오게 한다. 물의 오염은 크게 내육수의 오염과 해양의 오염의 양면으로 나누어 볼 수 있다. 하천의 오염을 방지하고 하천을 보호하기 위한 움직임 역시 환경오염의 역사상 오래된 문제이며 시초에는 인분뇨와의 연결에서 오는 세균에 의한 오염이나 양수 기타 일반하수와의 연결에서 오는 오염에 대비하는 것부터 시작하였지만 근래에는 산업공장폐수에 의한 각종 화학적유해물질과 염료 그리고 석유화학의 발달에 의한 폐유등으로 인한 수질오탁문제가 점차 크게 대두되고 있다. 이것은 측 오염이란 시초에 우리에게 주는 불쾌감이 크므로 이것을 피하자는 것부터 시작하여 인간의 건강을 지키고 각종 사용수를 보존하자는 용수보존으로 그리고 이제는 건강과 용수보존뿐만 아니라 이것이 농림 수산물에 대한 큰 피해를 주게됨으로써 오는 자연환경의 생태계보전의 문제로 확대전환하고 있는 것이다. ?간 특히 해양오염에 대한 문제는 국지적인 것에만 끝이는 것이 아니고 전세계의 해양에 곧 연결되는 것이므로 세계각국의 공통관심사로 등장케 되었으며 이것은 특히 폐유가 유류수송 도중에 해양에 투기되는 유류에 의한 해양의 유막성형에서 오는 기상의 변화와 물피해등이 막심함으로 심각화 되고 있다. 각국이 자국의 해안과 해양을 보호하기 위하여 조치를 서두르고 있는 현시점에서 볼 때에는 이는 국제문제화하고 있으며 세계적인 국제적 협력과 협조의 필요성이 강조되는 좋은 예라 하겠다. 토양의 오염에 있어서는 대기나 수질의 오염이 구국적으로 토양과 관련되고 토양으로 환원되는 것이지만 근래에 많이 보급사용되는 농약과 화학비료의 문제는 토양자체의 오염에만 그치는 것이 아니고 농작물을 식품으로 하여 섭취함으로써 발생되는 인체나 기타생물체의 피해를 고려할 때 더욱 중요한 것이며, 또 토질의 저하를 가져오게 하여 농림생산에 미치는 영향이 적지 않을 것이다. 지반강하는 지각 에 주는 인공적 영향의 대표적인 것으로써 지하수나 지하 천연가스를 채취이용하기 위하여 파들어 감으로써 지반이 침하 하는 것이며 건축물에 대한 영향 특히 풍수해시의 재해를 크게 할 우려가 있는 것이다. 공간에 있어서의 환경오염에는 소음, 진동, 광선, 악취 등이 있다. 이들은 특수한 작업환경의 경우를 제외하고는 건강에 직접적인 큰 피해를 준다고 생각할 수 없으나 소음, 진동, 관선, 악취 등은 일반 일상시민생활에 불쾌나 불안을 줌으로써 안정된 생활을 방해하는 요인이 되는 것이다. 공간의 오염물로써 새로운 주목을 끌게된 것은 도시산업폐기물로써 이들은 대기나 물 또는 토지를 오염시킬 뿐만 아니라 공간을 점령함으로써 도시의 미관이나 기능을 손상케 하는 것이다. 즉 노배폐차의 잔해, 냉장고등고형폐기물등의 재생불가능한 것이나 비니루등 합성물질로 된 용기나 포장 등으로 연소분해 되지 않은 내구소비재가 이에 해당하는 것으로 이는 maker의 양식에 호소하여 그 책임 하에 해결되어야 할 문제로 본다. 이렇듯 환경오염은 각양각색으로 그 오염물질의 주요 발생원인 산업장이나 기타 기관에서의 발생요인을 살펴보며는 다음과 같은 것으로 요약할 수 있다. A. 제도적 요인 1. 관리체재의 미비 2. 관리법규의 미비 3. 책임소재의 불명확 B. 자재적 요인 1. 사용자재의 선택부적 2. 개량대책급 연구의 미흡 C. 기술적 요인 1. 시설의 설계불량, 공정의 결함 2. 시설의 점검, 보전의 불충분 3. 도출물의 취급에 대한 검사부족 4. 발생방지 시설의 미설치, 결함 D. 교육적 요인 1. 오염물질 방제지식의 결여 2. 법규의 오해, 미숙지 E. 경제적 요인 1. 자금부족 2. 융자상의 문제 3. 경제성의 문제 F. 정신적 요인 1. 사회적 도의심의 결여(이기주의) 2. 태만 3. 무지, 무관심 등이다. 따라서 환경오염의 방지란 상기한 문제의 해결에 기대하지 않을 수 없으나 이를 해결하기 위하여는 국내적 국제적 상호협조에 의한 사회각층의 총력적 대책이 시급한 것이다. 이와 같은 환경오염이 단속된다 하며는 미구에 인류의 건강은 물론 그 존립마저 기대하기 어려울 것이며, 현재는 점진적으로 급성피해에 대하여는 그 흥미가 집중되어 그 대비책도 많이 논의되고 있지만 미량의 단속접촉에 의한 만성축적에 관한 문제나 이와 같은 환경오염이 앞으로 태어날 신생률에 대한 영향이나 유전정보에 관한 연구는 장차에 대비하는 문제로써 중요한 것이라 생각된다. 기외에 우려되는 점은 오염방지책을 적극 추진함으로써 올 수 있는 파생적인 문제이다. 즉 오염을 방지하기 위하여 생산기업체가 투자를 하게 되며는 그만큼 생산원가가 상승할 것이며 소비가격도 오를 것이다. 반면 이런 시책에 뒤떨어진 후진국의 값싼 생산국은 자연 수입이 억제 당할 것이며, 이렇게되면 후진국은 무역경쟁에서 큰 상처를 입게될 것이고 뿐만 아니라 선진국에 필요한 오염물질의 발생이 높은 생산기기를 자연후진국에 양도하게 될 것임으로 후진국의 환경오염은 배가할 우려가 있는 것이다. 또 해양오염을 방지할 목적에서와 같이 자국의 해안보호를 위하여 마련된 법의 규제는 타국의 선박운항에 많은 제약을 가하게 될 것이며 이것 역시 시설이 미약한 약소후진국의 선박에 크게 영향을 미치게 될 것임으로 교통, 해운, 무역등을 통한 약소후진국의 경제성장에 제동을 거는 것이 될 것이다. 이렇듯 환경오염의 문제는 환경자체에 대해서만 아니라 부산물적으로 특히 후진국에는 의외 문제를 던져주게 되는 것임으로 환경오염에 대해서는 물론, 전술한 바와 같이 인간환경전체의 문제로써 Nixon 대통령이 말한 결의와 창의와 그리고 자금을 가지고 과감하게 대처해 나가야 할 것이다.

  • PDF