• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.387-390
• /
• 2009

앞으로 국제경쟁력 확보를 위해서는 성능중심의 건설기술기준 적용이 필요하다. 성능중심의 건설기준을 개발하고, 성능계약제도 도입방안을 구축함으로써 시설물의 성능을 향상시키고, 생애주기비용 (LCC)을 절감하며, 설계 및 시공자의 기술개발을 유도하는 것이 필요하다. 본 연구에서는 건축전기설비분야를 중심으로 에너지절약 요소기술을 발굴하고, 설계기준에 기술하기 곤란한 사항, 기술자가 효율적인 업무수행을 위하여 필요한 사항들을 도출하여 실무에 쉽게 활용하도록 설계편람을 작성하는데 있다.

• Korean Architects
• /
• no.2 s.52
• /
• pp.42-53
• /
• 1973

대부분의 건축가들에게는 규제 및 통제는 난센스라 생각되는 수가 있는데 이는 훌륭하게 설계된 건물이라 할지라도 그 건물을 법적으로 금지할 때가 종종 있기 때문이다. 건축분야에서 가장 진보된 규제 및 통제 방법은 건축기준과 지역ㆍ지구에 관한 규제(Restrictive Building Code & Zoning Ordinances)이다. 이 이외에 상식적으로 생각하더라도 여러 가지 제한을 들 수 있는데, 의뢰자의 취미, 융자조건, 여산, 재산세, 기후 및 대지조건과 기계설비의 제한요소가 있겠다. 우리는 건축 및 도시의 복잡한 미로에서, 우리의 주위 환경 속에서 인간의 목적과 희망을 달성하기 위한 규제들 중 어느 것이 최우선이어야만 되는가에 대한 통찰력을 잃어버렸다. 이런 문제들은 건축가에만 국한되지 않는다. 진정 여기에서 우리는 이 시대의 중요한 사회적, 정치적 문제점-공공권리와 개인권리의 공공책임과 개인책임의, 그리고 개인주도력과 공공주도력과의 한계에 직면하게 된다. 더구나, 이런 분야의 한계는 불명확해지며 더욱더 복잡화되며 다루기 어려워져 가고 있다. 본 장에서는 건축을 규제하는 요소들을 조사하겠다. 그리고 현 통제체제의 정신, 그 근원, 문제점, 단점, 타당성, 그리고 적용에 관하여 논해보기로 한다.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.87-97
• /
• 2022

Although the use of BIM in architectural projects has increased, repetitive modeling tasks and frequent design errors remain as obstacles to the practical application of BIM. In particular, interior finishing elements include the most varied and detailed requirements, and thus requires improving its modelling efficiency and resolving potential design errors. Recently, visual programming-based modules has gained traction as a way to automate a series of repetitive modeling tasks. However, existing approaches do not adequately reflect the practical modeling needs and focus only on replacing siimple, repetitive tasks. This study developed and evaluated the performance of three modules for automatic detailing of walls, floors and ceilings. The three elements were selected by analyzing the man-hours and the number of errors that typically occur when detailing BIM models. The modules were then applied to automatically detail a sample commercial facility BIM model. Results showed that the implementations met the practical modeling requirements identified by actual modelers of an construction management firm.

• Magazine of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.28-35
• /
• 2008

The Burj Dubai Project will be the tallest structure ever built by man; when completed the tower will be more than 700 meter tall and more than 160 floors. While the early integration of aerodynamic shaping and wind engineering considerations played a major role in the architectural massing and design of this multi-use/residential tower, where mitigating and taming the dynamic wind effects was one of the most important design criteria, the material selection for the structural systems of the tower was also a major consideration and required detailed evaluation of the material technologies and skilled labor available in the market at the time Concrete was selected for its strength, stiffness, damping, redundancy, moldability, free fireproofing, speed of construction, and cost effectiveness. In addition, the design challenges of using concrete for the design of the structural system components will be addressed. The focus on this paper will also be on the early planning of the concrete works of the Burj Dubai Project.

• Magazine of the Korea Institute for Structural Maintenance and Inspection
• /
• v.19 no.3
• /
• pp.27-32
• /
• 2015

• 보일러설비
• /
• s.86
• /
• pp.80-83
• /
• 2001

그린빌딩이란 ‘에너지절약과 환경보전을 목표로 에너지 절약(Energy), 고효율설비, 자원재활용, 환경공해 저감기술등을 적용하여 자연친화적(Ecology)으로 설계 건설하고 유지 관리한 후, 건물의 수명이 끝나 해체될 때까지도 환경에 대한 피해가 최소화되도록 계획된 건축물을 말한다.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.79-89
• /
• 2015

Once the building is higher than certain size, the wind effect plays very important role in structure design. Moreover, this is more important in Korea because dangerous phenomena like typhoons are common. Rational wind resistant design is being magnified considering the global flow and climate changes. This research presented the estimation method of design wind load using spatial information analysis based on 1:5,000 digital map and performed comparative analysis with actual application cases. The wind velocity pressure exposure coefficient and topographic coefficient turned out to be more quantitative and rational when calculated through the proposed method. The time and cost are comparatively low when compared with traditional method which contribute to the economic and rational wind resistant design.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.88-102
• /
• 2021

This study focused on the museums mainly holding permanent exhibitions except for the function of special exhibition in museum architectural works. This study aimed to draw the possibility to establish the relation between architectural form and central space of museums, by applying the forms like formal form, informal form, segment form, and diagonal form shown through a case study to total 164 work cases, reclassifying the architectural form into informal form, formal form, semi-formal form, segment form, diagonal form, and linear form, and then analogizing the matter of correlation between architectural form and central space of museums. The relevant contents could be summarized as follows. overall, most of the central spaces according with the informal architectural form of museums were the informal form, which showed 92.7% distribution rate. overall, there were many cases of informal architectural form of museums. Compared to the formal form, the informal architectural form showed the higher correlation with central space. The informal architectural form of museums is estimated to be continuously developing in the future. This study aims to present the basic data aiming for interior architecture design by considering the correlation between central space and architectural form.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.56-64
• /
• 2022

Although pilot projects have been actively carried out from 2017 to present to institutionalize CM at Risk, one of the major tasks for innovation in the construction industry, standards and processes related to Design VE, a key tool for determining GMP in the pre-construction phase, have not yet been established. Therefore, through research and operation status related to CM at Risk and Design VE, and survey on project participants' perception, the problem of the existing design VE process was derived, and the design VE process suitable for the CM at Risk project was proposed. The application plan was proposed in three aspects: Schedule, Cycle, and Process, and the appropriateness and applicability were verified through FGI. The results of this study are expected to be used as basic data on the establishment and legislation of order standards to be made in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7331-7339
• /
• 2014

As the Korean government initiates the Han-style campaign, the efforts and expectations for the modernization and industrialization of Hanok are growing. Accordingly, a major R&D project sponsored by the government is in progress for the development of related technologies, in which the development of a Hanok design support system based on Building Information Modeling(BIM) technology is included as one of the major subjects. However, the development of design tools for Hanok so far has not focused on the windows and doors, which is another major element of Korean traditional architecture. Therefore, this study developed a BIM-based design tool for Hanok windows and doors as an approach to the integrated design of various Hanok elements and their applications to modern buildings. To this end, the characteristics of Hanok windows and doors were analyzed first in terms of the location, opening method, style, components, and the over-all construction. A design tool was then developed with the parametric modeling functions of the $ArchiCAD^{(R)}$system. The applicability and efficiency of the developed tool were verified with design simulations. This is expected to contribute to not only the application of Hanok windows and doors to modern buildings but also to the further development of an integrated Hanok design system.