• 건축구조
• /
• v.13 no.3
• /
• pp.31-40
• /
• 2006

구조물의비탄성거동을알아내기위한여러가지의지진해석방법중에서비탄성시간이력해석이가장정확한응답을준다고알려져있지만실제내진설계에서이보다더쉽게비탄성거동을근사적으로파악할수있는방법이능력스펙트럼법(Capacity Spectrum Method: CSM)인데여기서는이방법의기본적인원리를소개하기로한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.68-71
• /
• 2009

IFC는 건축물의 전체 생애주기에 걸친 모든 정보들을 신속하고 정확하게 관련 참여자들과 교환 및 공유하기 위해서 개발된 중립적인 포맷, 즉 정보모델로서, 현재 많은 건축 관련 분야의 소프트웨어들이 지원하고 있다. 최근 BIM의 개요, 효과, 필요성 등이 널리 인식되면서 건물에 대한 정보를 표현, 저장, 교환, 공유하기 위한 표준적인 정보모델인 IFC의 중요성이 더욱 커지고 있다. 하지만, 건축물의 구조해석 및 구조설계 분야에서는 IFC를 적극적으로 활용하지 못하고 있는 실정이다. 이러한 현상에 대한 원인은 다양하지만, 가장 직접적인 원인은 IFC에 구조해석 및 구조설계 분야에서 필요한 정보모델이 완전하게 포함되어있지 않기 때문이다. 비록 IFC에 구조분야에 필요한 정보모델이 일부 포함되어 있지만 아직 발전시켜야 할 부분이 많이 있으며, 동적해석이나 비선형해석에 필요한 정보모델은 아직 개발되어 있지 않다. 이에 본 연구에서는 IFC의 구조분야 정보모델을 분석하고 그 활용사례 등을 검토하여 현황, 한계 및 문제점, 향후 기대사항 등을 고찰하고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.19-28
• /
• 2016

In the case of structural analysis for building structures, the super-structure and the sub-structure are analyzed by using separate structural models in the field because of time saving, facile result interpretation and easy analysis of dynamic behavior. However this separate structural model violated the compatibility condition of structural analysis and it can not consider the interaction of superand sub- structures. In the present study, the analysis results of this separate model were compared to those of the unified model of super- and sub- structures which can consider the interaction of super- and sub- structures and reflect the realistic boundary conditions. According to the comparison results, the the analysis model using separate models can underestimate the member force and deflection of structural members in the super-structures and overestimate the deflection and member force of sub-structures. Therefore, in the case of high-rise buildings, irregular shaped buildings, buildings which are expected to be affected by large differential settlement and remodeling buildings, the unified structural model for super- and sub- structures was recommended for structural analysis instead of the separate structural model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.1
• /
• pp.61-69
• /
• 2005

As long-span and light-weight deck floor slab are flexible and have low inherent damping, the significant floor vibration could be induced by residents' activities. These floor vibrations affect to safety and serviceability of building structures. So the vibration criteria are applied to the quality assessment of building structure. Therefore, the accurate vibration analysis should be performed for the correct assessment of deck floor slab. In this paper, practical analysis method with considering orthotropic rigidity of deck floor is proposed tot the accurate vibration analysis of dock floor slabs with form deck plates.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.1
• /
• pp.57-67
• /
• 2008

In general, the response spectrum analysis(RSA) method is wifely used for seismic analysis of building structures, and the time history analysis(THA) is applied for computation of structural vibration caused by equipments, machines and moving loads, etc. However, compared with the RSA method, the THA method is very complex, difficult and time consuming. In this study, the maximum responses for the vertical vibration are calculated conveniently by the RSA method. At first, the process for the RSA in excitation is proposed, and the maximum modal responses are combined by CQC and SRSS methods. Also, the responses obtained by the two modal combination methods are compared to the responses by the THA. And the correlation coefficients for human activities is proposed, and the RSA responses obtained by used to the correlation coefficients are calculated. Finally, results of the proposed method are compared with those of the time history analysis and correlation coefficients should be considered for the RSA of floor structure subjected to group dynamic loads.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.331-334
• /
• 2009

본 논문에서는 계측을 통한 초고층 무량판 구조물의 횡강성 산정식의 유효성을 검정하였다. 초고층 건축물의 풍진동은 건축물의 사용성 평가에 중요한 구조설계요인 중 하나이다. 신뢰성 있는 풍하중 및 풍진동을 얻기위해서는 정확한 고유주기의 예측이 중요하며 고유주기 예측에 오차가 있을 경우 하중을 지나치게 과대평가하게 되는 문제를 유발하게 된다. 본 논문에서는 최근들어 국내에서 본격적으로 증가하고 있는 초고층 무량판 구조시스템의 건축물에 대한 해석 모델링과 실측을 통하여 추정된 무량판 초고층 건물의 동적특성을 바탕으로 구조해석과 동적거동의 계측을 통하여 내풍설계를 위한 횡강성 및 주기를 산정하는 연구를 수행하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.275-278
• /
• 2009

전통 목구조 건축물은 크고 작은 부재가 많이 결구되어 있기 때문에 구조해석을 위한 모델링에 어려움이 있다. 기존에 제안된 모델링 기법은 모델링과 해석에 많은 시간이 필요하기 때문에 이를 개선할 수 있는 효율적인 방법이 필요하다. 본 연구에서는 전통 목구조 건축물 중 가장 많은 부재로 구성된 공포의 거동을 구현할 수 있으며 모델링과 해석에 소용되는 시간을 줄일 수 있는 모델링 기법을 제안하였다. 제안된 모델의 적합성을 확인하기 위하여 다양한 하중 재하 형태에 대한 유한요소 모델의 응답과 비교하였다. 해석결과에 따르면 제안된 모델의 응답은 유한요소해석결과와 10% 이내의 오차범위 안에 있어 공포의 해석시 보다 간편하게 활용할 수 있을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1107-1112
• /
• 2008

Since vibration properties of a building structure were not easy to find out through a test, it was very difficult to in advance evaluate an influence of earthquake or other excitations on the building structure. However, currently, along with the development of the vibration analysis technique, it is possible to predict the structural performances of the buildings. The prediction of the vibration properties of the building structure has mainly employed a two-dimensional plane analysis so far, but not a three-dimensional analysis. The two-dimensional plane analysis encounters a reliability problem when the building is asymmetrical. This study has performed a three-dimensional modeling and vibration analysis on residential buildings when a subway passes below.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.249-256
• /
• 2008

With consideration of the ongoing construction of high-rise buildings, it is becoming increasingly important to be able to accurately predict the behavior of them on the stage of design, construction and service. Even though many researchers have developed the analysis method to predict the behavior of high-rise buildings, their studies were based on the two dimensional frame structures composed of line elements such as beams and columns. Recently the high-rise buildings with flat-plate system is widely used because of its advantages. In this study a three dimensional analysis method is developed to analyze the behavior of the high-rise buildings with flat-plate system since it is difficult to model the structural systems reasonably with the existing two dimensional analysis method. The analysis method considered the construction sequence including the temporary work such as installation of form, removal of form, installation of shore, and removal of shore. Line elements were used to describe columns, beams, and shores and plate elements were used to model slabs. The creep and drying shrinkage of concrete were also considered to account for the inelastic behavior of concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2015

In evaluating lateral behavior on the seismic and wind load, the purpose of sensitivity analysis is to find critical variables and to identify characteristic response with variability of variables. The sensitivity analysis is very important in structural diagnosis, repair and reinforcement field. This study investigates the sensitivity by linear static analysis applying the TDA method in changing angles of diagrid braces on the same height structures. In case of mid rise model, under the seismic load, the brace member is determined as a major variable at $58^{\circ}$ but a high rise model, under the wind load, has the brace member as a major variable at $67.4^{\circ}$. In addition, location of critical sensitivity on the mid rise model is distributed over middle section, while it is distributed lower section on the high rise model.