• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.268-268
• /
• 2016

우리가 알고 있는 북한 수리 시설물들의 용량은 대부분 일제 시기의 자료나 북한과 국제기구에서 발행하는 간행물에 근거하고 있다. 그러나 실제 발전용량 및 저수용량은 기존 자료와는 차이를 보이는 것으로 조사되고 있다. 본 연구에서는 북한 수리 시설물들의 저수량을 재산정하고, 이를 추후 각종 조사 및 분석에 활용하고자 하였다. 이를 위해 해당 지역의 위성자료와 DEM(Digital Elevation Model) 자료를 수집 및 활용하였다. 북한지역의 DEM은 격자 크기 $100m{\times}100m$로 분석하였다. 북한 수리 시설물의 저수량 파악을 위해 Global Mapper 프로그램을 이용하였으며, DEM과 위성자료를 입력해서 분석하였다. 선정된 수리 시설물에 대한 유역경계를 설정하고, 수면표고별 저수면적 및 저수량을 산정하였다. 이를 통해 Hypsometric Curve와 수면표고-저수면적-저수량 곡선을 작성하였으며, 해당 시설물의 저수량을 평가하였다. 이러한 방법으로 북한 금야강발전소의 저수량을 산정한 결과 약 19억7천만$m^3$으로 나타났다. 금야강발전소의 높이는 약 90m, 발전용량은 18만kW 정도이고, 우리나라 소양강댐의 높이가 123m, 발전용량이 20만kW일때 총 저수용량이 29억$m^3$인 점을 감안하면 적절한 산정결과인 것으로 판단되었다. 본 연구의 성과는 추후 북한의 분석 가능한 수력발전소들의 실제 저수용량을 계산하며, 주요 지점별로 개발 가능한 저수량을 산정해서 각종 개발사업 계획 수립에 활용할 수 있을 것으로 기대된다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.2
• /
• pp.47-60
• /
• 2012

Based on the Korean Building Standard Law, a building less than 3-stories and $1000m^2$ in area is defined as a small-level building and, as a result, this type of building has been excluded from the requirement to comply with seismic design. In order to prevent the loss of life and property under earthquake loadings, the small-scale building should satisfy the seismic performance specified in the current code through a seismic retrofit. In this study, a seismic retrofit scheme of a Buckling-Restrained Knee Brace (BRKB) was developed for non-seismic 2-story steel buildings, including small-scale buildings, using a fragility contour method. In order to develop an effective retrofit scheme of the BRKB for the building, a total of 75 BRKB analytical models were used to achieve the desired performance levels and analyzed using the fragility contour method. The seismic performance of the retrofitted building was evaluated in terms of the weight of the developed BRKB systems. This study shows that the fragility contour method can be used for rapid evaluation and is an effective tool for structural engineers.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.177-188
• /
• 2021

In South Korea, with the advancement of the 'Port' project, the regeneration industry adapted to the modern economic development has been promoted, leading to construction around the port was also redefined. Therefore, through regeneration, the problem of image construction of buildings around the port has been re-examined, in which color is an important content of image construction. In this study, the exterior walls of abandoned factory buildings in the port area of Bongnaedong, Pusan were selected as the color research object and evaluated according to the characteristics of the regenerated factory buildings combined with the building color function. Technically, KSCP color analysis system is used for color analysis. In this way, the color plan for the exterior walls of the factory buildings is proposed to visually enhance the image of abandoned factory buildings and attract more attention, thus driving the regional economic development. The results of this study show that in order to adapt to the regional, industrial and commercial characteristics of the regenerated port space, the color hue, lightness, chroma and use area of the building can be changed to enhance the aesthetic value and enhance the inductivity and security.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.454-463
• /
• 2013

Upon changing architectural education system into 5-year program, the design studio in university should meet the requirement in order to acquire the accredition. This study investigates on student' perceptions and responses, according to the configuration(open, mixed, closed), to their studio environment. Results and suggestions are as follows for all types: First, there should be space for individual activities for the student: Second, excluding space for excluding space for the individual work, seperated area must be provided for co-operative work, such as making models; Third, a clear territorial distintion between the individual and the co-work space should be able to set by the students, using. for instance, movable partition or corridor; Fourth, however, in line with the types, a seperated lecture or seminar room in the open type, a device to prevent distraction such as noise in the mixed type, and more space for co-work in the closed type are also suggested.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.120-127
• /
• 2022

Nitrogen oxide(NOx) is a major cause of air pollution, exists in the form of nitrogen monoxide and nitrogen dioxide, and is harmful to the human body. Recently, a number of studies to reduce NOx in the atmosphere have been conducted, and these efforts have been the same in the field of construction materials. It is known that NOx can be efficiently removed by using a photocatalytic reaction. In this study, the NOx removal performance of the foam composite using activated carbon(AC) and titanium dioxide(TiO₂) was investigated. AC was used to enhance the photocatalytic reaction of TiO₂ by increasing the internal specific surface area of the foam composite. In this study, foam composites were prepared using the substitution rate of AC as the main variable. The NOx removal performance of specimen was evaluated according to the test method presented in ISO-22197-1. The specific surface area of the foam composite showed a tendency to increase according to the AC content, but decreased at 15% or more. Also, when the AC substitution rate was 15%, the NOx removal efficiency was the highest.

• Journal of Distribution Science
• /
• v.6 no.2
• /
• pp.5-19
• /
• 2008

This study aims to provide the present general state of basic data about refrigeration and freezing warehouses scold storages because basic data about refrigeration and freezing warehouses are insufficient and imperfect at the moment. Research contents include the present general state of cold storages such as sales amount, capital(money invested), storage possession state by type, keeping area, cold storage facility capacity, and facility state such as existence of rack, building structure and floor height, and possessed facility state. According to research results, it was found that 86.7% of refrigeration and freezing warehouses are located in the capital region and Busan region in terms of regional distribution, and the average keeping area was found to be bigger in these two regions than that of other regions. In addition, the research shows that more than 80% of companies possess bonded warehouses and there was no big difference in the size and capacity of refrigeration and freezing warehouses. Regarding building structure, most of them were found to be reinforced concrete. However, only 25% of companies installed racks, but there was no statistical significance between existence of rack and the amount of capital and sales. Possessed facilities were found in the order of freight elevator, information system and dock. When it comes to cargo gear, companies were found to possess 9.1 units of forklift and 2.2 units of reach stacker in average. This research is expected to lay a basis for investigating, predicting and developing the local cold storage industry, and more detailed studies will be needed in the future.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.152-157
• /
• 2012

Due to the global warming and energy exhaustion, energy efficiency improvement of construction is recognized the stream of times. To improve the efficiency of the building, in order to energy saving, passive elements should be applied. Then the first step be supposed that applying the new standards about the insulation boundary. The current insulation boundary standards are not reasonable as well as does not divide the purposes. As a result, energy is being wasted and many civil complaints are also occurred. To improve these problems, applying the insulation boundary need to divide the heating and non-heating and subdivide the purpose of construction. In this study, accurate real heating and air conditioning areas are presented that work on the new insulation boundary of purposes and applicable standards. This proposed, by the real heating and air conditioning areas, insulation boundary of purposes, matching the reasonable capacity and load of equipment, by working on standards by optimal maintenance can be energy saving, to present guidelines that environment improvement of actual residents as well as energy saving be expected.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.9-14
• /
• 2021

This paper discovers the energy loss factors through the insulation diagnosis of houses or buildings, and proposes directions for energy efficiency improvement. The energy efficiency factor of a building consists of insulation diagnosis, thermal bridge diagnosis, window diagnosis, airtight diagnosis, and equipment diagnosis. Among the residents and facilities in the energy welfare blind spot, an energy efficiency diagnosis was conducted for one senior citizen building located in Naju-si, Jeollanam-do, and energy efficiency diagnosis was conducted after insulation was installed. Energy measurement, diagnosis and analysis were performed using the IoT-based integrated wired/wireless energy diagnosis platform, Energy Finder. As a result of comparison, an overall energy saving rate of 16.38% was achieved. Annual heating energy consumption per unit area decreased from 333.51kWh before construction to 277.35kWh after construction, and annual cooling energy consumption per unit area decreased from 5.51kWh before construction to 5.22kWh after construction. The annual primary energy consumption per unit area decreased from 464.52kWh before construction to 403.69kWh after construction, and the annual energy cost was reduced from 3,063,307.14 won before construction to 2,641,072.49 won after construction. The additional improvement work is needed on the standards affecting energy efficiency other than insulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.340-352
• /
• 2018

This study presents a method to find the extant central halls with the plan most similar to the remains and to find out and compare the architectural style of extant buildings for the restoration. In the Joseon dynasty, there existed both remains and the extant hall. In particular, the $3{\times}2Kan$ hall is the minimum size that functions as the hall, so the number of comparison articles is small. The subjects are three remains and 29 Extant Halls. The absolute size of the comparison articles are the Area, Ratio of front/side, and the relative sizes are the Ratio of front Eokan/Hyeopkan and Ratio of the front Eokan/the side row. The Daeungjeon remain in Bugjijangsa is similar in absolute size and relative sizes to Oeosa daeungjeon. The Bubdang remain in Seonchalsaji is similar to Sangwonsa daeungjeon in the Area and Ratio of front/side, and similar to Daejeogsa geungnakjeon in the Ratio of front/side and Ratio of front Eokan/Hyeopkan. The Bubdang remain in Seungseonsaji is similar to Seodongsa daeungjeon in the Area, Ratio of front Eokan/Hyeopkan and Ratio of the front Eokan /the side row. Consequently, this method has high value as a way to expand by other comparison articles.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1996

The purpose of this study is to evaluate the urban land used by the Urban Land Use Information System (ULIS) which can supply the micro-level land usc information for the understanding of micro-level urban spatial structure and district-level planning and managements(such as urban design, redevelopment planning and district-level transportation planning, etc.). The study evaluates the current situation of urban land use database and suggests the prototype of urban land use database using GIS. The planning and management of post-modern city which has characterized by diversity and the mixture of land use, need more detail and quantitative information about land use. Recent redevelopment and reconstruction of existing physical condition are increasing the density of activity. It raises urban problems such as the shortage of infrastructure and traffic congestion, etc. In this process we need to construct information system which monitors current land use situation.