• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3894-3906
• /
• 2014

The aim of this study was to classify the central Buddhist temple among the state-designated cultural assets, which were measured precisely, into the gable roof buildings and the gambrel roof buildings to analyze the Ang-Goak, Inside waist, ridge ratio, and roof inclination represented on the roof, and prepare basic objective material for the restoration and repair of cultural assets. As a result, as for the relationship between the roof curve and the inclination of the gable roof building and gambrel roof building, the following conclusions could be drawn. First, the Ang-Goak and Inside waist of the gable roof building had a close correlation with the building size, and the internal high pillar existence. In addition, the Ang-Goak and Inside waist were shown in the 7-ryangga structure, which is greater in size than in the 5-ryangga structure. This was found to be related to the building size. Second, the Ang-Goak and Inside waist of the gable roof building has a correlation with each other, and it was found that Inside waist also was large in the building with a larger Ang-Goak. The roof inclination rarely had a connection with variable factors (plane factor, elevation factor, and cross section factor). The sizes of Ang-Goak, Inside waist, and ridge ratio were similar in the outside 1 chulmok and outside 2 chulmok of gongpo but those sizes were relatively larger in outside 3 chulmok. Third, the Ang-Goak and Inside waist of the gambrel roof building moved independently for each building without a correlation with each other, unlike the case of the gable roof building. The front and the side showed a correlation with each other, and in the building with the large curve of the front side, the curve was also large in the sides. Fourth, in the case of the building with a high pillar inside the gambrel roof building, the Ang-Goak and Inside waist were larger. On the other hand, they were smaller in the case of a building without a high pillar. This was found to have a close relationship with the building size. In addition, the ridge ratio has a close connection with the building size and building height. Therefore, the ridge ratio is larger in a high building or large sized building. The roof inclination rarely has a correlation with variable factors, as in the case of the gable roof building.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.17-25
• /
• 2013

Thermal storage technology used for indoor heating and cooling to maintain a constant temperature for a long period of time has an advantage of raising energy use efficiency. This, the phase changing material, which utilizes heat storage properties of the substances, capsulizes substances that melt at a constant temperature. This is applied to construction materials to block or save energy due to heat storage and heat protection during the process in which substances melt or freeze according to the indoor or outdoor temperature. The micro-encapsulation method is used to create thermal storage from phase changing material. This method can be broadly classified in 3 ways: chemical method, physical and chemical method and physical and mechanical method. In the physical and chemical method, a wet process using the micro-encapsulation process utilized. This process emulsifies the core material in a solvent then coats the monomer polymer on the wall of the emulsion to harden it. In this process, a surfactant is utilized to enhance the performance of the emulsion of the core material and the coating of the wall monomer. The performance of the micro-encapsulation, especially the coating thickness of the wall material and the uniformity of the coating, is largely dependent on the characteristics of the surfactant. This research compares the performance of the micro-capsules and heat storage for product according to molecular mass and concentration of the surfactant, SSMA (sulfonated styrene-maleic anhydride), when it comes to micro-encapsulation through interfacial polymerization, in which Dodecan-1 is transformed to melamin resin, a heat storage material using phase changing properties. In addition, the thickness of the micro-encapsulation wall material and residual melamine were reduced by adjusting the concentration of melamin resin microcapsules.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.27-47
• /
• 2018

In this study, we examine how land use zoning affects the land price controlling other variables such as road-facing condition of the land, land form, land age after its development and land size. We employ geographically weighted regression analysis which reflects spatial dependency as methodology with a data sample of land transaction price data of Jangyu, a new town, in Korea. The results of our empirical analysis show that the respective coefficients of traditional regression and geographically weighted regression are not significantly different. However, after calculating Moran's Index with residuals of both OLS and GWR models, we find that Moran's Index of GWR decreases around 26% compared to that of OLS model, thus improving the problem of spatial autoregression of residuals considerably. Unlike our expectation, though, in both traditional regression and geographically weighted regression where residential exclusive area is used as a reference variable, the dummy variable of the residential land for both housing and shops shows a negative sign. This may be because the residential land for both housing and shops is usually located in the level area while the residential exclusive area is located at the foot of a mountain or on a gentle hill where the residents can have good quality air and scenery. Although the utility of the residential land for both housing and shops is higher than its counterpart's since it has higher floor area ratio, amenity which can be explained as high quality of air and scenery in this study seems to have higher impact in purchase of land for housing. On the other hand, land for neighbourhood living facility seems to be valued higher than any other land zonings used in this research since it has much higher floor area ratio than the two land zonings above and can have a building with up to 5 stories constructed on it. With regard to road-facing condition, land buyers seem to prefer land which faces a medium-width road as expected. Land facing a wide-width road may have some disadvantage in that it can be exposed to noise and exhaust gas from cars and that entrance may not be easy due to the high speed traffic of the road. In contrast, land facing a narrow road can be free of noise or fume from cars and have privacy protected while it has some inconvenience in that entrance may be blocked by cars parked in both sides of the narrow road. Finally, land age variable shows a negative sign, which means that the price of land declines over time. This may be because decline of the land price of Jangyu was bigger than that of other regions in Gimhae where Jangyu, a new town, also belong, during the global financial crisis of 2008.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.761-778
• /
• 2017

The need of the underground space for the infrastructures in urban area is increasing, and especially the demand for shallow tunnels increased drastically. It is very important that the shallow tunnel in the urban area should fulfill not only its own safety conditions but also the safety condition for the adjacent structures and the surrounding sub-structure. Most of the studies on the behavior of shallow tunnels concentrated only on their behaviors due to the local deformation of the tunnel, such as tunnel crown or tunnel sidewall. However, few studies have been performed for the behavior of the shallow tunnel due to the deformation of the entire tunnel. Therefore, in this study the behavior of the surrounding ground and the stability caused by deformation of the whole tunnel were studied. For that purpose, model tests were performed for the various ground surface slopes and the cover depth of the tunnel. The model tunnel (width 300 mm, height 200 mm) could be simulationally deformed in the vertical and horizontal direction. The model ground was built by using carbon rods of three types (4 mm, 6 mm, 8 mm), in various surface slopes and cover depth of the tunnel. The subsidence of ground surface, the load on the tunnel crown and the sidewall, and the transferred load near tunnel were measured. As results, the ground surface subsided above the tunnel, and its amount decreased as the distance from the tunnel increased. The influence of a tunnel ceased in a certain distance from the tunnel. At the inclined ground surface, the wider subsidence has been occurred. The loads on the crown and the sidewall were clearly visible, but there was no effect of the surface slope at a certain depth. The load transfer on the adjacent ground was larger when the cover depth (on the horizontal surface) was lager. The higher the level (on the inclined surface), the wider and smaller it appeared. On the shallow tunnel under inclined surface, the transfer of the ambient load on the tunnel sidewall (low side) was clearly visible.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.246-259
• /
• 2021

Research has been conducted in various fields on a local fortress (eupseong) in the Joseon Dynasty, but the archaeological research on the prison (獄), which is part of the internal government, has not been conducted properly. Since the prison was first discovered in Gyeongju in 1997, there has been a necessity for research on the deployment and structure of the prison. This includes the office where jailers worked and had night duty and also the enclosure that keeps the prisoners inside. But the research came to a standstill because there was no comparative data. However, compared to the more recent findings of the Yeonil Prison and the Gonju Prison, we can identify that the structure was built during the early to the late Joseon Dynasty. King Sejong designed the standard prison blueprint called Anokdo (犴獄圖) in 1426 to manage prisoners nationwide and revised it once in 1439 to give better treatment during the winter and summer seasons. The Yeonil Prison operated from 1421 to 1743 and shows the structure of the prisons during the early to mid-Joseon period. It was very similar to the Gyeongju Prison on a smaller scale, which was operated until the late Joseon Dynasty with two main structures, one east and one west, and a circular fence. This structure was maintained even in the Gongju Prison during the late Joseon Dynasty, and it remains visible in photographs. The prison of the Joseon Dynasty had a circular fence with an estimated height of 3 meters and two buildings that separated male and female prisoners. The prison was divided into men on the east and women on the west with tile-roofed house structures that were difficult to escape. In front of the circular fence, there was an office with a thatched roof for the jailers and access to the prison was only possible through a double prison gate. The layout of the building reflects the improvements of the king's prison design made during Joseon Dynasty improving the environment of prisoners who are on trial and separating men and women in order to embody humanism.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.159-201
• /
• 2019

Along with Annex 14 Volume I establishment in 1951 and the set-up of restriction surface around the runway, aeronautical technique and navigation performance achieved dazzling growth, and the safety and precision of navigation greatly improved. However, restrictions on surrounding obstacles are still valid for safe operation of an aircraft. Standards and criteria for securing safety of aircraft operating around and on airport is stated in Annex 11 Air Traffic Services and Annex 14 Aerodrome etc. In particular, Annex 14 Volume I presents the criteria for limiting obstacles around an airport, such as natural obstacles such as trees, mountains and hills to prevent collisions between aircraft and ground obstacles, and artificial obstacles such as buildings and structures. On the other hand, Annex 14 Volume I, in the application of the obstacles limitation surfaces, apply the exception criteria, as it may not be possible to remove obstacles that violate the criteria if the aeronautical study determines that they do not impair the safety and regularity of aircraft operation. Aeronautical study has been applied and implemented in various countries including United States, Canada and Europe etc. accordingly, Korea established and amended some provisions of the Enforcement rules of the Aviation Act and established the Aeronautical study guidelines to approve exceptions. However, because ICAO does not provide specific guidelines on procedures and methods of Aeronautical study, countries conducting aeronautical study have established and applied their own procedures and methods. Reflecting this realistic situation, at the 12th World Navigation Conference and at the 38th General Assembly, the contracting States demanded a reexamination of the criteria for current obstacle limitation surfaces and methods of aeronautical study, and the ICAO dedicated a team of experts to prepare new standard. This study, in line with the movement of international change in obstacle limitation surface and aeronautical study, aims to compare and analyze current domestic and external standards on obstacle limitation and height limits, while looking at methods, procedure and systems for aeronautical study. In addition, expecting that aeronautical study will be used realistically and universally in assessing the impact of obstacles, we would recommend the institutional improvement of the aeronautical study along with the development of quantitative analysis methods using the navigation data in the current aeronautical study.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.64-80
• /
• 2018

In Korea, citizens can only know general information about crime. Thus it is difficult to know how much they are exposed to crime. If the police can predict the crime risky area, it will be possible to cope with the crime efficiently even though insufficient police and enforcement resources. However, there is no prediction system in Korea and the related researches are very much poor. From these backgrounds, the final goal of this study is to develop an automated crime prediction system. However, for the first step, we build a big data set which consists of local real crime information and urban physical or non-physical data. Then, we developed a crime prediction model through machine learning method. Finally, we assumed several possible scenarios and calculated the probability of crime and visualized the results in a map so as to increase the people's understanding. Among the factors affecting the crime occurrence revealed in previous and case studies, data was processed in the form of a big data for machine learning: real crime information, weather information (temperature, rainfall, wind speed, humidity, sunshine, insolation, snowfall, cloud cover) and local information (average building coverage, average floor area ratio, average building height, number of buildings, average appraised land value, average area of residential building, average number of ground floor). Among the supervised machine learning algorithms, the decision tree model, the random forest model, and the SVM model, which are known to be powerful and accurate in various fields were utilized to construct crime prevention model. As a result, decision tree model with the lowest RMSE was selected as an optimal prediction model. Based on this model, several scenarios were set for theft and violence cases which are the most frequent in the case city J, and the probability of crime was estimated by $250{\times}250m$ grid. As a result, we could find that the high crime risky area is occurring in three patterns in case city J. The probability of crime was divided into three classes and visualized in map by $250{\times}250m$ grid. Finally, we could develop a crime prediction model using machine learning algorithm and visualized the crime risky areas in a map which can recalculate the model and visualize the result simultaneously as time and urban conditions change.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.124-139
• /
• 2013

Choi Cheon-yak(about 1684~1755) is an artist who left the various artistic works such as sculptures of royal tombs, architectures. In addition, he was not only a skilled caster but also an able artisan carving jade in the early Joseon Dynasty period. Starting from making royal seals of King Suk-jong, he had made more than about 40 Royal seals until 1755. Choi Cheon-yak was well known as a skilled jade craftsman. Another of his great abilities was to carve subjects into ideal figures. In virtue of his greater abilities, he could take part in the process of constructing Royal tombs and sculpting the stone statues of military officials' which were erected at aristocrats' tombs. With these accumulated skills, when he was in charge of designing the folding screen stones for King In-jo's Jang Neong, he could even replace 12 animals system and clouds with peonies and lotus. Among his various abilities, his skill in carving a sculpture can stand comparison with any other contemporaries. His sculpture skill was at its zenith in 1752, the stone statues of military officials' at the Ui soseson's tomb count his showpiece that describes a model at the age of his late teens and is a realistic and portrayal sculpture, which met the royal family's dignity. In the same year, the stone statues of military officials' constructed by Choi Cheon-yak was elected in front of the Jo Hyen-myeong's tomb(1690~1752). This masterpiece referred to the armor of those of King Gong-min Neong and newly added a helmet and the patterns of a tortoise shell. These patterns of a tortoise shell were passed down to Park Moon-su's tomb in 1756 and Queen Jeong-sung's Hong Neung by his colleagues : Kim Ha-jeong and Byeon Yi-jin etc. He was one of the greatest sculptors in the $18^{th}$ century. People in Joseon praised him highly for his imaginative work from an amorphous object. Especially, these stone statues of military at Jo Hyeonmyeong's tomb shows the proofs of his supreme artwork.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.56-69
• /
• 2011

A Gamsil is an ritual instrument which enshrine the ancestral tablets of four lines from late great-great-grandfather and grandmother to late father and mother. This has their soul. Juja's "Garye" informs its structure pattern. It is placed in Sadang and takes the form of a perfectly square box. It partitions four rooms and enshrine an ancestral tablet room by room. They get the ancestral tablets line up from west to east. And they also enshrine the ancestral tablets without his descendant together in Gamsil. A Gamsil is a space to enshrine the ancestral tablets and to place an order within a family. A social status and A family economic power become a standard in making and managing Sadang. Kingdom in Joseon period limited the ancestral tablets considering of his degree of official rank which descendant enshrined. A official servant can be stable economically in getting a stipend and build sadang in the house. While household a little in economic enshrine the ancestral tablets at a Gamsil placed at the a space of private home. His personal circumstances make size and pattern, place change in relation to Gamsil. A Gamsil looks like house in structure and pattern. It has the immortality of the soul. And it changed from a table size to a ancestral tablet size. This Gamsil is comfortable to move and is made considering of the width and height of household. The transition of Gamsil means institutions is in close to a family economic power in social change. Kingdom in Joseon early period makes a policy of a Gamyo's build and an ancestral enshrine in basement of Juja's "Garye". The transition of Gamsil gave a common people limitted socially and institutionally the service of late four lines. Most of people enshrine the ancestral tablets of their four lines in approaching of in the late of Joseon Dinasty. They compromise on their reality and cause. The transition of Gamsil implied many different things in social ; the authenticity search and a dignity expression of his family, the foundation for the diffusion of an ancestral service, a space sharing with ancestor and descendent, the increment of a family economic power etc.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.351-373
• /
• 2019

The cold eddies around the Ulleung Basin in the East Sea were identified from satellite altimeter sea level data using the Winding-Angle method from 1993 to 2015. Among the cold eddies, the Dokdo Cold Eddies (DCEs), which were formed at the first meandering trough of the East Korea Warm Current (EKWC) and were pinched off to the southwest from the eastward flow, were classified and their migration patterns were analyzed. The vertical structures of water temperature, salinity, and flow velocity near the DCE center were also examined using numerical simulation and observation data provided by the Hybrid Coordinate Ocean Model and the National Institute of Fisheries Science, respectively. A total of 112 DCEs were generated for 23 years. Of these, 39 DCEs migrated westward and arrived off the east coast of Korea. The average travel distance was 250.9 km, the average lifespan was 93 days, and the average travel speed was 3.5 cm/s. The other 73 DCEs had moved to the east or had hovered around the generated location until they disappeared. At 50-100 m depth under the DCE, water temperature and salinity (T < $5^{\circ}C$, S < 34.1) were lower than those of ambient water and isotherms made a dome shape. Current faster than 10 cm/s circulates counterclockwise from the surface to 300 m depth at 38 km away from the center of DCE. After the EKWC separates from the coast, it flows eastward and starts to meander near Ulleungdo. The first trough of the meander in the east of Ulleungdo is pushed deep into the southwest and forms a cold eddy (DCE), which is shed from the meander in the south of Ulleungdo. While a DCE moves westward, it circumvents the Ulleung Warm Eddy (UWE) clockwise and follows U shape path toward the east coast of Korea. When the DCE arrives near the coast, the EKWC separates from the coast at the south of DCE and circumvents the DCE. As the DCE near the coast weakens and extinguishes about 30 days later after the arrival, the EKWC flows northward along the coast recovering its original path. The DCE steadily transports heat and salt from the north to the south, which helps to form a cold water region in the southwest of the Ulleung Basin and brings positive vorticity to change the separation latitude and path of the EKWC. Some of the DCEs moving to the west were merged into a coastal cold eddy to form a wide cold water region in the west of Ulleung Basin and to create a elongated anticlockwise circulation, which separated the UWE in the north from the EKWC in the south.