• Proceedings of the KSME Conference
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.187-192
• /
• 2000

The textile which is rotated in the tumbler dryer is dried by the heated air. the energy consumption for drying textile depends on various parameters. The objective of this study is to save the energy and the drying time. One of the various methods for energy saving is EGR(exhaust gas recirculation). We set the drying equipment for this study and perform the experimental study with the changes of the recirculation rate, the input power, and the air mass flow rate. We found the optimal drying conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.909-910
• /
• 2012

Shipbuilding is an order made assembly production basically. To build a single vessel, it costs hundreds of thousands small and big parts and million tons of structural steel. From contract to delivery, It takes 2 years of time in general. Shipbuilding parts are supplied order made based in and out of the country. For the cost and efficiency issue, on-time supply of ship parts is critical. Thus, this study suggests the optimum material management system plan of ship components for the best result.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2020년도 추계학술대회
• /
• pp.66-67
• /
• 2020

대한민국은 정부의 지원 아래 해기사 양성을 위한 교육훈련이 체계적으로 이루어지고 있다. 특히 다른 나라와는 달리 실습을 목적으로 설계-건조된 고가의 신조 실습선을 제공함으로써 실습생의 안전 확보와 효율적인 실습이 가능하도록 지원하고 있다. 이러한 제도에 의하여 최근 몇 척의 실습선이 퇴역하였으나, 이러한 퇴역 실습선에 대한 활용 방안은 정립되어 있지 않다. 이에 퇴역 실습선의 현황과 문제점을 고찰하고 이를 토대로 효율적인 활용을 위한 방안을 제시한다.

• Journal of Ginseng Research
• /
• 제26권4호
• /
• pp.202-205
• /
• 2002

This study was carried out to investigate the optimum conditions for extraction of acidic polysaccharide from red ginseng marc produced by manufacturing alcoholic and water extract from red ginseng. Extraction efficacy of acidic polysaccharide from dried red ginseng marc was higher than that before drying. The appropriate conditions for the extraction of acidic polysaccharide from red ginseng marc were particle size under 3.35 mm after drying red ginseng marc, 1∼2 hours of extraction time and 2∼3 extraction times, respectively. The amount of acidic polysaccharide in water extract from red ginseng marc treated with $\alpha$-amylase and cellulase increased about 20∼50%. From the above resuts, we suggest that red ginseng marc produced by manufacturing alcoholic and water extract of red ginseng has higher potencies in the utilization of waste materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제66권4호
• /
• pp.358-364
• /
• 2021

This study was conducted to select a desiccant and determine its concentration for safe usage to improve the harvesting efficiency of soybeans. Soybeans were treated with a desiccant (non-selective herbicide) before and after the maturation stage. The drying effect of the desiccant was higher at earlier treatment times than at the maturation stage, but the difference was not statistically significant. The higher efficacy might be related to the drying process of the leaves and stems, with most of the leaves and stems having already been dried by the time of hand harvesting. Desiccant treatments had no adverse effects on soybean yield, weight of 100 grains, seed quality, or seed germination rate compared with the untreated control. Pesticide residue analysis showed minimum residue concentration to be lower than the tolerance level of pesticide residues. In conclusion, it was confirmed that the desiccant was effective in drying soybean, and that there was no damage to the quality of soybean seeds. In addition to the drying effect, the dessicant treatment also facilitates the removal of weeds that interfere with the mechanical harvest and improves harvesting efficiency through the drying of the growth imbalanced individual. The desiccant treatment is expected to shorten the mechanical harvesting time by 1-2 weeks. It is thought that the selection of the proper cultivation period for other crops after soybean cultivation will be more advantageous.

• Journal of the Korean Applied Science and Technology
• /
• 제34권2호
• /
• pp.305-314
• /
• 2017

The purpose of this study was to develop the high efficiency of ginseng by using microwave low temperature vacuum drying technology. In red ginseng manufacturing processes, the study results compared the hot-air drying red ginseng dried during 24hours in $60-70^{\circ}C$ and redried during 72hours in $40^{\circ}C$ after the steaming ginseng with the red ginseng dried in microwave low temperature vacuum dryer on condition that 900 watt, 2.45 MHz, 50 mmHg during 5 hours and redried during 2 hours on 750 mmHg after the steaming ginseng about observation of tissue, sensory evaluation and a change of ginsenoside and crude saponin content. As a result, the red ginseng in microwave low temperature vacuum was had high brightness, the surface turned into porosity tissue and added more flavor, decreased bitterness highly on the contrary increased sweetness at the same time that elevated the comprehensive preference. Moreover, In a short time, the content of ginsenosides $Rg_1$ and $Rb_1$ increased about sixfold, eightfold in one time zone but there were no wide difference in content of $Rg_3$ as compared to the hot-air drying red ginseng. Finally, content of crude saponin was increased widely at 10-20 minutes and stayed high crude saponin content consistently. Therefore, this result indicated that the red ginseng in microwave low temperature vacuum increased extraction yields of the ginsenosides and crude saponin through a change of porosity tissue and improved flavor and texture compare with the general hot air dried red ginseng in a short time. According to these results, that provided that could increase the preference about red ginseng.

• Korean Journal of Agricultural and Forest Meteorology
• /
• 제17권1호
• /
• pp.75-84
• /
• 2015

This study was conducted to investigate the effects of high temperature and drought on growth performance, photosynthetic parameters and photosynthetic pigment contents of Liriodendron tulipifera L. seedlings. The seedlings were grown in controlled-environment growth chambers with combinations of four temperature ($-3^{\circ}C$, $0^{\circ}C$, $+3^{\circ}C$, $+6^{\circ}C$; based on the monthly average for 30 years in Korea) and two water status (control, drought). Temperature rise increased growth, total dry weight and leaf area in all water status. Also photosynthetic rate, dark respiration, stomatal conductance and transpiration rate increased with increasing temperature. In contrast, growth and photosynthetic parameters of L. tulipifera seedlings were lower in $-3^{\circ}C$ than $0^{\circ}C$. But temperature rise decreased water use efficiency in all water status. Temperature rise increased photosynthetic pigment contents of leaf. Also chlorophyll a/b ratio increased with increasing temperature. In conclusion, the elevated temperature lead to causes growth increase through the increase of energy production by higher photosynthetic rate during a growth period of L. tulipifera seedlings.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.327-330
• /
• 2009

PSC 박스 교량의 시공 중 거동 특성을 고려하기 위하여 뼈대 요소를 이용한 시공단계의 설계가 수행되고 있다. 그러나 PSC 박스 교량 중 곡선 램프교 등의 경우는 교량의 외측 및 내측의 변위 및 응력 값이 현저히 다르다. 따라서 PSC 박스 교량의 텐던량 및 시공 중 긴장력이 외측 및 내측에서 다르게 산정되어야 함에도 불구하고 현실적으로는 계산이 불가능하여 같은 양의 텐던과 부적절한 긴장력을 사용하고 있어 비효율적인 설계와 시공이 이루어지고 있다. 이러한 문제점을 해결하기 위하여 내외측의 텐던량을 다르게 고려할 수 있고 교량의 내외측 반력, 응력, 변위 분포를 얻을 수 있는 3차원 해석이 필수적으로 요구 되고 있다. 본 연구에서는 PSC 박스 교량의 3차원 거동 해석을 위하여 텐던 및 크리프, 건조수축을 반영한 준적합 쉘요소를 이용하여 수치해석을 수행하였으며 크리프 및 건조수축의 특성은 ACI코드와 CEB/FIP 코드를 적용하여 비교분석하였다. 각각의 결과 값이 상이한 경우도 있지만 대체로 두 코드는 비슷한 양상을 보였으며 CEB/FIP 가 좀 더 경제적인 설계가 됨을 알 수 있었다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 한국환경과학회 2008년도 추계학술발표회 발표논문집
• /
• pp.517-521
• /
• 2008

Struvite의 최적 생성조건은 NH$_4$-N의 초기농도에 관계없이 모두 NH$_4^+$, PO$_4^{3-}$ 및 Mg$^{2+}$가 등몰비이고 pH 10.5이었다. Struvite 침전반응에서 NH$_4$-N 및 PO$_4$-P 제거율에 미치는 struvite seeding 효과는 습윤상태의 struvite를 seeding할 경우 그 효과가 거의 없었으나 건조된 struvite를 seeding할 경우 NH$_4$-N의 제거율은 증가되지만 PO$_4$-P의 제거율은 감소되는 경향을 나타냈다. 이는 건조과정에서 struvite의 NH$_4$-N가 휘산되어 소실되었기 때문이다. Mg와 P원으로서 struvite의 재이용을 위한 적정 건조온도는 100$^{\circ}C$ 이하였으며 그 이상 온도에서는 struvite가 $NH_4MgPO_4\cdot6H_2O$형에서 MgPO$_4$형으로 상전이점에 따라 struvite seeding에 의한 NE$_4$-N의 제거율이 현저히 감소되었다. 건조된 struvite는 초기 NH$_4$-N의 몰농도 대비 50%를 seeding할 경우 60% 이상의 NH$_4$-N를 제거하였으며, seeding량을 150%로 증가시킬 경우 90% 이상의 NH$_4$-N 제거율을 얻을 수 있었다. 그러나 struvite를 반복 재사용할 경우 재사용 횟수에 비례하여 NH$_4$-N의 제거율은 감소하는 경향을 보여 재사용 횟수가 제한적임을 알 수 있었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제2권1호
• /
• pp.87-98
• /
• 1994

Sludge minimization in an water treatment plant can be achieved by optimizing a main water treatment process as well as by enhancing a thickening and a dewatering facilities. In this study, dewatering and drying techniques for reducing the quantity of the water sludge generated from the conventional water treatment plant in the local states were investigated by reducing its water content. Not only the types and dosages of polymers but also the mixing intensity of the mixtures of a concentrated sludge and polymers on the different pH were evaluated for the optimum dewatering conditions of the water sludge. Weight reduction of the water sludge was also tested at a given temperature range. The dewatering efficiency of the water sludge was not affected by the types of polymer but by mixing intensity(GT value) in this study. pH effect on dewaterbility of the water sludge took a major role at the neutral pH range. The optimal polymer dose was 1.5 mg-polymer/g-TSS(about 40mg/L as polymer). Dewaterability was enhanced at a lower mixing intensity(GTbelow 10,000 sec-1). Free water in the void of sludge cake was dried around $100^{\circ}C$, chemical bound water was evaporated around $320^{\circ}C$, and organic material was burned out at the range of 300 to $600^{\circ}C$. Ignition losses of the water sludge were varied 15 to 40 % as the raw water quality. The ignition loss due to the chemical bound water was 10-20% and the loss due to the organic material was 4-20% of the total ignition loss.