Proceedings of the Korean Journal of Food and Nutrition Conference
/
1997.06b
/
pp.11-12
/
1997
니트로소디메틸아민이 발암성 물질이라는 것이 1954년 Barnes와 Magee에 의해 발견된 이래 이것이 지금까지 학자들에게 관심의 대상이 되고 있는 이유는 발암력이 강하여 극미량으로도 생체내에 암을 유발시킬 수 있을 뿐만 아니라, 대부분의 발암성 물질이 신체의 특정기관에 발암작용을 나타내는데 비해 이 물질은 신체의 여러 부위에 암을 유발시킬 수 있다는 점 그리고 이 물질이 햄, 소시지, 베이컨, 알코올음료, 김치 및 어류 가공품 등 어려 가지 식품에 널리 분포되어 있다는 사실 등을 들 수 있다. 니트로소 화합물은 구조로 보아 티트로소아민과 니트로소아미드로 구분되는데 전자는 제 2급 아연이 산화질소 유도체와 반응하여 생성된 니트로소 유도체이과 후자는 오소, 아미드 등이 치환된 니트로소 유도체로서 화학적인 성질이나 생물학적인 작용이 상이하다. 즉 니트로소아민은 식품에서 안정한 화합물인 반면에 대부분의 니트로소아미드는 불안정하다. 지금까지 연구된 바에 의하면 3백 여종의 니트로소 화합물에 대하여 동물실험을 행한 결과 발암성이 90% 이상 인정되었다. 식품 중 니트로소 화합물의 전구물질 중 질산염과 아질산염은 식품의 가공 저장 및 조리과정 중 니트로화의 된 전구물질인데 이는 육가공품의 색소고정, Cl. Botulinum에 의한 식중독 방지 및 풍미의 향상을 위하여 수 세기 동안 식품첨가제를 사용되어 왔으며, 유럽이나 미국 등지에서는 아직도 육가공품에 아질산염의 첨가가 논란의 대상이 되고 있다. 식품 중 니트로소 화합물에 대한 북유럽 식품 3천여 점을 분석한 결과 검출된 니트로소 화함물은 니트로소디메틸아민이 대부분이며 맥주에서 66%로 검출률이 가장 높았고 다음으로 염지육 및 치즈의 순 이었다. 조리한 일본산 해산 식품 중에 니트로소디메틸아민이 최고 313$\mu$g/kg, 캐나다산 해산 건조 식품에서는 67$\mu$g/kg, 홍콩산 염건어에는 1,400 $\mu$g/kg , 훈연어류에는 N-nitrosothiazolidine이 13,700 $\mu$g/kg , 우리 나라 해산 식품 중 니트로소디메틸아민은 건조가오리, 동결건조명태, 건조오징어, 굴비 및 소건새우 등에서 2.8~86.0 $\mu$g/kg 으로서 비교적 높은 양이 검출되었을 뿐 아니라 이들 식품을 조리할 경우 3.6~13배 증가하였다. 또한 김치와 젓갈류 중에서도 니트로소디메틸아민이 검출된다는 연구가 있다. 식품 중 니트로소 화합물의 생성율 억제시키기 위하여 최근 20여년간 연구된 바를 요약하면 아스코르브산과 같은 억제제의 첨가, 가공방법 및 조리방법의 개선이 비교적 바람직한 방법으로 인정되고 있다. 위의 방법을 적용하여 베이컨을 조리한 결과 낮은 온도에서 오랜 시간 가열하는 것이 높은 온도에서 짧은 시간 가열한 것보다 니트로화 반응이 훨씬 낮았고 또 마이크로웨이브로 조리하는 것이 니트로소아민을 최소화 시키는 방법이었다. 염지육은 아스코르브산이나 토코페롤 등의 니트로화 억제제를 첨가할 경우 니트로소 화합물이 현저히 감소 하였는데 이는 산화질소의 소거 능력이 우수하기 때문인 것으로 밝혀졌다. 가공방법의 개선으로서는 가공시 식품을 공기에 노출시킬 경우 특히 직화로 가열된 공기에 노출되면 니트로소아민의 생성이 매우 높은 것으로 보고되어 있는데 그 대표적인 예로 맥아를 직화로 건조할 경우 맥주 중에 니트로소 화합물이 훨씬 높은 양이 검출된다고 보고되어 있다. 대체로 식품의 가공 조리 및 저장 중 니트로소화합물에 대한 메커니즘은 상세히 밝혀져 있으나 생체내에서의 생성이나 억제 등에 대한 연구는 아직도 미흡한 실정이라이 분야에 대한 연구가 절실히 요구된다.
The recycling of titanium turning scraps requires the removal of cutting oil and other contaminants remaining on the surface. In this study, an experiment was conducted in which titanium scraps were cleaned by a combination of ultrasonic immersion-steam cleaning and subsequent drying at high temperature. To determine the removal mechanism of cutting oil, the contact angle between titanium surface and cutting oil was measured. The result confirmed the optimum condition of the immersion solution of the titanium turning scraps. In the case of immersion cleaning of Na4P2O7 aqueous solution, the degree of carbon removed in the cutting oil was the highest at 50℃, and it was confirmed that the carbon content obtained from the combination of steam cleaning and ultrasonic immersion-steam cleaning was lower than that from steam cleaning after ultrasonic immersion. The oxidation and decomposition behaviors of cutting oil were investigated using Thermogravimetric analysis (TGA) and the result was applied in the high temperature drying process. From the results of the high temperature drying tests, it was concluded that 200℃ is the optimal drying temperature.
Proceedings of the Korean Geotechical Society Conference
/
2002.03a
/
pp.773-778
/
2002
강우시 불포화 자연사면의 파괴메커니즘을 규명하기 위하여 사면내 모관흡수력의 변화를 고려한 안정해석을 수행하였다. 사면에는 강우계, Tensiometer, Pizometer, Water mock, 경사계 등이 설치되었으며 강우시 사면내 부간극수압과 임시지하수위의 거동을 관찰하였다. 실내실험으로부터 불포화 사면의 안정해석을 위하여 입력 값으로 사용되는 불포화투수계수, 불포화강도정수를 시료의 No.200체 통과량과 건조밀도를 기준으로 경험계수를 이용하여 추정 사용하였다. 강우의 침투로 인한 사면내 부간극수압의 분포는 계측값과 수치해석결과가 차이를 보였으며 이는 불포화 흐름시 흙속의 공기의 영향, 강우의 나무와 수풀에 의한 중간차단효과 및 증발의 영향을 해석에 고려하지 못했기 때문으로 사료된다. 사면안정해석결과 강우초기 모관흡수력을 고려하는 경우 약 10%의 안전율의 증가를 나타냈으며, 침투가 진행되면서 그 차이는 좁아져 임시지하수위가 표층까지 도달했을 때 흡수력을 고려하지 않는 해석과 안전율은 일치하였다.
Yeon-Jun Yoo;Byung-Jae Lee;Joo-Kyoung Yang;Yun Lee
Journal of the Korea institute for structural maintenance and inspection
/
v.27
no.6
/
pp.138-143
/
2023
In this study, the crack healing performance of each crack healing agent manufacturing method was analyzed by adding crack healing agents in the form of alginate gel and spore suspension inoculated with endospores of calcium carbonate-forming bacteria to mortar. In addition, by applying it to an full-scale structure in the form of a box-type culvert, we attempted to create an environment in which the developed crack healing agent can be applied not only to a laboratory environment but also to an actual field. The crack healing agent using the dry heat drying method showed crack healing performance, but in the case of the freeze drying method, many spores were killed by freeze hardening and therefore the crack healing performance was lost. As a result of SEM and XRD pattern analysis of the presumed crack healing material extracted from the crack of a full-scale structure, it was found to be calcite, one of the calcium carbonate crystals produced by microorganisms applied to the crack healing agent. In conclusion, it was found that the crack healing by microorganisms can be implemented in a real structure.
In, So-Ra;Jung, Sueng-Pil;Shim, JaeKwan;Choi, Byoung-Choel
Journal of the Korean earth science society
/
v.37
no.4
/
pp.187-199
/
2016
The purpose of this study is to investigate the formation mechanism of landspout by using the Cloud Resolving Storm Simulator (CReSS). The landspout occurred over Ilsan, Goyang City, the Republic of Korea on June 10, 2014 with the damage of a private property. In synoptic environment, a cold dry air on the upper layers of the atmosphere, and there was an advection with warm and humid air in the lower atmosphere. Temperature differences between upper and lower layers resulted in thermal instability. The storm began to arise at 1920 KST and reached the mature stage in ten minutes. The cloud top height was estimated at 9 km and the hook echo was appeared at the rear of a storm in simulation result. Model results showed that the downburst was generated in the developed storm over the Ilsan area. This downburst caused the horizontal flow when it diverged near the surface. The horizontal flow was switched to updraft at the rear of storm, and the rear-flank downdrafts (RFDs) current occurred from simulation result. The RFDs took down the vertical flow to the surface. After then, the vertical vorticity could be generated on the surface in simulation result. Subsequently, the vertical vorticity was stretched to form a landspout. The cyclonic vorticity of echo hook from simulation was greater than $3{\times}10^{-2}s^{-1}$(height of 360 m) and landspout diameter was estimated at 1 km.
Lee, Sun Myung;Jin, Hong Ju;Yun, Ji Hyeon;Kwon, Oh Young
Journal of Conservation Science
/
v.36
no.5
/
pp.368-382
/
2020
It was confirmed that a white porcelain figurine in underglaze iron was damaged after exhibition. This study analyzes the current state of salt damage on the artifact and identifies the factors contributing to its deterioration by examining the material characteristics of the artifact and exhibition environment. The analysis will thus assist in preparing a conservation scheme for artifacts. The crystallized carbonate on the surface of the white porcelain figurine is a water-soluble alkali salt with high hygroscopicity and high solubility in water. This solubility increases as the temperature increases. The figurine was low-fired at approximately 1000℃. A lead glaze was applied, and thin cracks were formed on the glazed surface, indicating poor surface properties. Our analysis suggested that the showcase used in the exhibition likely created a moist environment resulting from condensation, as it was exposed to high temperature and relative humidity, particularly in comparison to the exhibition room where the temperature was regulated using an air conditioner. In addition, the artifacts in the showcase were exposed to sudden changes in temperature and relative humidity as the air conditioner was repeatedly turned on and off. Therefore, it can be deduced that the soluble salt remaining on the white porcelain figurine moved toward the surface of the relatively weak glaze as a result of the temperature, and the crystallized salt exacerbated surface damage as the moisture evaporated in a dry environment.
Investigation of the time-dependent behavior of rock and the associated mechanisms are of key interest in long-term stability analysis of many engineering applications. In this study, creep tests were performed on Daejeon granite samples of 25.4mm diameter under uniaxial compression at varying stress levels. The effect of moisture was investigated by testing both air-dried and fully water-saturated samples. The creep behavior of Daejeon granite exhibited three distinctive stages of primary, secondary and tertiary creep. The ultimate strength of granite under a constant stress decreased considerably with time. Saturation and immersion of the test specimen in water markedly increased the total creep strain as well as the secondary creep rate. The experimental creep curves are fitted to Burger's model as well as two other empirical models suggested by previous researchers. A number of the parameters determined for each model are dependent on stress and influenced by the presence of water. Based on the experimental results, an empirical relation between the applied stress and the time-dependent strain is established separately for each air-dried and fully water-saturated Daejeon granite.
Korean Journal of Agricultural and Forest Meteorology
/
v.18
no.4
/
pp.242-252
/
2016
A process-based ecosystem model, BIOME-BGC, was applied to simulate seasonal and inter-annual dynamics of carbon and water processes for potential evergreen needleleaf forest (ENF) biome in Korea. Two simulation sites, Milyang and Unljin, were selected to reflect warm-and-dry and cool-and-wet climate regimes, where massive diebacks of pines including Pinus densiflora, P. koraiensis and P thunbergii, were observed in 2009 and 2014, respectively. Standard Precipitation Index (SPI) showed periodic drought occurrence at every 5 years or so for both sites. Since mid-2000s, droughts occurred with hotter climate condition. Among many model variables, Cpool (i.e., a temporary carbon pool reserving photosynthetic compounds before allocations for new tissue production) was identified as a useful proxy variable of tree carbon starvation caused by reduction of gross primary production (GPP) and/or increase of maintenance respiration (Rm). Temporal Cpool variation agreed well with timings of pine tree diebacks for both sites. Though water stress was important, winter- and spring-time warmer temperature also played critical roles in reduction of Cpool, especially for the cool-and-wet Uljin. Shallow soil depth intensified the drought effect, which was, however, marginal for soil depth shallower than 0.5 m. Our modeling analysis implicates seasonal drought and warmer climate can intensify vulnerability of ENF dieback in Korea, especially for shallower soils, in which multi-year continued stress is of concern more than short-term episodic stress.
The lateral load which is applied to the pile foundation supporting the superstructure during an earthquake is divided into the inertia force of the upper structure and the kinematic force of the ground. The inertia force and the kinematic force could cause failure to the pile foundation through different complex mechanisms. So it is necessary to predict and evaluate interaction of the ground-pile-structure properly for the seismic design of the foundation. The interaction is affected by the lateral behavior of the structure, the length of the pile, the boundary conditions of the head, and the relative density of the ground. Confining pressure and ground stiffness change accordingly when the relative density changes, and it results that the coefficient of subgrade reaction varies depending on each system. Horizontal bearing behavior and capacity of the pile foundation vary depending on lateral load condition and relative density of the sandy soil. Therefore, the 1g shaking table tests were conducted to confirm the effect of the relative density of the dried sandy soil to dynamic behavior of the group pile supporting the superstructure. The result shows that, as the relative density increases, maximum acceleration of the superstructure and the pile cap increases and decreases respectively, and the slope of the p-y curve of the pile decreases.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.428-428
/
2016
Copper indium sulfide (selenide) (CuIn(S,Se)2,CISSe)는 1.0~1.5 eV의 Direct band gap과 105 cm-1이 넘는 큰 광 흡수 계수를 가지고 있어 박막 태양전지의 흡수층으로써 연구되어 왔다. 최근 대량생산 및 저가 공정에 용이하다는 측면에서 용액 공정 기반 CISSe 태양전지 연구가 크게 주목 받고 있다. 용액공정 기반 중 하이드라진을 사용 한 경우 매우 높은 효율을 기록하였으나, 하이드라진 자체의 유독성과 폭발성 때문에 분위기 제어가 필요하고 여전히 저가화 및 대면적 제작에 한계가 있다. 따라서 알코올 솔젤 기반 CISSe 태양전지 제작 연구가 많이 진행되었으나, 결정립 성장 및 칼코겐 원자를 공급하기 위해 불가피하게 황화/셀렌화 후속 열처리 공정을 요구한다. 후속 열처리 공정은 폭발성의 황화수소/황화셀레늄 기체 분위기 제어와 고가의 장비를 필요로 한다. 본 연구에서는 매우 안정적이며 저가 용매인 물과 아민계 첨가제를 이용하여 Cu, In 전구체와 S, Se 이 포함된 Cu-In-S 잉크와 Se잉크를 제작하였다. 잉크 내에 S, Se을 첨가 함으로써 추가적인 후속공정 없이 비활성 가스 분위기에서 고품질의 CISSe 박막 제작을 가능케 하였다. 또한 Se 잉크 증착 횟수에 따른 결정 구조, 광학적 성질의 차이에 주목하였다. 따라서 수계 잉크를 대기 중에서 스핀코팅으로 박막을 제작한 후, Hot plate에서 건조하여 균일한 박막을 제조하고, 제작된 박막을 tube furnace에서 환원 분위기 및 비활성 가스 분위기에서 열처리 진행하여 $1.3{\mu}m$ 두께의 고품질의 CISSe 흡수층을 제작하였다. 이러한 흡수층에 대해 XRD, SEM, EDS 분석을 진행하여, 결정성, 미세구조, 및 조성을 확인하였으며, 제작된 흡수층 위에 버퍼층/투명전극층을 차례로 증착하여 CISSe 태양전지를 제작하여 셀 성능 및 양자 효율 특성을 파악하였다. 또한 액상 Raman 분석을 통해 결정립 성장 과정 메커니즘을 제시하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.