• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.610-611
• /
• 2001

연안 및 조간대에 서식하고 있는 정착성이거나 이동이 적은 패류들은 조석주기와 분포 등에 의해 일정한 주기로 공기 노출에 직면하고 있으므로 이러한 생물들은 먹이를 섭취하는 시간에 제한을 받으며, 온도의 변화 및 건조에 스트레스를 받고 있다. 공기노출시 패류의 생리적 반응은 종에 따라 다르게 나타나며, 전형적으로 패각을 닫는 형태와 패각을 여는 형태로 나누어지며, 일반적으로 공기에 노출된 후 다시 물에 잠김에 따라 빠르게 대사를 회복시킨다. (중략)

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.218-218
• /
• 2007

• Solar Energy
• /
• v.11 no.3
• /
• pp.9-20
• /
• 1991

Experiments for drying radish were carried out to analyze the drying characteristics and quality evaluation between solar heated-air drying and natural air drying system. Solar heated-air drying system consists of a small fan, a solar air heater and a tunnel dryer. Simulation model for thermal environments of solar collector was developed to investigate the effect of solar radiation and airflow rate on thermal performance.

• Journal of Biosystems Engineering
• /
• v.15 no.4
• /
• pp.339-345
• /
• 1990

공기통풍 건조시 공기흐름(airflow)에 대한 곡물저항(grain resistance)은 송풍시스템에서 fan의 선정시 매우 중요하다. 지금까지는 공기흐름에 대한 곡물저항은 주로 Shedd의 curve에 준하여 정해졌다. 그러나 실제의 경우 곡물수확 또는 건조시 기계적 원인에 의하여 미세립자(fine material)가 생성된다. 이에 본 연구에서 밀(red hard winter wheat)을 대상으로 송풍량, 함수율, 미세립자량이 정압강하(static pressure drop)에 미치는 영향을 규명하였고, 이러한 변수가 포함된 수학적 모델을 개발하였다. 독립변수는 0.051로부터 $0.203m^3/m^2.sec$에 이르는 7단계의 각각 다른 송풍량과 3단계의 함수율 (11, 13, 15%w.b), 4단계의 미세립자량(0, 2, 4, 8%)이고, 종속변수는 정압강하이다. 정압강하와 test bed에서의 송풍량은 micromanometer를 사용하여 측정하였다. 결과는 독립변수(송풍량, 함수율, 미세립자량)는 모두 정압강하에 significant하게 영향을 미치는 것으로 나타났다. 규정된 범위내에서 함수율이 증가함에 따라 정압강하는 최고 45% 까지 감소되었고, 반면 미세립자량이 증가함에 따라 정압강하는 최고 195%까지 증가되었다. 수집된 data로서 다음과 같은 regression equation이 개발되었다($P=AV+BV^2+C(MO)V+D(FM)V$). 본 연구의 결과는 공기송풍시스팀에서 송풍량, 함수율, 미세립자량이 정압강하에 미치는 영향을 규명하였고, 에너지 절약적 송풍시스템을 설계하는 데 도움이 될 수 있을 것이다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.27 no.6
• /
• pp.541-547
• /
• 1998

공기 중에 존재하는 미생물(바이오에어로졸, bio-aerosol)은 많은 질병 발생의 원인이다. 의학계에서는 바이오에어로졸과 공기 매개성 질병의 전파와의 연관성이 잘 알려져 있다. 특히 결핵, 수두, 홍역, 천연두의 발병은 공기를 통한 질병 전파의 중요성을 확인시켜 준다. 그러나 IAQ(indoor air qualify)의 영향은 최근에서야 조사되었다. 보건의료기관과 연구실험실에서는 세균과 진균의 감염이 HVAC 시스템을 통해서 종종 일어난다. 유사한 IAQ연구에서는 바이오에어로졸이 빌딩증후군과 같은 빌딩과 관련된 질병(building-related illness, BRI), 감염, 중독성 증상, 민감성 질병과 1차적으로 연결되어 있음을 발견되었다.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.427-434
• /
• 2007

Indoor air pollution has been a critical issue as a new environmental problem and a significant amount of research has been performed on the indoor air pollution in buildings as well us those in mean of transport such as automobiles, subways, and buses. The actual condition of indoor air pollution in ships, however, was not investigated. Because airtightness of a ship is very higher than a general building and the crew spend almost all the time in indoor space of the ship during underway, indoor air quality(IAQ) of the ship is very important for their comfortableness and health. In this paper, indoor air quality of a new ship is measured and analyzed for the improvement of IAQ in ships.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.188-194
• /
• 2002

버섯의 감압건조시험을 할 수 있는 요인시험장치를 제작하여 시험한 결과를 요약하면 다음과 같다. 가. 댐퍼조절방식 감압건조장치로 건조시험한 결과, 표고버섯은 건조온도 5$0^{\circ}C$에서는 나타나 건조실 압력에 따른 건감률의 변화는 크게 나타나지 않았으나, 건조온도 6$0^{\circ}C$에서 건조실 내부압력이 990hPa일 때 4.57%/hr로 1,013hPa에 비해 높게 나타났으며, 색차면에서는 온도 5$0^{\circ}C$일 때 건조실 내부 압력이 낮아질수록 변화가 적은 것으로 나타났고, 수축률은 압력별로 거의 변화가 없었으나, 건조온도 6$0^{\circ}C$, 압력 990hPa에서 다른 조건에 비해 양호한 것으로 판단되었으나 건조실 내부에 공기분배가 일정하지 않고, 건조실 내부압력 강하성능이 떨어지는 문제점이 발생하여 솔레노이드를 이용한 압력조절방식으로 보완 제작하여 건조시험을 실시하였다. 나. 솔레노이드방식 감압건조장치로 건조시험 한 결과, 표고버섯은 열풍온도 5$0^{\circ}C$, 건조실 내부압력 940-980hPa에서 건감률 2.69%w.b./hr, 갓의 복원률 90.1%로 가장 높았고, 색차 및 수축률이 가장 낮은 것으로 나타났으며, 건조실 내부압력을 900-940hPa로 고정하고 열풍온도를 40, 50, 6$0^{\circ}C$로 표고버섯을 시험한 결과 건감률은 6$0^{\circ}C$일 때 가장 높았으나, 색차, 수축률, 복원률을 고려할 경우 열풍온도 5$0^{\circ}C$가 가장 적합한 것으로 판단된다. 다 솔레노이드방식 감압건조장치로 건조한 표고버섯으로 품위에 대한 유의성 검증결과, 표고버섯의 경우 온도별로는 색택과 복원률, 건조실 내부 압력별로는 수축률, 복원률에서 유의차가 있는 것으로 나타났다. 라. 본 연구에서 구명된 감압건조특성을 기초로 하여 배치식 감압건조기를 설계 제작에 활용하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2369-2379
• /
• 2013

The Soil-Water Characteristics Curve (SWCC) is affected by the initial density of soil under unsaturated condition. Also, the characteristic of hydraulic conductivity is changed by the initial density of soil. To study the effect of initial density of unsaturated soil, SWCC and the Hydraulic Conductivity Function (HCF) of Jumoonjin sand with various relative densities, 40%, 60% and 75% were measured in both drying and wetting processes. As the results of SWCC estimated by van Genuchten (1980) model, the parameter related to Air Entry Value(AEV), ${\alpha}$ in the wetting process is larger than that in drying process, but the parameters related to the SWCC slope, n and the residual water content, m are larger than those in wetting process. The AEV is increased or Water Entry Value (WEV) is decreased with increasing the relative density of sand. The AEV is larger than the WEV at the same relative density of sand. As the results of HCF estimated by van Genuchten (1980) model which is one of the parameter estimation methods, the unsaturated hydraulic conductivity maintained at a saturated one in the low level of matric suctions and then suddenly decreased just before the AEV or the WEV. The saturated hydraulic conductivity in drying process is larger than that in wetting process. The saturated hydraulic conductivity is decreased with increasing the relative density of sand in both drying and wetting processes. Also, the hysteresis in unsaturated HCFs between drying and wetting process was occurred like the hysteresis in SWCCs. According to the test results, the AEV on SWCC is decreased and the saturated hydraulic conductivity is increased with increasing the initial density. It means that SWCC and HCF are affected by the initial density in the unsaturated soil.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.166-179
• /
• 1999

Apical sealing is essential for the success of surgical endodontic treatment. Root-end cavity is apt to be contaminated with moisture or blood, and is not always easy to be dried completely. The purpose of this study was to evaluate the influence of dry methods of retrocavity on the apical seal in endodontic surgery. Apical seal was investigated through the evaluation of apical leakage and adaptation of filling material over the cavity wall. To investigate the influence of various dry methods on the apical leakage, 125 palatal roots of extracted human maxillary molar teeth were used. The clinical crown of each tooth was removed at 10 mm from the root apex using a slow-speed diamond saw and water spray. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. After removing of the coronal 2 mm of filling material, the access cavities were closed with Cavit$^{(R)}$. Two coats of nail polish were applied to the external surface of each root. Apical three millimeters of each root was resected perpendicular to the long axis of the root with a diamond saw. Class I retrograde cavities were prepared with ultrasonic instruments. Retrocavities were washed with physiologic saline solution and dried with various methods or contaminated with human blood. Retrocavities were filled either with IRM, Super EBA or composite resin. All the specimens were immersed in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using one-way ANOVA and Duncan's Multiple Range Test. To evaluate the influence of various dry methods on the adaptation of filling material over the cavity wall, 12 palatal roots of extracted human maxillary molar teeth were used. After all the roots were prepared and filled, and retrograde cavities were made and filled as above, roots were sectioned longitudinally. Filling-dentin interface of cut surfaces were examined by scanning electron microscope. The results were as follows: 1. Cavities dried with paper point or compressed air showed less leakage than those dried with cotton pellet in Super EBA filled cavity (p<0.05). However, there was no difference between paper point- and compressed air-dried cavities. 2. When cavities were dried with compressed air, dentin-bonded composite resin-filled cavities showed less apical leakage than IRM- or Super EBA-filled ones (p<0.05). 3. Regardless of the filling material, cavities contaminated with human blood showed significantly more apical leakage than those dried with compressed air after saline irrigation (p<0.05). 4. Outer half of the cavity showed larger dentin-filling interface gap than inner half did when cavities were filled with IRM or Super EBA. 5. In all the filling material groups, cavities contaminated with blood or dried with cotton pellets only showed larger defects at the base of the cavity than ones dried with paper points or compressed air.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.706-713
• /
• 2001

The influencing factor in drying characteristics of fluidized bed drying with different drying conditions for husked barley were carried out. This fluidized drying mechanism of husked barley was consisted of consecutive two falling rate parts, first falling rate period and second falling rate period without showing constant rate period. The drying rate constant was increased with decreasing charged amount and relative humidity and increasing air temperature and air velocity. Since the drying rate constant expressed by Arrhenius type equation in the falling rate period showed good linearity, the falling rate period was condsidered as the controlling step. The activation energy of first falling step was 1,100 cal/gmol, while for second falling step the values showed 1,600 cal/gmol.