Proceedings of the Materials Research Society of Korea Conference
/
2012.05a
/
pp.108.1-108.1
/
2012
높은 균일도의 대면적 OLED 조명을 만들기 위해서는 보조배선이 필요하다. 이 때 보조배선이 노출되면 보조배선에서 발생하는 누설전류로 인하여 디바이스가 효율적으로 구동이 되지 않는다. 그래서 누설전류를 막기 위하여 절연층을 사용하게 된다. 본 연구에서는 그라비아 오프셋 프린팅 방식으로 절연층을 형성 하였다. 그라비아 오프셋 프린팅 방식은 포토리소그래피 공법에 비해 공정이 간단하여 제작비용이 낮아지고, 친환경적인 이점이 있다. 절연층 재료로는 PVP 유기 절연체를 사용하였다. 이 PVP 유기 절연체는 PVP Poly-4-vinylphenol, Propylene glycol monomethyl ether acetate, 그리고 Poly(melamineco-formaldehyde) metylate 재료들을 적절한 비율로 혼합하여 제작하였다. 제작된 용액은 최대 1840cps의 점도를 가지고 있다. 이 PVP용액으로 인쇄 테스트를 진행하였다. 일반적으로 그라비아 오프셋 프린팅 방식에서는 고점도 재료가 사용되지만, 이 PVP용액은 낮은 점도에서도 프린팅이 잘 되는 것을 확인 할 수 있었다. 재료의 열처리는 $100^{\circ}C$에서 10분 건조 후 $200^{\circ}C$에서 15분의 큐어링을 진행하였다. 인쇄에 사용한 패턴의 선폭은 50um~100um로 구현하였으며, 약 120cps의 점도에서 선폭 및 해상도가 패턴과 가장 유사하게 나타났다. 인쇄 후의 절연층은 최종적으로 약 1um의 두께와 낮은 접촉각을 형성하였다. 누설전류는 전압 20V인가시 0.12pA/$cm^2$의 값을 가진다. 이 결과는 동일 두께의 스핀코팅과 비슷하였다. 우리는 이 결과값을 토대로 보조배선과 PVP 유기 절연층을 그라비아 오프셋 프린팅 방식으로 인쇄 한 OLED 조명을 제작하였다.
Journal of the Microelectronics and Packaging Society
/
v.19
no.1
/
pp.67-73
/
2012
After flash memory card(FMC) was manufactured by $B^2it$ process, interfacial reaction of silver bump with thermal stress was studied. To investigate bonding reliability of Ag bump, thermal shock and thermal stress tests were conducted and then examined on the crack between Cu land and Ag bump interface. Diffusion reaction of Ag bump/Cu land interface was analyzed using SEM, EDS and FIB. The Ag-Cu alloy layer due to the interfacial reaction was formed at the Ag/Cu interface. As the diffusivity of Ag ${\rightarrow}$ Cu is faster than Cu ${\rightarrow}$ Ag, a lot of (Cu, Ag) alloy layers were observed at the Cu layer than Ag. These alloy layers contributed to increase the Cu-Ag bonding strength and its reliability.
Dimension stability was examined after PEG pretreatment and post freeze-drying treatment in order to determine the PEG(#3350) concentration and solvent for pre-treatment of freeze-drying of highly-degraded waterlogged ash woods(Fraxinus spp.; ca. 5,700 BP) excavated from peat lands at Pyungtack, Kyounggi-do. At the low concentration (<30-40%) of PEG soaking in both water and t-butanol, the weight increases abruptly, but at high concentration (>50%) gradually, consequently, taking longer treatment time. PEG loading was higher in t-butanol solution than in water. However, the best dimesional stability was obtained from freeze-drying after lower PEG solution (40% in water) soaking. Low dimensional stability, found in the samples treated with higher PEG solutions (60%-70% in t-butanol), might come from incomplete freezing and excess PEG absorbing moisture. The samples air-dried after 70% PEG treatment had collapse defects. In conclusion, the use of low concentration (about 40% in water) PEG solution was the most suitable pretreatment for freeze drying of highly-degraded waterlogged ash woods.
Gulbis were made of raw Pseudosciaena manchurica by different salting methods and drying conditions. During the Gulbi processing, the contents of trimethylamine(TMA), dimethylamine(DMA) and formaldehyde(FA) were chemically analyzed and the distribution of fat was microscopically observed. The contents of TMA, DMA and FA in raw sample were 0.9mg, 3.19mg and 0.19mg per 100g, respectively. The TMA contents in Gulbi were rapidly increased to 24.82-76.32mg during drying, while the DMA contents in Gulbi were slowly increased and FA contents in Gulbi remained nearly unchanged. These changes were not influenced by the kinds of salt and salting methods. The formation rates of TMA and DMA were twice faster dried by the controlled condition than the natural condition. The fat in muscle moved to the skin layer through connective tissue with the laps of drying time. The extent of fat shifting was smaller salted by purified salt than by bay salt. The muscle tissue of Gulbi dried by the controlled condition had clearer spaces between white muscles than that of the natural condition. The muscle tissue of Gulbi salted with purified salt exsisted orderly, while the sample salted with bay salt was clumped.
Journal of the Korean association of regional geographers
/
v.17
no.2
/
pp.141-149
/
2011
The formation of Sajapyeong Alpine Wetland was influenced by factors of drainage basin and its geology, and fire-shifting cultivation. Sajapycong drainage basin had a narrow outlet, Sijeon-cheon in it flowed relatively slowly. Bedrock in basin was weak to mechanical weathering, many rock detritus were, produced. Deforestation for reclamation using fire accelerated topsoil loss. Thus much sediments was supplied to Sijeon-cheon and deposited in the channel bed, and wetland was formed on channel marginal footslope. In Sajapyeong moor were Gullies formed along road. Because they blocked sediments and throughflow transferring into moor, moor became dry land. In order to prevent this drying, we have, to raise water level of a drain ditch to level of weathered bedrock to transfer throughflow into moor, modify the shape of ditch to be naturally irregular, and construct large boulders step on the Sijeon-cheon bed to prevent from lowering of its bed.
Transactions of the Korean Society of Mechanical Engineers A
/
v.30
no.6
s.249
/
pp.734-740
/
2006
The purpose of this study is to develop and commercialize a paddle-type fluidized dryer. The drying system used in this study, was designed to attach a paddle-type fluidized mixer to a dryer. The drying system is based on the drying method to generate thermal contacts, as fluidized layers are generated due to a paddle mechanism. Accordingly, the time of drying is short and material damage is very little. Also, the drying system operates as a closer system so it can be utilized not only for food and chemical materials, but also for environmental pollution materials. According to its performance test, the drying system is possible to dry low-moisture contents and its drying performance is outstanding. In conclusion, the drying system designed for this study, is likely to have great potential for commercialization.
Hysteresis is a common feature exhibited in hydraulic properties of an unsaturated soil. This study focuses on hysteresis observed in a compacted weathered granite subgrade soils based on the pressure plate laboratory tests. It was found that the Soil-Water Characteristics Curve of a soil is hysteretic and unique. The results also show that the wetting and drying curves predicted using the Fredlund and Xing model is quite close to the laboratory-measured results. For a specific matric suction, water content or coefficient of permeability on a wetting curve is always lower than those found on a drying curve.
Korean dried noodles were prepared from 6 different types of Australian wheats and tested for their cooking property and sensory quality. The flours from different wheat types were characterized by the fractionation of starch and gluten. The flow property of fractionated starch and flour suspensions were determined. The protein content of flour influenced many aspects of dried noodle quality. The Cooking rate decreased as the protein content increased. The higher protein content resulted in the higher of shear extrusion force, and lower grade of appearence of cooked noodle. The flours containing about 10% protein, i.e. Australian standard White flours, were appeared to be most adequate to make Korean dried noodle.
Journal of Korean Association for Spatial Structures
/
v.10
no.1
/
pp.75-84
/
2010
According to the available study and experimental data about the long term behavior of CFT(Concrete Filled Tube) columns, the creep and of concrete in CFT columns are smaller than those of RC columns because of the confinement effect of outer steel columns. In this study, the uncertainties associated with assumed values for concrete properties such as strength, creep coefficients, and service load have been considered and analyzed for the prediction of time-dependent column shortening of CFT column. The CFT column shortening analysis using Monte Carlo method is proposed and an of a 37 story tall building with CFT columns is studied for illustration. According to the results obtained by the probability analysis with multi parameters, the effect of variation coefficient for 3 parameters is investigated considering confidence interval.
Journal of the Korea Academia-Industrial cooperation Society
/
v.9
no.6
/
pp.1739-1744
/
2008
Non-toxic orgarnic inorgarnic complex green pigment using Fluidized Bed Vapor Deposition(FB-VD) process was developed to alternate green pigment used heavy metals chrome and lead in present domestic. Kaolin materials and $CaCO_3$ were used as supporter of pigment and surface and compositions of supporters were characterized by SEM and EDXS, respectively. Various kind of surface active agents(surfactants) were also used to optimize the dry condition or color revelation. Results showed that anion type surfactant is most suitable for dry and color revelation of pigment.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.