• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.05a
• /
• pp.287-290
• /
• 2004

매년 수입닭고기 국내 유통량의 증가에 따른 국내산과 수입산의 외형적인 색도 차이를 분석하고자 국내산 신선육과 국내산 냉동 닭고기, 수입산 냉동 닭고기의 뼈 및 근육 가죽의 색도 차이를 분석하였다. 국내산의 신선닭다리 뼈의 명도 L 값은 56.04로 밝은 반면 냉동상태인 수입닭 뼈는 40.34 및 국내산 냉동은 38.58로서 명도값이 떨어졌다(P<0.05). 적색도 a 값도 국내산 신선닭의 2.81로서 월등히 낮은 값을 보였다(p<0.05). 수입 닭고기 다리뼈의 단면 색은, 국내산 냉동 뼈의 명도값이 37.50으로 가장 높게 나타났으며, 신선 닭고기와과 미국산 냉동육 뼈 단면의 명도 값은 낮게 나타났다(P<0.05). 적색도 a 값은과 황색도 b 값에서도 차이를 보이지 않았다. 닭다리 근육의 명도값은 국내산과 수입육간에 차이를 보이지 않았으나, 적색도 a 값은 국내산 신선육이 6.99로서 수입 냉동육 9.72 및 국내산 냉동 11.31 보다 훨씬 낮게 나타났다(P<0.05). 황색도 b 값에서도 국내산 신선육이 12.76으로 낮았다. 수입 닭고기는 일반적으로 냉동상태로 수입 및 유통되기 때문에 장시간 냉동에 의해 약간 검붉은 빛깔을 띠며, 광택이 없지만, 국내산 닭고기는 신선냉장상태로 유통되기 때문에 육색이 밝고 광택이 있어 보인다. 특히, 수입 닭고기 중 미국산 다리부위는 정육이 아닌 주로 뼈가 포함된 닭다리 형태로 비닐말이에 종이박스로 포장되어 수입되는 실정으로 장기간 냉동으로 건조가 될 뿐만 아니라 냉동과정 중, 뼈속에 잔류하는 혈액성분이 남아있어 일반적으로 수입닭고기는 검붉게 보이는 특성이 있다. 이러한 뼈와 근육 및 가죽에 의한 색도의 차이에 따른 특성으로 국내산과 수입산의 외형상의 차이가 있는 것으로 나타났다.rhamnose의 생합성 과정을 예상할 수 있었다.되어 있는 양 정도의 콜레스테롤을 추가적으로 보상시킬 수 있다고 하는데, 이는 달걀 이외의 음식물에서도 섭취되는 콜레스테롤 양을 감안할 때 하루 총 1,000~1,500mg에 해당하는 양이다. 뿐만 아니라 이중 일부 사람들은 일반적인 식단 하에서 6개의 달걀을 추가하여 섭취하여도 혈중 콜레스테롤 수준이 높아지지 않는다고 한다. 여러 나라에서 아직도 일률적으로 권장되는, 음식물을 통한 일당 콜레스테롤 섭취량을 최고 300mg으로 제한해야 한다는 것은 건강인에 있어서는 앞에서 언급한 바와 같은 생리적인 피이드-백 기작으로 말미암아 혈중 콜레스테롤 수준을 저하시키지 못하거나 미미한 정도에 불과하다. 혈중 콜레스테롤 수준이 정상적인 범위인 180~240 mg/dl에 해당하는 대부분의 건강인에게도 콜레스테롤이 많이 함유된 달걀이나 기타 축산물을 이용한 식품의 지속적인 섭취를 적극 피하도록 권장하는 것은 국민보건상 별로 큰 위미가 없다고 생각한다. 왜냐하면 이로 말미암아 국민 건강상 문제점이 크게 향상되었다는 연구보고는 아직 발견되지 않고 있기 때문이다. 더욱이 동물성 콜레스테롤 다량 함유식품인 달걀, 우유, 유제품 및 육류 등의 섭취를 꺼리게 되면 이들 식품들이 영양생리학상 매우 중요한 양질의 영양소를 많이 함유하고 있기 때문에 여러 중요한 필수 영양소의 공급상태를 뚜렷히 감소시키게 된다. 병적으로 혈중 콜레스테롤의 수준이 높은 사람은 관상성 심장병의 발병 내지는 심장경색에 의한 사망에 대한 통계학적 위험성이 증가된다. 고콜레스테롤 혈증(청, 중년층의 경우 260mg /dl 이상) 환자중 많은 사람들은 대부분 음식물을 통한 다량의 콜레스테롤 섭취에 의해 혈중 콜레스테롤 수준이 높아진 것이 아니고

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.199-206
• /
• 2017

A geological repository for the disposal of high-level radioactive waste is generally constructed in host rock at depths of 500~1,000 meters below the ground surface. A geological repository system consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer is indispensable to assure the disposal safety of high-level radioactive waste, and it can restrain the release of radionuclides and protect the canister from the inflow of groundwater. Since high temperature in a disposal canister is released to the surrounding buffer material, the thermal properties of the buffer material are very important in determining the entire disposal safety. Even though there have been many studies on thermal conductivity, there have been only few studies that have investigates the specific heat capacity of the bentonite buffer. Therefore, this paper presents a specific heat capacity prediction model for compacted Gyeongju bentonite buffer material, which is a Ca-bentonite produced in Korea. Specific heat capacity of the compacted bentonite buffer was measured using a dual probe method according to various degrees of saturation and dry density. A regression model to predict the specific heat capacity of the compacted bentonite buffer was suggested and fitted using 33 sets of data obtained by the dual probe method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.413-416
• /
• 2008

The concrete used most in construction materials. There is an overcrowded iron dimensions use of the concrete at time of the other concrete theory on the reinforcing rod back which did congestion and compares it with this, and there are more few dimensions of the aggregate than concrete, and quantity of aggregate passage is superior in mortar than concrete. If a volume rate of the aggregate writes mortar than concrete against this, therefore, unit amount increases, and quantity of paste increases and quantity of dry shrinkage than increase concrete. However, I let I regulate lay priest distribution of the aggregate, and the results rates increase and reduce unit amount and decrease quantity of dry shrinkage, and separation resistance and the gap passage characteristics are judged because it can be it in a substitute document of very superior concrete. I came to carry out the study that I watched to let I was useful a little more and do the improvement repair of a become building wall body, a basement pillar and repair reinforcement of the assistant in the reinforcing rod back, the old age when I made congestion here. I regulated lay priest distribution of the aggregate in the study and regulated substitution rate of the aggregate (40%, 50%, 60%) and divided W/C 30%, 40% standards and produced mortar and I compared quantity of air by this, slump, compression robbery and showed it this time.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.277-282
• /
• 2015

This study is conducted to utilize waste concrete powder (WCP) made as a by-product manufacturing high quality recycled aggregate. The blaine fineness of the used waste concrete powder was $928cm^2/g$. As the main characteristic of waste concrete powder, it showed an angular type similar to cement, but hydrated products were attached on the surface of particles. In addition, the size of the particles of waste concrete powder was larger than OPC and in terms of chemical components it had higher $SiO_2$ contents. For using WCP in soil cement-based pavement, the qualities, physical and chemical properties, of WCP should be researched. In the first step, the specified compressive strength of mortar for two types of clay sand soil and clay soil respectively was experimented to be 15 MPa and then optimum mixing ratio of chemical solidification agent were decided in the range of 1.5 - 3.0% in the replacement with cement weight content. In the second step, based on the prior experimental results, recycling possibility of WCP in soil cement-based pavement was studied. In the result of experiment the mixing ratio of WCP were 5, 10, 15 and 20% in the replacement with soil weight and the compressive strength of mortar was somewhat decreased according to the increase of the mixing ratio of WCP.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.369-376
• /
• 1986

Diosgenin in an Indonesian Costus speciosus was determined by capillary gas-liquid chromatography (GLC). The experimental conditions for the hydrolysis, extraction and acetylation of the diosgenin, and the determination by GLC were investigated. 0.20g of dried sample powder was refluxed in the solution of 3N HCI and xylene at 95∼100${\circ}C$ for 4 hours and the xylene layer was separated. The residue evaporated the xylene was refluxed in 20 : 80 acetic anhydride-pyridine for 30 minutes and the diosgenin acetate was extracted with diethyl ether. Dehydrated with anhydrous $Na_2SO_4$ and evaporated the ether, the residue was dissolved in 5.00ml of n-hexane and injected into GLC. Capillary column of SE-30 25m ${\times}$ 0. 33mm was installed in GLC and the column temperature was increased from 180${\circ}$ to 270${\circ}C$ at rate of 10${\circ}C$/min. The flow rate of carrier gas $N_2$ was 2ml/min and FID was used to detect. The analytical result of the diosgenin was 0.281% and relative standard deviation of 5 measures was 1.8%.

• Journal of the Korean Geographical Society
• /
• v.42 no.6
• /
• pp.863-878
• /
• 2007

The time-spatial distribution of Scrub typhus and its relationship with environmental ecology, such as climate, and habitat change are analyzed in respect of the geography of disease. Scrub typhus was firstly reported in 1951, and reemerged in 1986 mainly in southwestern Korea. later it has sharply increased and spreaded out toward whole country in 1998 and 2004, except mid-eastern mountainous region. Hwasung City is the typical example of sudden upsurge of Scrub typhus. High incidence of Scrub typhus patients might due to elevated temperature and decreased precipitation during the summer, as well as milder autumn. Sharp increase of Scrub typhus patients at rural area since 1980's might also be the result of the rapid changes of land use pattern, which eventually have contributed for the active development of dense vegetation and propagation of chigger mites around cultivated land.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.7
• /
• pp.55-64
• /
• 2017

A geological repository has been considered one of the most adequate options for the disposal of high-level radioactive waste. A geological repository will be constructed in a host rock at a depth of 500~1,000 meters below the ground surface. The geological repository system consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer is very important to assure the disposal safety of high-level radioactive waste. It can restrain the release of radionuclide and protect the canister from the inflow of groundwater. High temperature in a disposal canister is released into the surrounding buffer material, and thus the thermal transfer behavior of the buffer material is very important to analyze the entire disposal safety. Therefore, this paper presents a thermal conductivity prediction model for the Kyungju compacted bentonite buffer material which is the only bentonite produced in Korea. Thermal conductivity of Kyungju bentonite was measured using a hot wire method according to various water contents and dry densities. With 39 data obtained by the hot wire method, a regression model to predict the thermal conductivity of Kyungju bentonite was suggested.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.909-915
• /
• 2003

Anodic oxide films on aluminum play an important role as a dielectrics in aluminum electrolytic capacitor. In order to obtain the high capacitance, ZrO$_2$ films were coated on aluminum foils by sol-gel method and then, the properties of anodized films were studied. The coating and drying of the films were repeated 4-10 times and annealed at 300～$600^{\circ}C$ and the triple layer of ZrO$_2$/Al-ZrO$_{x}$ /Al$_2$O$_3$ was formed onto aluminum substrates after anodizing of ZrO$_2$/Al film. The thickness of $Al_2$O$_3$ layer was decreased with increasing the annealing temperature due to the densification of ZrO$_2$ film. The ZrO$_2$ films were crystallized even at 30$0^{\circ}C$ and showed nanocrystalline structure. The. capacitance of aluminum foil annealed at low temperature was higher than that at high temperature. The increase of capacitance was due to the high capacitance of ZrO$_2$ film annealed at low temperature. The capacitance of ZrO$_2$ coated aluminum increased about 3 times compared to that without a ZrO$_2$ layer after anodizing to 400 V. From these results, the aluminum foils with composite oxide layers are found to be applicable to the aluminum electrolytic capacitor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7667-7671
• /
• 2015

Recently, Zinc coating is often used with environment friendly features and high performance. Generally The coating temperature is one of main factors for determining coating thickness and coating ability, so the optimal coating temperature is strongly required. In this paper, the thermo-flow simulation considering the air flow inside the coating rooms for analyzing the temperature distributions of Zinc spray coating room was performed. Two spray coating rooms, preheating room and drying room were all modeled by SolidWorks program and the temperature distributions were analyzed by Flow simulation program. The analysis results were verified with the measured data by thermal image camera. The characteristics of temperature distributions of the first spray room and the second spray room were understood and the results showed that the temperatures of two spray coating room were low compared with the target temperature $25^{\circ}C$. To the exclusion of heater addition, the simulation with all the same conditions exclusive the exhaust fan was performed, which showed that the temperatures of the first and the second spray rooms increased by $6.2^{\circ}C$ and $5.8^{\circ}C$. This analysis can be applicable for designing a new spray coating room for improving performance.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.36-42
• /
• 2020

In the present study, gravity separation of speiss (6.74 g/㎤) and limestone (2.7 g/㎤) was investigated using a vibrating 1 mm-zirconia ball (5.6 g/㎤) bed as a medium. The floating ratio and separation efficiency with increasing the number of spiess and limestone granules were examined by changing the vibration frequency from 18 Hz to 26 Hz. During the vibration, the zirconia balls circulate inside the vessel, and the spiess granules sink with the zirconia balls, but limestone granules remain on the surface of the zirconia ball bed. As the number of particles of spiess and limestone granules increased, it was observed that the granules were congested in the path of the granule sinking, so the rate of particle sinking decreased, and that limestone granules overlapping with the spiess granule also sunk. Therefore, the separation efficiency decreases with increasing the number of granules, but when the vibrational frequency increases, there is no more congestion and the separation efficiency increases. When each of the three particles was added, a separation efficiency of 100% was acheived at 22 Hz, which indicates that a dry gravity separation process that does not require a drying process is possible.