• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.355-362
• /
• 2012

Remaining useful life(RUL) prediction of a system is important in the prognostics field since it is directly linked with safety and maintenance scheduling. In the physics-based prognostics, accurately estimated model parameters can predict the remaining useful life exactly. It, however, is not a simple task to estimate the model parameters because most real system have multivariate model parameters, also they are correlated each other. This paper presents representative methods to estimate model parameters in the physics-based prognostics and discusses the difference between three methods; the particle filter method(PF), the overall Bayesian method(OBM), and the sequential Bayesian method(SBM). The three methods are based on the same theoretical background, the Bayesian estimation technique, but the methods are distinguished from each other in the sampling methods or uncertainty analysis process. Therefore, a simple physical model as an easy task and the Paris model for crack growth problem are used to discuss the difference between the three methods, and the performance of each method evaluated by using established prognostics metrics is compared.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.615-632
• /
• 2008

The bridge health monitoring has become an important research topic in conjunction with damage assessment and safety evaluation of structures owing to the improvement of structural modeling techniques incorporating response measurements and the advancements in signal analysis and information processing capabilities. The bridge monitoring systems are generally composed of hardwares such as sensors, data acquisition equipment, data transmission systems, etc, and softwares such as signal processing, damage assessment, display and management, etc. In this paper, the research and development(R&D) activities on the information processing for structural health monitoring of bridges are reviewed. After a brief introduction to the process of bridge health monitoring, various information processing techniques including various signal processing and damage detection algorithms are introduced in detail. Several challenges addressing critical issues in the current bridge health monitoring system and future R&D activities are discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.218-226
• /
• 2020

An experimental study was conducted on baseline model updating and damage estimation techniques for the health monitoring of offshore wind turbine tripod substructures. First, a procedure for substructure health monitoring was proposed. An initial baseline model for a scaled model of a tripod substructure was established. A baseline model was updated based on the natural frequencies and the mode shapes measured in the healthy state. A training pattern was then generated using the updated baseline model, and the damage was estimated by inputting the modal parameters measured in the damaged state into the trained neural network. The baseline model could be updated reasonably using the effective fixity model. The damage tests were performed, and the damage locations could be estimated reasonably. In addition, the estimated damage severity also increased as the actual damage severity increased. On the other hand, when the damage severity was relatively small, the corresponding damage location was detected, but it was more difficult to identify than the other cases. Further studies on small damage estimation and stiffness reduction quantification will be needed before the presented method can be used effectively for the health monitoring of tripod substructures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.10
• /
• pp.717-727
• /
• 2022

An algorithm is realized for estimating the component fault and health diagnosis such as a deterioration. Based on the turbofan engine health diagnosis model, from the health parameters which are estimated by a real time tracking filter, the outliers are eliminated efficiently by an effective median filter to minimize an false alarm. The difference between the fault and deterioration trends is identified by the detection measure for abrupt change, thereby the clear diagnosis classifying the fault and the health condition is possible. The effectiveness of the algorithm for fault and health diagnosis is verified from the simulated results of engine component faults and deterioration.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.311-320
• /
• 2021

A study is performed for the real time fault diagnosis during operation and health estimation relating to performance deterioration in a turbojet engine used for an unmanned air vehicle. For this study the real time dynamic model is derived from the transient thermodynamic gas path analysis. For real fault conditions which are manipulated for the simulation, the detection techniques are applied such as Kalman filter and probabilistic decision-making approach based on statistical hypothesis test. Thereby the effectiveness is verified by showing good fault detection and isolation performances. For the health estimation with measurement parameters, it shows using an assumed performance degradation that the method by adaptive Kalman filter is feasible in practice for a condition based diagnosis and maintenance.

• The Korean Journal of Financial Management
• /
• v.14 no.3
• /
• pp.263-287
• /
• 1997

본 연구에서는 국내은행의 위험도가 반영된 보험요율을 Merton에 의해 처음으로 제시된 예금보험요율 결정모형을 이용하여 추정하였다. 실증분석 결과에 의하면 표본은행간의 예금보험요율의 추정치에는 횡단면적 차이가 있는 것으로 나타나 표본기간 중 여러 은행들이 공격적 경영을 취함으로써 은행파산의 위험도를 높이는 도덕적 위해의 문제를 발생시켰음을 보여주고 있다. 본 연구는 상관관계 분석을 통하여 추정된 보험요율이 Moody's사의 국내은행에 대한 장기신용등급과 재무건전도등급, 그리고 은행규모, 수익성, 자본적정성, 자산건전성을 나타내는 지표들과 어떠한 관계에 있는 지를 살펴보았다. 분석결과에 의하면 Moody's사의 국내은행에 대한 장기신용등급, 재무건전도등급과 보험요율 사이에는 통계적으로 유의한 관계가 있는 것으로 나타나 추정된 보험요율이 이들 지표와 마찬가지로 위험도를 적절히 반영하는 것으로 나타났다. 또한 보험요율은 은행규모, ROA, ROE들과는 음의 관계가 있는 것으로 나타났으나, BIS기준 자기자본비율, 부실여신비율과는 양의 관계가 있는 것으로 나타났다. 그러나 자기자본비율이나 부실여신비율이 은행의 신용도나 위험도를 적절하게 반영하지 못하는 것으로 나타남으로써 이들 비율에 대한 회계방식의 개선이 요구됨을 본 연구의 결과는 보여주고 있다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.460-465
• /
• 2016

Long pipe structures are usually installed in fixtures located with regular intervals or laid underground. Therefore, deflection and deformation could easily occur due to their weight or ground activity. A shape monitoring technique can be used effectively to evaluate the integrity of the pipe structures. Fiber Bragg grating (FBG) sensors, which have an advantage of multiplexing could be used to measure strains at multiple-points of a long structure. In this study, to evaluate the integrity of a pipeline, a shape estimation technique based on strain information was proposed. Furthermore, different experiments were conducted to verify the performance of the proposed technique. Thus, the proposed shape estimation technique can represent the shape according to the deformation of the specimen using the FBGs. Moreover, calculated deflection of the pipeline using the estimation technique showed a good agreement with the actual deflection of the pipeline.

• Computational Structural Engineering
• /
• v.16 no.1
• /
• pp.7-14
• /
• 2003

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.727-730
• /
• 2023

The operation of electric automatic windows is used in harsh environments, and the energy density decreases as charging and discharging are repeated, and as soundness deteriorates due to damage to the internal separator, the vehicle's mileage decreases and the charging speed slows down, so about 5 to 10 Batteries that have been used for about a year are classified as waste batteries, and for this reason, as the risk of battery fire and explosion increases, it is essential to diagnose batteries and estimate SOH. Estimation of current battery SOH is a very important content, and it evaluates the state of the battery by measuring the time, temperature, and voltage required while repeatedly charging and discharging the battery. There are disadvantages. In this paper, measurement of discharge capacity (C-rate) using a waste battery of a Tesla car in order to predict SOH estimation of a lithium-ion battery. A Support Vector Machine (SVM), one of the machine models, was applied using the data measured from the waste battery.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.527-533
• /
• 2013

This paper presents damage detection and estimation of stiffness parameter on a concrete scale model and a real structure of concrete pontoon using dynamic properties such as mode shapes and natural frequencies. In case of damage detection, dynamic impact test on a concrete scale model is accomplished to extract mode shapes and the practicality is verified by utilizing a damage detection technique. And the stiffness parameter of a real structure of concrete pontoon was estimated via system identification technique using the natural frequencies of the structure. The results indicate that the damaged elements of the scale model are found exactly using damage detection technique and the effective stiffness property of the real structure of concrete pontoon can be estimated by system identification technique.