• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.284-295
• /
• 1999

The purpose of this study was to measure and analyze the bond strength of bonded amalgam using dental adhesives and to compare this with light-curing composite resin. Sections 8mm in diameter were punched out from the labial surface of bovine anterior teeth. These were embedded in clear acrylic resin blocks with labial surface facing out. 55 specimens were made for enamel and dentin each. After dividing these into 5 groups, group 1: Superbond C&B, group 2: Panavia 21, group 3: All-Bond 2, group 4: Fuji I Glass Ionomer Luting Cement, group 5: Scotchbond Multi-Purpose(Restorative Z-100), molds with holes of 6.3mm in diameter and 1.5mm in depth were placed over the specimens. The exposed tooth surfaces were treated with adhesives and the molds were filled with amalgam. In group 5, the mold was filled with composite resin and light-cured for 40 seconds. The author measured all specimens for bond strength 24 hours after amalgam filing and analyzed fracture surfaces. The following results were obtained: 1. Among the dentin groups, groups 1, 2 and 4 showed significantly lower bond strength compared with group 5(P<0.05). 2. Among the enamel groups, group 4 showed significantly lower bond strength compared with group 5(P<0.05). 3. In group 2, 2D showed significantly lower bond strength compared with group 2E(P<0.05). Other adhesives showed no such differences in bond strength between dentin and enamel(P>0.05). 4. Cohesive failure was observed in groups 1E and 5D, while mixed failure was seen in groups 1 and 5. Only adhesive failures were noted in groups 2, 3, 4.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.359-369
• /
• 2007

This in vitro study was performed to assess the effect of surface sealing on the microleakage of class V composite resin restorations that underwent several aging treatments. Class V cavities were prepared on the buccal surface of 100 sound extracted premolars and restored with a hybrid light-cured composite resin according to the manufacturer's instructions. They were randomly divided into two groups consisting of 50 samples: group I, without surface sealing, and group II, in which margins were etched and surface sealant was applied. After thermocycling, each group was divided into five subgroups, respectively, to represent the five aging treatments: group A = no further treatment (only thermocycling), B = toothbrushing, C = load cycling, D = toothbrushing followed by load cycling, and E = aging treatment in deionized water for six months. Microleakage was assessed by examining the penetration of 2% methylene blue dye. The following results were obtained: 1. At occlusal and cervical margins in groups without surface sealing, there was no significant difference in microleakage after the several aging treatments (p>0.05). 2. The occlusal margins of groups with surface sealing showed no significant differences after the several aging treatments (p>0.05). 3. In the cervical margins of groups with surface sealing, microleakage significantly increased after load cycling or aging in deionized water for six months (p<0.05). 4. The no-further-treatment group and the toothbrushing group with surface sealing showed less microleakage than the corresponding groups without surface sealing (p<0.05). 5. The surface-sealed groups with load cycling or aging in deionized water showed no significant difference in microleakage to the corresponding groups without surface sealing (p>0.05). In conclusion, the results of this study suggest that the surface sealant infiltrating through the gap of the cervical margin exerted a positive effect on microleakage at the initial stage, but the effect was not sufficient to overcome the stress generated by the cuspal flexure during occlusal loading and water absorption.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.102-107
• /
• 2009

In clinical pediatric dentistry, we have many chances to encounter the white spot like incipient enamel lesions on the mesial surfaces of the 1st molars with direct vision, especially just after the 2nd primary molars were exfoliated. But it was thought highly desirable to assess if these lesions are properly and effectively managed yet. This study aims at surveying the prevalence of incipient lesions on the mesial surfaces of the 1st molars in children through direct observation and examining the suitability of adhesive sealing on them as a pilot trial in searching for their proper management. 1. Among the 124 mesial surfaces of the 1st molars examined, 34% were sound, 53% had incipient carious lesions and 13% had cavitated lesions. 2. In the sectional views of the specimens, 20% showed microleakage after thermo-cycling and it was thought not recommendable as a permanent method. Therefore in order to effectively fight against the incipient caries lesions in children‘s permanent teeth, it was thought proper not to rely on any one method, but to perform reinforcing oral hygiene and promotion of remineralization in combination with therapeutic sealing which is stronger in short-term sealing effect. Although therapeutic sealing has been considered as the core in minimally invasive concept to treat the white spot lesions, its long-term clinical trials have not been suggested. Continuous research is strongly required for making this approach to acquire permanent nature, especially in regards of proper pretreatment and high molecular materials deeply penetrable into enamel.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.72-81
• /
• 2017

The aim of this study was to evaluate the effectiveness of artificial saliva contamination and decontamination procedures at different stages of a bonding procedure on the microtensile bond strength (MTBS) of two one-step self-etch adhesives and a two-step total-etch adhesive to dentin of primary teeth. Forty-two extracted sound primary molars were randomly divided into three groups depending on three adhesives, Scotchbond Universal Adhesive (SBU), All-Bond Universal (ABU) and Prime & Bond NT (PNT). For each adhesive, the teeth were allocated into seven groups. Except for control group, group 1, the groups were contaminated with artificial saliva at three different stages: the groups 2 and 3 - before adhesive application; the groups 4 and 5 - before adhesive polymerization; the groups 6 and 7 - after adhesive polymerization. Decontaminating procedures were rinsing, air-drying (group 2, 4, 6) and air-drying (group 3, 5, 7). The specimens were restored with composite resin (Filtek, Z350) and microtensile bond strength was measured. The data was analyzed with one-way ANOVA and Tukey HSD test (p < 0.05). In the control group, using PNT resulted in significantly higher bond strength than when ABU and SBU were used (p < 0.001). For three adhesives, the groups 2, 4 and 6 had greater bond strength than the groups 3, 5 and 7. Also, when the artificial saliva was contaminated before adhesive polymerization (group 4, 5), it showed a significantly lower bond strength. Generally the two-step total-etch adhesive generated a higher bond strength than the one-step self-etch adhesive. Artificial saliva contamination before adhesive polymerization led to a drastic decrease in bond strength, and rinsing with water followed by air-drying could not recover the bond strength.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.699-716
• /
• 1998

This study was designed to evaluate the expression of non-collagenous protein in periodontal tissue during the experimental movement of rat incisors, by LSAB(labelled streptavidine biotin) immunohistochemical staining for osteonectin and osteocalcin. Twenty seven Sprague-Dawley rats were divided into a control group(3 rats) and 6 experimental groups(24 rats) where 75g of force was applied from helical springs across the maxillary incisors. Rats of experimental groups were sacrificed at 12 hours, 1, 4, 7, 14 and 28 days after force application, respectively. And the tissues of a control group and experimental groups were studied immunohistochemically and histologically. The results were as follows : 1. Until 28 days after force application, periodontal fibers had been strectched on tension side and compressed in pressure side of all the experimental groups, and the arrangement of periodontal fibers had not been recovered yet. 2. The expression of osteonectin in control group was rare in dentin, cementum and osteocyte, and was mild in odontoblasts and matrix of alveolar bone. 3. The expression of osteocalcin in control group was negative in gingiva, osteoblasts, osteocyte and cementum, and was rare in predentin, capillaries in pulp and periodontal ligament and the matrix of alveolar bone. 4. There was no difference in the expression of osteocalcin or osteonectin in dentin, cementum, pulp, odontoblasts, between of control and of experimental groups. 5. The expression of osteonectin in intermaxillary suture got the peak in 7-day and was declined after 14-day. The expression of osteocalcin remained in a same degree since it became mild in 14-day. 6. The expression of osteonectin in pressure side of periodontal ligament of experimental group was rare, which was similar to control group. But in tension side, it was increased until 14-day aftrer which it was declined. 7. The expression of osteocalcin in periodntal ligament was rare in 12-hour to 14-day, but became severe in 28-day, which was greater in tension side than in pressure side, and in the periodontal fiber next to alveolar bone than to tooth surface. 8. The expression of osteocalcin in alveolar bone was rare until 14-day in pressure side, but became moderate in 28-day. The expression of osteonectin was increased from 7-day by time dependency, which was greater in tension side than in pressure side.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.114-124
• /
• 2006

The purpose of this study was to evaluate the tooth color changes of resin bonding sites and their adjacent sites on orthodontic bracket bonding. Sixty extracted sound premolars were used and the tooth color was recorded according to the CIE $L^*a^*b^*$ color system using a spectrophotometer. The tooth colors of the twenty premolars were measured and compared before bracket bonding and after removal. On a further twenty premolars, the tooth color was measured before and after only primer application. In the change of $L^*$ values, according to the bracket bonding and primer application, the lightness was decreased, and in the change of $a^*\;and\;b^*$ values, the color was changed into a more yellowish color The color differences $({\Delta}E^*)$ were calculated from the $L^*a^*b^*$ values and compared with the standard value of clinical detection $({\Delta}E^*=3.7)$. The color differences between before the bracket bonding and after removal noted exceeded the standard value and those of between before and after the primer application were not larger than the standard value. Toothbrushing was performed after application of the primer to evaluate the color changes according to the primer abrasion. As a control, toothbrushing was performed on the last twenty premolars. The color differences noted were larger than the standard value after toothbrushing. Also, to evaluate the color changes of the tooth which is exposed to sun irradiation after bracket removal, additional photoaging was performed and the color was measured for all teeth. The additional color differences after photoaging were smaller than the standard value. The above results suggest that the tooth color changes after fixed orthodontic treatment.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.156-163
• /
• 1992

Pinus koraiensis (Pk), P. rigida (Pr) and P. rigida ${\times}$ P. taeda (Pr. t) seedlings in a bare-rooted nursery were artificially inoculated with Pisolithus tinctorius (Pt) and Thelephora terrestris (Tt) to test long term effects of ectomycorrhizal inoculation on host growth. Mycelial inocula of Pt and Tt were mass-cultured in vermiculite-peatmoss mixture and introduced into fumigated nursery soil before seed sowing. Bare-rooted, inoculated seedlings at one to four years of age were outplanted to the field with $P_2O_5$ content of 25 ppm in soil. At the time of outplanting, Pk seedlings(4 years old), Pr seedlings(2 years old), and Pr.t seedlings(1 year old) all infected by Pt were significantly taller by 28%. 26%, and 77%, respectively, than controlled seedlings infected by natural population of mycorrhizal fungi in the non-fumigated plot. Ten years after inoculation or six to nine years after outplanting, Pk seedlings inoculated with Pt were significantly taller by 9% Pr.t seedlings significantly taller by 18%, and Pr slightly Caller by 2%(not significant) than controlled seedlings, suggesting that the stimulatory effect of Pt on host growth gradually declined or became minimal after outplanting. Tt failed to stimulate host growth either in the nursery or in the field, and the survival rate of outplanted seedlings was not different among fungal treatments. Considerable loss of the infected root system during lifting the seedlings for outplanting would be the primary cause of the reduced effect of Pt in the field. Pt infected more than 90% of the fine roots in the fumigated nursery during the first growing season, but Pt assumed to fail to compete successfully with natural population of ectomycorrhizal fungi in the field. It is necessary to select other mycorrhizal fungi which adapt well in both nursery and field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.468-476
• /
• 2020

This study was performed to establish light intensity conditions for producing stem cuttings for aeroponic systems suitable for seed potato production using a closed-type plant production system. Shoot tip cultured plantlets of 'Sumi' and 'Chubaek' potato (Solanum tuberosum L.) were acclimatized, cuttings were collected, and stem cuttings were planted. The seedlings were raised for 40 days at different LED light intensities (60, 120, 180, and 240 μmol·m^-2·s^-1), and were cultivated in an aeroponic system for 80 days. When stem cuttings were raised at 60 μmol·m^-2·s^-1 LED light intensity, the plant height was the longest, at 17.3 cm for 'Sumi' and 16.1 cm for 'Chubaek', and the number of nodes was the highest in both cultivars. The higher light intensities, produced smaller plants with fewer nodes. The leaf areas, SPAD values, and Fv/Fm values differed slightly between cultivars. The fresh weight of stem cuttings, and the production rate of healthy stem cuttings were the highest at 60 μmol·m^-2·s^-1. In the aeroponic system, seedlings raised at 60 μmol·m^-2·s^-1 with LED light intensity showed a difference between the cultivars, but the fresh weight of stems and leaves above the planting plate was the heaviest. In addition, below the planting plate the stem cuttings were longest and the root weight was heaviest at 60 μmol·m^-2·s^-1 LED light intensity. The number of stolons also differed between cultivars, but was greatest for seedlings raised at 60 μmol·m^-2·s^-1 LED light intensity, at 4.2/plant for 'Sumi' and 7.7/plant for 'Chubaek'. At 60 μmol·m^-2·s^-1 LED light intensity, the tuber number and total tuber weight were the best, but the higher the light intensity, the smaller the total tuber number and total tuber weight for both cultivars. In conclusion, when producing potato stem cuttings for aeroponic systems using a closed-type plant production system, the most suitable LED light intensity for raising seedlings was found to be 60 μmol·m^-2·s^-1.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.249-256
• /
• 2016

This study was performed to investigate the effect of various concentrations of Diniconazole (DC) on the growth and quality of grafted tomato (Solanum lycopersicum) seedlings cultivated during the summer season. Concentrations of DC were set to 0 (non-treatment), 5, 10 and $20mg{\cdot}L^{-1}$, were treated once 3 days after grafting. Rootstock of the seedlings was shorter in the DC $5mg{\cdot}L^{-1}$ and $10mg{\cdot}L^{-1}$ treatment compared to the non-treatment, and the scions were significantly shorter in the DC $20mg{\cdot}L^{-1}$ treatment. Seedlings were significantly shorter in the DC $20mg{\cdot}L^{-1}$ treatment compared with the non-treatment. Leaf area was lower for seedlings subjected to all treatments than for seedlings in non-treatment group, and reduction was dose dependent. In particular, the DC $20mg{\cdot}L^{-1}$ treatment inhibited both leaf and stem growth. The fresh weighs of leaves and stems of the seedlings treated with DC $5mg{\cdot}L^{-1}$ and the fresh weights of roots subjected to all treatments were significantly greater than those of the non-treatment seedlings. Dry weight per organs of the seedlings treated with DC $5mg{\cdot}L^{-1}$ was significantly greater that of the non-treatment seedlings, but the dry weight of leaves of seedling treated with DC $20mg{\cdot}L^{-1}$ was much less than that of the non-treatment seedlings. The T/R ratio of the seedlings was lower for all treatments than for the non-treatment. The relative growth rate of the seedlings was significantly lower in the DC $20mg{\cdot}L^{-1}$ treatment and, the leaf area rate of seedlings was lower in the DC $5mg{\cdot}L^{-1}$ and $10mg{\cdot}L^{-1}$ treatment than in the non-treatment. Therefore, the optimal concentration of Dinoconazole used to produce a suitable grafted tomato seedling in the summer season is $10mg{\cdot}L^{-1}$ or less.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.5
• /
• pp.477-482
• /
• 2006

Viral diseases, especially Barley yellow mosaic virus (BaYMV) and Barley mud mosaic virus (BaMMV), have been most serious in barley fields. In this study, we investigated the effect of different level of resistance to viral diseases on the plant growth and yield in barley. Various viral disease symptoms on leaves of overwintered plants were similar between medial-resistant and susceptible varieties of Saessalbori and Baegdong. In diagnosis of virus infection, BaYMV and BaMMV were detected in Saessalbori and Baegdong, but not in the resistant variety, Naehanssalbori. Plant height was restrained about $11{\sim}12cm$ prior to heading in Saessalbori and Baegdong comparing to Naehanssalbori. Even if both varieties were medial resistant to virus diseases, Saessalbori was different from Baegdong in heading date and culm length due to its recovery from viral damages prior to heading. Both medial-resistant and susceptible varieties were quite different from the resistant variety in yield components such as heading date, number of spikes and culm length when evaluated in the virus-infected or non-infected field. Baegdong delayed 7 days in heading date and reduced by more than 50% in culm length and spike numbers as compared to Naehanssalbori. On the other hand, Saessalbori showed similar heading date, but was shorter by 20% in culm length than Naehanssalbori. Three varieties tested in the non-infected field over two years were not significantly different for yield potential with ranges of $340{\sim}405kg/10a$. However, significant yield reduction (P<0.01) was observed in Saessalbori and Baegdong with ranges of $108{\sim}288kg/10a$ as compared to Naehanssalbori (391 kg/10a) when tested in the virus-infected field. Yield potentials of Saessalbori and Baegdong reduced by 35 and 63%, respectively in the virus-infected field as compared to those in the non-infected field. Our results showed that damages from virus diseases were significant on the early plant growth to yield and its components in barley.