• Nuclear Engineering and Technology
• /
• v.16 no.3
• /
• pp.141-154
• /
• 1984

An analysis is presented of key phenomena and scenario which imply some general trends for beyond design-basis-accident in Kori-1 PWR dry containment. The study covers a wide range of severe accident sequences initiated by small break LOCA. The MARCH computer code, with KAERI modifications was used in this analysis. The major emphasis of the paper are two folds, 1) the phenomenologic understanding of severe accident and 2) a study of H2 combustion and debris/ water interactions in a specific small break LOCA for Kori-1 plant. The sensitivity studies for the specific plant data and thermal interaction modelings used in the SASA were performed. The results show that if hydrogen burning does occur at low concentration, the resulting peak pressure does not exceed the design value, while the lower concentration assumption results in repeated burning due to the continuing H$_2$ generation. For debris/water interaction, the particle size has no effect on the magnitude of peak pressure for the amount of water assumed to be in the reactor cavity. But, the occurrence of peak pressure is considerably delayed in case of using the dryout correlation. The peak containment pressure predicted from the hydrogen combustion and steam pressure spite during full core meltdown scenario does not present a severe threat to the containment integrity.

• Nuclear Engineering and Technology
• /
• v.23 no.1
• /
• pp.1-11
• /
• 1991

The objective of this study is to investigate the effect of weld line on the mechanical strengths and the process of weld line elimination in the Zircaloy-4 resistance upset welding for the fabrication of heavy water reactor fuel rods. The weld current and the amount of upset increased linearly with the main heat, in which two relations between them were derived. It was found that the threshold to obtain sound weld was 50% of main heat in terms of weld upset size, mechanical strengths and weld line elimination. The weld microstructure of resistance upset welds of Zircaloy-4 comprsied basketweave, Widmanstatten and martensite respectively by changing the main heats. Dimples on uniaxially fractured surface at weld line in the Zr-4 welds were larger and deeper compared with those on biaxially fractured surface. It was also found that the process of the weld line elimination in the resistance upset weld of Zircaloy-4 could be divided into three stages in terms of the presence of many pores, their shrinkage and elimination, and the shrinkage of the original weld interface with increasing weld currents.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.1
• /
• pp.1-11
• /
• 1971

1. Rice plant grown with silica had more elect leaves and heading was one week earlier with silica than without silica grown in both water culture and Akiochi soil. 2. Silica content of rice plant was apparently increased by silica application and the increase insilica was more increased by bassal application of silica than top dressing. The content of other eements in plant decreased with silica application and the trend was most noticeable in iron. 3. Rice plant low in silica were more susceptible to reaf blast, Helminthosporium, mites and smaller brown plant hopper. 4. There was no significant effect of silica on increasing the dry matter production of rice plant grown on water culture, but silica remarkerbly increased the dry matter production of rice plant grown on Akiochi soil. The increasing effect of silica on rice grown on Akiochi fields was more noticeable than that of grown on Pots. 5. In rice plant grown on Akiochi soil, number of spikelets and percentage of ripened grains were increased by application of silica. The silica effects can be increased by application of well balanced nitrogen and potassium ratio. 6. From these results, it can be concluded that silica seems to have no direct effect on rice growth, but application of silica to Akiochi soil associated with low silica supply may be critical for healthy growth of rice plant, and silica directly related to rice agronomy.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.405-411
• /
• 1999

Growth responses and yields of cucumber, the populations of soil microorganisms, and the control value of nematodes were examined with six different treatments of chemical fertilizer, compost, microbial fertilizer(MF), and the combined applications of NPK + MF and compost. Cucumber, Eunseong Bakdadaki cultivar, was cultivated in the greenhouse. Higher plant height was appeared with treatments of the combined application of NPK + compost and NPK + MF compared to other treatments, especially at the early growth until 20th day after transplanting. Also, higher number of opened flowers showed with the combined treatments of NPK + compost and NPK + MF than those with others. The control value of nematodes at 60th day after transplanting with treatments of MF and NPK + MF was about 39.0% and 61.6%, respectively. The density of soil microorganisms was higher in order of actinomycetes, bacteria, and fungus. Their densities were not clearly different with treatments. Fruit yields of cucumber with treatments of NPK, compost, microbial fertilizer, and additions of compost and microbial fertilizer to NPk were higher, about 40 to 60%, than that with the control. The highest fruit yield was with NPK + MF and next highest fruit yield was with NPK + compost. It is assumed that the combined application of chemical fertilizers, compost, and microbial fertilizers would be increased the plant productivity.

• Composites Research
• /
• v.34 no.5
• /
• pp.317-322
• /
• 2021

When a complex load such as torsion, low-speed impact, or fatigue load is applied, the properties in the thickness direction are weakened through microcracks inside the material due to the nature of the laminated composite material, and delamination occurs. To prevent the interlaminar delamination, various three-dimensional reinforcement methods such as Z-pinning and stitching, and structural health monitoring techniques that detect the microcrack of structures in real time have been continuously studied. In this paper, the single-lap joints with I-fiber stitching process were manufactured by a co-curing method and their strengths and failure detection capability were evaluated. AE and electric resistance method were used for detection of crack and failure signal and electric circuit for signal analysis was manufactured, and failure signal was analyzed during the tensile test of a single-lap joint. From the experiment, the strength of the single lap joint reinforced by I-fiber stitching process was improved by about 44.6% compared to the co-cured single lap joint without reinforcement. In addition, as the single-lap joint reinforced by I-fiber stitching process can detect failure in both the electrical resistance method and the AE method, it has been proven to be an effective structure for failure monitoring as well as strength improvement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.263-270
• /
• 2021

In this study, a reliability-based design optimization of a 130-m class fixed-type offshore platform, to be installed in the North Sea, was carried out, while considering environmental, material, and manufacturing uncertainties to enhance its structural safety and economic aspects. For the reliability analysis, and reliability-based design optimization of the structural integrity, unity check values (defined as the ratio between working and allowable stress, for axial, bending, and shear stresses), of the members of the offshore platform were considered as constraints. Weight of the supporting jacket structure was minimized to reduce the manufacturing cost of the offshore platform. Statistical characteristics of uncertainties were defined based on observed and measured data references. Reliability analysis and reliability-based design optimization of a jacket-type offshore structure were computationally burdensome due to the large number of members; therefore, we suggested a method for variable screening, based on the importance of their output responses, to reduce the dimension of the problem. Furthermore, a deterministic design optimization was carried out prior to the reliability-based design optimization, to improve overall computational efficiency. Finally, the optimal design obtained was compared with the conventional rule-based offshore platform design in terms of safety and cost.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.5
• /
• pp.95-111
• /
• 2021

This paper is a study to check the flow of how addiction to media services has been studied from a long-term perspective, and to identify variables that can be the basis for future addiction research. Researchers noted the addiction of media services in adolescents in particular, and identified a combination of factors depending on the background of the times. Addiction variables were largely aggregated into four properties: adolescent properties, personal properties, media properties, and media-dependent properties. Addiction variables belonging to the attribute were influenced by major media and divided into four periods. During the study period, the frequency of variables was most related to personal attributes, followed by media attributes, adolescent attributes, and media-dependent attributes. Also Individual attribute variables gradually shifted from object-relationship to individual psychological factors. Variants in media attributes were influenced by the introduction and spread of new media. Variations in adolescent and media-dependent attributes have been weak in studies that observe teenagers' motivations for media use or are related to addiction, and no papers have been published since 2020. Although addiction research on media services is important in terms of industry, there has been an emphasis on social aspects, based on the results of this study, we hope to continue to study the variables of service users who can be used in terms of industry.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.806-816
• /
• 2021

This study aims to describe the reporting patterns of articles on the Emergency Grant for all citizens(EGAC) and compare the reporting attitudes by newspaper companies. The main results are as follows: First, conservative newspapers reported more than four times as much coverage of EGAC as liberal newspapers. Newspaper articles reported during the week of the National Assembly Election Day accounted for about a quarter of the total, and 79.1% of the articles were reported in the political realm of newspapers, and only 2.8% in the social realm. Second, a conservative newspaper reported a critical attitude toward EGAC at 52.6% and favorable articles at 5.3%. On the other hand, in a liberal newspaper, critical articles were 17.1% and favorable articles were 37.1%. The inefficiency of selectivism was reported as the basis for the argument in favor, and concerns about the burden of deterioration in the financial soundness of the opponents were reported the most. Politicians are the most cited sources of information in articles. Finally, in prior to policymaking, the proportion of the media in favor of and against the news was similar, and the proportion of articles with a neutral attitude accounted for more than half. And in the specific method discussion stage, the articles in favor of the article exceeded the proportion of articles on the opposite side.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.276-283
• /
• 2021

The capital structure of the shipping business, which is characterized by its capital intensity and extreme market volatility, is closely related to long-term stability. Research in this area has been conducted mostly in the form of deriving the determinants of capital structure from company-wise financial ratios. This research, on the other hand, has a different approach to the topic. It identifies the relationship between actual cash profit and loss and other variables - i.e. actual vessel prices, interest rates and leverage ratio - by employing historical simulation. The result demonstrates that the P anamax cash profit shows 0 (break-even point) when the debt weight reaches 64.38% (debt ratio 180.74%) and the Cape, 73.04% (debt ratio 270.92%). Additionally, the ships of different types show a divided pattern for the pre- and post-'Super Boom'. It indicates that the business area and the market cycle should be considered when a leverage strategy is established. This research benefits shipping companies set a rational leverage strategy as well as delivers a reasonable guideline to government authorities for the development of a sound policy on shipping finance.

• Stress
• /
• v.25 no.2
• /
• pp.93-97
• /
• 2017

Backgound: The present study was designed to investigate the moderating role of binge drinking on the relationship between self-assertiveness and sexual victimization among college students (N=393, male: 161, female: 232). We hypothesized that the relationship between self-assertiveness and sexual victimization is meaningful only when binge drinking is low, not high. Methods: Using an online site, participants filled out a packet of questionnaires for demographic information, their amount of unwanted sexual contact experience, and their rate of alcohol consumption. Results: In the result, binge drinking moderated the relationship between self-assertiveness and sexual victimization. For the high binge drinker group, high self-assertiveness was not a statistically significant predictor of sexual victimization. Conclusions: Although self-assertiveness is known to be a protective factor against sexual victimization, our results imply that self-assertiveness alone is not enough to lower sexual victimization. Binge drinking and self-assertiveness are considered together in sexual violence prevention programs.