• Resources Recycling
• /
• v.17 no.2
• /
• pp.46-54
• /
• 2008

It is well known that PCB (Printed Circuit Board) is a complex mixture of various metals. In this study, pyro-metallurgical process was investigated to extract valuable metallic components from the PCB scrap. PCB scrap was shredded and oxidized to remove plastic materials, and then, quantitative analysis were made. 15 mass %$Al_2O_3-45$ mass %CaO-40 mass %$SiO_2$ and 32 mass %$SiO_2-20$ mass %$Al_2O_3-38$ mass %CaO-10 mass %MgO, were chosen as basic slag compositions which are determined based on the quantitative analysis of PCB scrap. During experiments a super kanthal rotating furnace was used to melt and separate metallic components. Moreover the revolution effect on was the recovery of valuable metals from PCB scrap also investigated.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.3
• /
• pp.209-218
• /
• 2012

A pyroprocess is currently being developed by KAERI to cope with a highly accumulated spent nuclear fuel in Korea. The pyroprocess produces a certain amount of high-level radioactive waste (HLW), which is solidified by a ceramic binder. The produced ceramic waste will be confined in a secure disposal canister and then placed in a deep geologic formation so as not to contaminate human environment. In this paper, the development of a disposal canister was overviewed by discussing mainly its design premises, constitution, manufacturing methods, corrosion resistance in a deep geologic environment, radiation shielding, and structural stability. The disposal canister should be safe from thermal, chemical, mechanical, and biological invasions for a very long time so as not to release any kind of radionuclides.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.3
• /
• pp.167-174
• /
• 2009

A comprehensive analysis has been conducted on the purity of the uranium product generated from a pyroprocessing of EBR-II spent fuel. The analysis results were compared to the low-level waste criteria for both ROK and USA under a collaborative program between INL and KAERI. It is found that the US LLW definition does not include the activity from any U isotopes, but the Korean one does. The analysis results show that Pu-239 is the only alpha emitting isotope other than U isotopes that exceed the limit in the EBR-II U product. Pu contamination of the product seems to be drastically reduced in a preliminary test of the modified cathode process, and the further development of the proposed technology may be possible to meet the US LLW criteria.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.886-890
• /
• 2006

Rice flours produced by dry, wet, and semi-wet milling methods were used to investigate bread-making properties. Wet milled rice flours were produced by two different steeping temperatures of $25^{\circ}C$ and $55^{\circ}C$, properties of composite flour containing 70% rice flour and 30% wheat flour with the addition of vital wheat gluten were tested. Among rice flours, wet milled rice flour showed increased mixing time and dough stability determined by a mixograph. Wet milled rice flours produced higher loaf volume compared with dry of semi-wet milled rice flours. Wet-milled rice flour steeped at $55^{\circ}C$ appeared to produce good rice breads with relatively high loaf volume. Crumb hardness of bread prepared with wet milled rice flour was lower than the other breads and increased slowly during 3-day storage at $25^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.7
• /
• pp.900-907
• /
• 2008

The physicochemical properties of black rice flours produced from dry and wet milling were carried out to investigate their applications in food processing industry. The dry milled black rice flours showed lower fat, protein, ash, and anthocyanin contents than those of wet milled black rice flours with no effect due to number of millings. Average particle sizes ($379{\sim}288\;{\mu}m$) of dry milled flours were bigger than those ($336{\sim}253\;{\mu}m$) of wet milled flours. Particles with 60 mesh or more increased with increasing milling times. Wet milled flours had higher damaged starch, water solubility index (WSI), and water absorption index (WAI) compared to dry milled flours. Pasting properties measured by rapid visco analyzer (RVA) resulted in higher pasting temperatures in dry milled flours ($62.5{\sim}69.4^{\circ}C$) than wet milled flours ($46.1{\sim}46.4^{\circ}C$). As the number of milling times increased, pasting temperature of wet milled flours were not effected. Dry and wet milling resulted in reduced trough, final viscosity, and consistency with increasing milling times.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.69-76
• /
• 2005

In this study, the high qualify recycled fine aggregate manufacturing system by the drying specific gravity separation method was evaluated. For the evaluation of the performance of the recycled aggregate, the engineering properties and durability of recycled aggregate has been tested. From the test results, the quality of recycled fing aggregates was improved by high quality recycled fine aggregate manufacturing system and satisfied with the quality standards of KS and JASS 5. Also, compressive and tensile strengths of recycled concrete show no critical difference caused by recycled fine aggregate replacement ratio. However, durability such as carbonation depth chloride ion penetration depth and drying shrinkage shows more deterioration than the concrete without recycled fine aggregate

• International Journal of Highway Engineering
• /
• v.3 no.3 s.9
• /
• pp.111-118
• /
• 2001

Since the advent of turbojet aircraft with their greater weight and high landing speed breaking performance on runway surface has become un critical. Under certain weather conditions(wet weather, winter) hydroplaning or unacceptable loss of traction can occur, resulting in poor braking performance and possible loss of directional control. To address this concern a number of research project me conducted by NASA, FAA, USAF. The various method which was reported the advantage of the increasing the friction and decreasing the hydroplaning effect. A-2 section of inchon international airport was grooved using drying grooving method. In order to evaluate the effectiveness of the dry grooving method the surface was spray with water and measured the fiction factor and the depth of the water using Mu meter and water depth measuring device. The field test results shooed that the fiction factor nos increased and the depth of the water decreased. The dry grooving method illustrated the reduction of hydroplaning and also, no distress on the runway.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.219-231
• /
• 2009

The purpose of this study is to provide basic information necessary for the cleaning of excavated costumes. For the purpose, these researchers reviewed previous records of the actual cleaning of excavated costumes and then implemented and documented the processes of cleaning the Yeosan Song's costumes excavated at Mokdal-dong, Daejeon, which could date back to the early and mid periods of Choseon Dynasty. The excavated clothes of the family provide good examples for comparing men's costume of the 15th century with men's and women's of the mid and late 16th century. The total quantity of excavated remains were 184 and textiles were cotton, silk, hemp, ramie, and union cloth. The clothing remains were processed through wet or dry cleaning in accordance with their fabric condition and the extent to which they were worn or polluted. In detail, the excavated costumes of the Yeosan Song family were cleaned in two stages. For wet cleaning, both anionic(LAS) and nonionic(Triton X-100) surfactants were respectively used as cleaning agents and for dry cleaning, a mixture of n-hexane and n-decane(the ratio of 4 to 6) and petrolic dry cleaning solvent were used. After first cleaning, some cotton, ramie and hemp which had still the stains were processed bleaching and silk which were good condition was processed dry cleaning with the organic solvent again.

• The Science & Technology
• /
• v.32 no.8 s.363
• /
• pp.78-79
• /
• 1999

표면기술은 수용액 등의 분위기에서 처리하는 습식법(도금기술)과 플라즈마, 진공 등의 분위기에서 처리하는 건식법(박막기술)으로 대별할 수 있다. 1950년대부터 시작된 도금기술은 환경문제, 경제성 등으로 어려움을 겪고 있으나 박막기술은 첨단산업의 추세에 맞추어 기술발전이 극대화되고 시장도 급속히 성장하고 있다. 박막기술중의 중요한 신기술은 다이아몬드 박막 분야인데 수명과 절삭능력이 수십배로 향상될 이 기술은 2~3년 안에 상품화 될 것으로 예상된다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.193-196
• /
• 2003

시공간 빔포밍 기술은 기존의 배열 안테나가 공간만의 처리를 해온 것에 대하여 이를 시간 영역으로까지 확장하여 특정한 방향에서 특정한 시간에 도착하는 다중경로는 증폭하고 다른 다중경로는 제거하는 것을 의미한다. 본 논문은 배열 안테나를 가진 DS-CDMA에서 시스템 파라미터 부정합이 존재할 때, 시공간 빔 형성기의 성능에 대하여 연구하였다. 시뮬레이션 결과, 부정합이 존재할 때 전통적인 빔포머가 상대적으로 강인함을 보였지만 원근 문제는 해결할 수 없었으며, 실제의 추정 결과를 적용했을 때는 MUSIC 시공간 빔포머가 가장 우수한 성능을 보였다.