• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.29-36
• /
• 2004

An experimental study on drilling of stainless steel is conducted using TiAlN coated drills and HSS twist drills with several cutting conditions; feed rate, spindle rotational speed, and dry/wet cutting. The effects of number of hole on the thrust force are examined by cutting force measurement. The flank wear of the drills and the change of hole diameter are quantitatively observed using a vision system. It is found that the thrust force in drilling with TiAlN coated drills decrease under dry and wet machining, whereas the flank wear resistance is improved.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.184-192
• /
• 2017

Rice flours from five rice (Oryza sativa L.) varieties with different amylose content were prepared by both wet and dry milling processes. The moisture content of wet-milled rice flours (WMR) was approximately three-times higher than that of dry-milled rice flours (DMR). Water absorption index (WAI), water solubility index (WSI), and swelling power (SP) increased in proportion to temperature. The WAI, WSI and SP values of DMR were higher than those of WMR. Baeokchal (BOC), which is a waxy rice cultivar, had a significantly high WSI value. Pasting properties of DMR, except for the BOC cultivar, resulted in an increase in peak, trough, final, and setback viscosities. The levels of resistant starch in four cultivars, except for Dodamssal (DDS), were under 1%, irrespective of the milling process, whereas the resistant starch contents of DMR and WMR in DDS were 9.18% and 6.27%, respectively. In vitro digestibility of WMR was higher than that of DMR, and the estimated glycemic index of the rice flour varieties ranged from 57.6 to 81.3. Damaged starch content of WMR was less than that of DMR; in addition, a negative correlation was observed between the amylose and damaged starch contents of WMR. These results suggest that the properties of rice flour vary depending on the milling method and flour variety, and could be a reference for selecting the appropriate processing method.

• Clean Technology
• /
• v.12 no.3
• /
• pp.182-189
• /
• 2006

In this study, high speed machining is evaluated with regard to economical and environmental effects. Considering environmental loads, machining costs are analyzed with the mathematical models of machining economics and cutting fluid loss. Data from the tool life experiments of high speed milling and turning are used for the analysis. The analysis of high speed milling shows that the machining cost decreases as increasing the cutting speed. In turning process, the cooling method using cutting fluid shows the minimum machining cost. Considering both machining and environmental costs, cooling method using cold air is superior to other methods.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2007.11a
• /
• pp.237-238
• /
• 2007

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.53-62
• /
• 2003

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.64-67
• /
• 2003

The authors have settled general modular design by analyzing related literatures, but general modular design are too massive to be applicable to all process devices. So, the common parts have to be selected, applied, and modified for the devices. We have chosen the dry pulverizing/mixing device for example. We have elected the target modules of this device such as flange, hinge, bolt, nut coupling. The remote assembling and disassembling possibilities of the selected modules have been analyzed from the viewpoints of visibility, interference, approach, weight and so on. We have presented final modular design proper to the target modules. The modular designs which have adopted the modular property been analyzed. The modular design points are comprised of common and unique points. Some points are common for several devices, such as bolt, flange and so on. Others are unique for each device, such as power transmission coupling. The experimental devices have been modified by these modular design points and the design drawings have been presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.1051-1054
• /
• 2002

Environmentally conscious machining and technology have been taking more and more important position in machining process. Since cutting fluid has some impact on environment, many researches are being carried out to minimize the use of cutting fluid. It can be Increased the environmental pollution through not using coolant any more or minimizing it. In this study, the cooling effects of cutting methods using the compressed cold air, dry cutting and cutting fluid will investigate in the blade machining. In order to examine the characteristics of cutting and tool in the environmentally conscious machining, this work investigates experimentally the degree of tool wear, cutting force and characteristics of surface roughness in relation to machining conditions and cooling methods.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.503-508
• /
• 1998

연구용원자로인 하나로(HANARO)에서 중성자 조사된 캡슐 및 핵연료다발을 절단 및 해체하기 위한 장비인 캡슐절단기를 개발하여 조사재시험시설(IMEF)의 M2 핫셀(hot cell)에 설치하였다. 재료 및 핵연료의 개발을 위해 하나로에서 조사되는 캡슐 및 핵연료다발의 절단 및 해체는 핵연료봉 및 캡슐내부에 내장되어 있는 시편에 손상 및 결함이 발생하지 않도록 하는 것이 매우 중요하며, 이러한 장비는 핫셀의 작업구역에서 원격조작기를 사용하여 원격으로 조작이 용이하도록 설계 및 제작되어야 한다. 이에 조사재시험시설에서 개발한 캡슐절단기는 가공물이 회전 및 좌우이송, 절단용 철이 회전 및 전후이송이 각각 되도록 하였고, 핫셀내에 설치하기 전에 가공에 필요한 최적의 조건을 설정하였다. 그리고 핫셀내 설치후 중성자에 조사되지 않은 하나로용 핵연료다발과 조사된 무계장캡슐을 건식상태로 절단 및 해체하여 장비 성능을 확인하였다.

• Laser Solutions
• /
• v.11 no.1
• /
• pp.7-11
• /
• 2008

Decapsulation technology is useful to inspect EMC of package device and the etching technology enable to check inside of device by removing plastic molding. Chemical etching method is used widely to fabricate a lot of semiconductor. But the method has some disadvantage due to wet process. Proposed method in this paper shows the application possibility such as fast processing time, processing accuracy and dry process. These result was obtained by directly removing of packed EMC using UV laser.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.31-37
• /
• 1995

Effects of glycol pretreatment conditions such as concentration and molecular weight of glycols and dye types of different constitutions on the degree of transfer were investigated when transfer printed onto the cotton fabric with disperse dyestuffs. Obtained results are as follows ; 1. Although the degree of transfer increases linearly with temperature a time, above a certain critical point, they show decremental aspects for both of C.I. Disperse Orange 3 and C.I. Diperse Violet 1. 2. Degree of transfer increases with molecular weight of glycols, but PEG 200 which has a moleular weight 200 and boiling point of 300$^{\circ}C$ is more effcient than that of lower molecular weight. 3. Degree of tansfer for the C.I. Disperse Orange 3 having constitution of azo benzene type is somewhat higher than that of C.I. Disperse Violet 1 of amino anthraquinone.