• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1999.11c
• /
• pp.219-236
• /
• 1999

This study is to acquire a thorough understanding of the S&T level of Korea to serve as an important basis for the government policy-making, and to make basic information available to effectively promote the National R&D Program by survey of the overall S&T level in Korea S&T level survey is a comparison to the highest levels in the world to the third 3digit of the technology tree table. And, survey of technological gaps by year, during which Korea is able to reach the current level of the advanced countries. The findings of the surveys should be applied to strategic technology Planning for solving or narrowing the technology gap, e the major criteria for resources allocation in National R&D programs. And, the findings of the surveys should be the fundamental information used to establish strategic S&T policy in government.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2016

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements to mechanize routine agricultural tasks. When the FEL is used with a loaded bucket, careful operation is required to maintain safety and avoid spillage when the tractor passes a bump because a change in the gravity center of the tractor due to varied loadings can affect the stability of the tractor. Use of a boom suspension system consisting of accumulators and orifice dampers can be instrumental in reducing pitching vibrations while increasing the handling performance of the FEL-mounted tractor. The objective of this research was to reduce bump shocks by adding an orifice and a flow control valve to the original hydraulic circuit composed solely of accumulators. A simulation study was performed using the SimulationX program to investigate the effects of an accumulator and an orifice-throttle damper on bump shocks. Results showed that the peak pressure on a boom cylinder and the vertical acceleration of a bucket were significantly affected by use of both an accumulator and an orifice damper. In a field test conducted with a 75-kW tractor, the peak pressure of the boom cylinder, and the root mean square (RMS) vertical acceleration of the bucket and seat were reduced by on average, 23.0, 42.2, and 44.9% respectively, as compared to those measured with the original accumulator system, showing that an improved design for the accumulator hydraulic circuit can reduce bump shocks. Further studies are needed to design a tractor suspension system that includes the effects of cabin suspension and tires as well as dynamic analysis.

• Journal of Science and Technology Studies
• /
• v.19 no.3
• /
• pp.201-246
• /
• 2019

Information technology is sometimes considered as a cause that puts education in a big crisis, or it can be seen as a savior. In 2011, the Korean government announced that it would innovate education and build a talented nation by bringing IT into schools of public education system through the SMART education policy. The policy initiative aimed to establish a standard classroom models that can be diffused all over the country's schools so that teachers and students may become familiar of using devices such as tablet PCs and laptops. This paper analyzes how the smart classrooms caused friction in the actual education practices. To this end, I analyzed the direction and ideals of the SMART education policy by reading government policy document and design guidelines officially published, and visited three elementary schools that are actually building and operating a smart classroom environment to visit the facilities and have in-depth interviews with teachers and technicians. The ideal type of classroom proposed by the smart education policy was a package equipped with various functions at once in a neatly designed space like a "model house", but it was difficult to be used as a normal classroom in everyday life of school. Instead of copying and installing the model, each school decided to get "smart" in its own way, depending on how factors such as size, local characteristics, socioeconomic conditions of students and teachers, teacher experiences, and the level of existing infrastructure were combined. In Elementary School A, the machines tamed specific space of the school to create their own space, while following the rules of the school for being mobile. Although Elementary School B could not construct fully supported environment that encompassed the entire school, the system was organized with the help of well trained teacher's experiences in other schools. In Elementary School C, the machines are concentrated on specific classrooms and they promote teacher's professionalism. The components of the smart classroom were disassembled and recombined in context to make each school's classroom "smart".

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.86-86
• /
• 2018

본 연구는 한국의 도시재생과 스마트 물 관리의 정책 분석을 위하여 도시재생과 스마트 물 관리의 등장 배경, 주요 현안 및 연계성을 모색하고 도시재생방안으로서 스마트 물 관리체계의 가능성을 검토하는 것을 목적으로 한다. 1950년대의 도시재건(Urban Reconstruction)과 1970~80년대의 도시재개발(Urban Renewal, Urban Redevelopment) 등의 정비 사업은 물리적 환경정비에 초점을 맞추었다. 그러나 1990년대 환경문제가 세계적 이슈로 등장하면서 교외지역 난개발 문제에 대한 대응책이 필요하게 되었고 도시의 물리 환경적, 산업 경제적, 사회 문화적 측면을 부흥시키는 도시재생 접근법이 출현하였다. 한국 정부는 2017년부터 시작한 '도시재생 뉴딜사업'의 일환으로 스마트 기술을 적용한 도시재생사업을 통해 스마트도시 선도국가 도약과 세계적 흐름에 부합하는 도시성장을 기대하고 있다. 1980년대 초 등장한 스마트 기술은 2000년대 들어와 스마트 도시, 스마트 인프라, 스마트 그리드 등의 분야로 확대, 진보하였다. 물 분야의 스마트 기술은 2009년 스마트워터그리드 이니셔티브(Smart Water Grid Initiative)의 발족과 함께 IBM, CISCO, Intel 등의 IT 기반 물 관리 워킹그룹 형성, Suez, Veolia, Siemens 등 수처리 기업의 스마트워터그리드 분야 진출 모색과 함께 발전하기 시작하였다. 이후 2012년 유엔 스마트 물 관리 포커스 그룹(ITU-T SG 5)의 스마트 물 관리 표준화 연구가 착수되었고 한국은 국토교통부 건설교통기술 연구 개발사업 중 하나로 스마트 물 관리 장기 연구 사업을 시작하였다. 스마트 물 관리는 수자원 및 상하수도 관리의 효율성 제고를 위하여 스마트 미터, 센서, 디지털지도제작 등 ICT를 이용한 차세대 물 관리시스템이라고 정의할 수 있다. 구체적인 대상 분야를 고려한다면 하천수, 우수, 지하수, 하폐수처리수, 해수담수 등 다양한 수자원의 관리, 물의 생산과 수송, 사용한 물의 처리 및 재이용 등 물 관리 전 분야를 포함한다. 그러나 스마트 물 관리의 용어와 개념을 처음으로 도입한 미국 등 선진국과 관련기업들은 스마트 물 관리를 '스마트 워터 미터, 센서, 첨단 모델링, 수문 지도제작, 스마트 관개농업, 자동화 로봇 등 다양한 기술을 통합적으로 운영하는 지능적인 수자원 관리를 위한 정보네트워크'로 정의한다. 일찍이 도시재생으로의 패러다임 전환을 실시한 영국 및 일본과 달리 한국의 도시재생은 개념, 구성요소, 범위, 사업방식 등의 여러 가지 측면에서 아직 형성단계에 있다. 또한 한국의 스마트 물 관리 논의는 개념정립 측면에서 심층적 논의가 거의 부재하였다. 기존의 논의들은 수자원 혹은 상하수도서비스 분야에서의 연구결과와 기술개발성과를 기계적으로 적용하고 확대하는 측면만을 부각시켰다. 그러나 이와 같은 스마트 물 관리에 대한 논의는 정보통신기술과 물 관리 서비스를 단편적으로 연결하고 적용범위를 제한할 수도 있다는 점에서 한계성이 있다. 본 연구는 국내외 문헌검토를 바탕으로 한국의 도시재생과 스마트 물 관리의 정책을 분석하고 지금까지 별개로 간주된 두 개념의 장점을 융합하여 향후 지속가능한 도시개발 사업으로서의 가능성을 검토하고자 한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.917-930
• /
• 2018

A quantitative risk assessment method for quantitatively evaluating the fire risk in designing a road tunnel disaster prevention facilities has been introduced to evaluate the appropriateness of a disaster prevention facility in a large tunnel through which all vehicle types pass. However, since the quantitative risk assessment method of the developed can be applied only to the large sectional area tunnels (large tunnels), it is necessary to develop a quantitative risk assessment method for road tunnels passing only small cars which has recently been constructed or planned. In this study, fire accidents scenarios and quantitative risk assesment method for small road tunnels through small cars only which is based on the methods for existing road tunnels (large tunnels). And the risk according to the distance between cross passage is evaluated. As a result, in order to satisfy the societal risk assessment criteria, the distance of the appropriate distance between cross passages was estimated to be 200 m, and the effect of the ventilation system of the large port exhaust ventilation system was quantitatively analyzed by comparing the longitudinal ventilation system.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.64-77
• /
• 2013

In China, archaeological research on Xiongnu started later than in foreign countries. In the late $19^{th}$ century, several Russian archaeologists started to study Xiongnu's archaeological culture. However, since the late $20^{th}$ century, archaeological research of the Xiongnu in China quickly gained speed. The Xiongnu culture has been reported in Mongolia, northern steppe of China and eastern part of Eurasian steppe. Mainly, Xiongnu sites, dated from the late 2nd century B.C. to the 1st century A.D., are reported on the west side of Baikal Lake(Zabaikal), Mongolia and the Inner Mongolia of China. Based on the historical records and the archaeological remains, the North Xiongnu culture is defined to be the remains of Zabaikal, and the South Xiongnu culture the archaeological remains of Northern China. The expelled North Xiongnu, while fleeing to the western part of Eurasia, left traces of their own archaeological remains in southern Kazakhstan, Xinjiang of China, Altai, and finally appeared in the Europe as Huns. In order to adapt to the environment of northern steppe of China, Xiongnu used a nomadic economic system, giving uniqueness to its iron works. The most characteristic iron works of the Xiongnu is the highly-sophisticated iron weapons. Compared with the iron works of agricultural economic society, Xiongnu iron-works are short of production tools and various vessels. The "Nomadic type" iron works found in Xiongnu area date back to the Warring Country period or slightly later. Further research need to be conducted on "Nomadic type" Xiongnu iron works.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.86-95
• /
• 2019

Recently, the applications of carbon fiber have been broader than ever when it comes to such industrials as automobiles, ships, aerospace, civil engineering and architecture because of their lightweight-ness and high mechanical properties. This study analyzed mechanical properties and flexural behavior of carbon fiber reinforced cement composites(CFRC) with different fiber contents and fiber lengths, and also impact resistance by natural drop test on mortar specimens was compared and examined. In addition, contents of carbon fiber(CF) were varied by 0.5%, 1.0%, 2.0% and 3.0%. Fiber lengths was used for 6 mm and 12 mm, respectively. As a result of the test, the flow value was very disadvantageous in terms of fluidity due to the carbon fiber ball phenomenon, and the unit weight was slightly reduced. In particular, the compressive strength was decreased with increasing carbon fiber contents. On the other hand, the flexural strength was the highest with 12 mm fiber length and 2% fiber content. As the results of the impact resistance test, the specimens of plain mortar takes about 2~3 times to final fracture, while the specimens of CFRC is somewhat different depending on the increase of the fiber contents. However, when the fiber length is 12 mm and the fiber content is 2%, the impact resistance was the highest.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.133-140
• /
• 2020

Traction performance of a tractor varies depending on soil conditions. Sinkage and slip of the driving wheel for tractor frequently occur in a reclaimed land. The objective of this study was to develop a tractor suitable for a reclaimed land. Traction performance was evaluated according to soil conditions of reclaimed land and paddy field. Field experiments were conducted at two test sites (Fields A: paddy field; and Field B: reclaimed land). The tractor load measurement system was composed of an axle rotation speed sensor, a torque meter, a six-component load cell, GPS, and a DAQ (Data Acquisition System). Soil properties including soil texture, water content, cone index, and electrical conductivity (EC) were measured. Referring to previous researches, the tractor traveling speed was set to B3 (7.05 km/h), which was frequently used in ridge plow tillage. Soil moisture contents were 33.2% and 48.6% in fields A and B, respectively. Cone index was 2.1 times higher in field A than in field B. When working in the reclaimed land, slip ratios were about 10.5% and 33.1% for fields A and B, respectively. The engine load was used almost 100% of all tractors under the two field conditions. Traction powers were 31.9 kW and 24.2 kW for fields A and B, respectively. Tractive efficiencies were 83.3% and 54.4% for fields A and B, respectively. As soil moisture increased by 16.4%, the tractive efficiency was lowered by about 28.9%. Traction performance of tractor was significantly different according to soil conditions of fields A and B. Therefore, it is necessary to improve the traction performance of tractor for smooth operations in all soil conditions including a reclaimed land by reflecting data of this study.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.47-54
• /
• 2020

A brittle fracture is one of the source of structural damage and can bring a fatal accident. The inner shell of LNG storage tank should be designed and applied to construction by ensure that no brittle crack will occur under -162℃ condition. In point of view of fracture mechanics brittle fracture in the structure could be referred as crack initiation and crack arrest. It should be designed no crack initiation. However, in the unlikely event of a brittle fracture occurring, a back-up function of arresting the brittle crack should be included for the design. In this paper investigated the characteristics of 9% Ni steel thick plates of having a capability of arresting brittle cracks under the thickness of 33 mm, 37mm, 40 mm. First, charpy test has performed to evaluate the fundamental brittle impact fracture property of 9% Ni steel under the temperature of 24℃, -162℃ and -196℃. In addition, Duplex ESSO tests were also performed under -196℃ to evaluate the capability of crack arrest for 9% Ni steel. From the experiments results, it was confirmed that all the thickness of 9% Ni steel plates exhibits sufficient brittle crack arrest fracture toughness for the application of LNG storage tank as a inner shell.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1295-1303
• /
• 2022

As the role of water distribution networks (WDNs) becomes more important, identifying abnormal events (e.g., pipe burst) rapidly and accurately is required. Since existing approaches such as field equipment-based detection methods have several limitations, model-based methods (e.g., machine learning based detection model) that identify abnormal events using hydraulic simulation models have been developed. However, no previous work has examined the impact of data uncertainties on the results. Thus, this study compares the effects of measurement error-induced pressure data uncertainty in WDNs. An artificial neural network (ANN) is used to predict nodal pressures and measurement errors are generated by using cumulative density function inverse sampling method that follows Gaussian distribution. Total of nine conditions (3 input datasets × 3 output datasets) are considered in the ANN model to investigate the impact of measurement error size on the prediction results. The results have shown that higher data uncertainty decreased ANN model's prediction accuracy. Also, the measurement error of output data had more impact on the model performance than input data that for a same measurement error size on the input and output data, the prediction accuracy was 72.25% and 38.61%, respectively. Thus, to increase ANN models prediction performance, reducing the magnitude of measurement errors of the output pressure node is considered to be more important than input node.