• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.5
• /
• pp.33-40
• /
• 2012

To reduce the vulnerability of torsional irregular buildings caused by seismic loads, the torsional amplification factor was introduced by the seismic code. This factor has been applied differently in a variety of seismic codes. In this study, the final static eccentricity, and the lateral and torsional stiffness ratios of buildings designed with different design eccentricities were compared. The increment of the torsional amplification factor resulted in a decrement of the final static eccentricity of the building. However, after reaching the maximum value of this factor, the final static eccentricity of the building increased again. The final static eccentricity of the building designed by multiplying the sum of the inherent and accidental eccentricity by the torsional amplification factor was zero or had a minus value, depending to the position of the vertical element.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.5-14
• /
• 2019

Recently in Korea, researches on seismic analyses for high-rise buildings in a large city have been increasing because earthquakes have occurred. However, the ground conditions are not included in most of seismic researches and analyses on a high-rise building. Also the influence of the predominant period of a seismic wave is not considered in reality. Therefore, in this study, the influence of the predominant period of a seismic wave on the dynamic behavior of high-rise buildings was analyzed based on the complete system model which can consider the grounds. For this purpose, 2D dynamic analyses based on a linear time history analysis were performed using MIDAS GTS NX, a finite-element based program. Dynamic behavior was analyzed in terms of horizontal displacements, drift ratios, bending stresses, and building weak zones. As a result, in overall, the dynamic response of a high-rise building become bigger as the predominant period of a seismic wave become longer. It was also found that the predominant period had a greater influence than other parameters, ground conditions and peak ground acceleration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.157-165
• /
• 2021

Recently, as the spatial resolution of satellite and aerial images has improved, various studies using remotely sensed data with high spatial resolution have been conducted. In particular, since the building extraction is essential for creating digital thematic maps, high accuracy of building extraction result is required. In this manuscript, building extraction models were generated using SegNet, U-Net, FC-DenseNet, and HRNetV2, which are representative semantic segmentation models in deep learning techniques, and then the evaluation of building extraction results was performed. Training dataset for building extraction were generated by using aerial orthophotos including various buildings, and evaluation was conducted in three areas. First, the model performance was evaluated through the region adjacent to the training dataset. In addition, the applicability of the model was evaluated through the region different from the training dataset. As a result, the f1-score of HRNetV2 represented the best values in terms of model performance and applicability. Through this study, the possibility of creating and modifying the building layer in the digital map was confirmed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.16-41
• /
• 2020

Geospatial input setting to represent the reality of spatial distribution or quantitative property within model has become a major interest in earth system simulation. Many studies showed the variation of grid resolution could lead to drastic changes of spatial model results because of insufficient surface property estimations. Hence, in this paper, the authors proposed Monte Carlo Integration (MCI) to apply spatial probability (SP) in a spatial-sampling framework using a three-dimensional point cloud (3DPC) to keep the optimized spatial distribution and area/volume property of buildings in urban area. Three different decision rule based building identification results were compared : SP threshold, cell size, and 3DPC density. Results shows the identified building area property tend to increase according to the spatial sampling grid area enlargement. Hence, areal building property manipulation in the sampling frameworks by using decision rules is strongly recommended to increase reliability of geospatial modeling and analysis results. Proposed method will support the modeling needs to keep quantitative building properties in both finer and coarser grids.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.621-626
• /
• 2006

Today's commercial high resolution satellite imagery such as IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Extraction of 3D building information from high resolution satellite imagery is one of the most active research topics. There have been many previous works to extract 3D information based on stereo analysis, including sensor modelling. Practically, it is not easy to obtain stereo high resolution satellite images. On single image performance, most studies applied the roof-bottom points or shadow length extracted manually to sensor models with DEM. It is not suitable to apply these algorithms for dense buildings. We aim to extract 3D building information from a single satellite image in a simple and practical way. To measure as many buildings as possible, in this paper, we suggested a new way to extract building height by triangular vector structure that consists of a building bottom point, its corresponding roof point and a shadow end point. The proposed method could increase the number of measurable building, and decrease the digitizing error and the computation efficiency.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.3
• /
• pp.193-198
• /
• 2013

This study proposed a map registration method of a building construction plan drawing with shape matching of cadastral parcel polygon. In general, the drawing contains information about a building boundary and a cadastral parcel boundary. The shape of this cadastral parcel boundary should be same as that of the corresponding parcel polygon object in the KLIS continuous cadastral map. Thus, shape matching between two parcel boundary polygons from the drawing and cadastral map could present transformation parameters. Translation and scaling amounts could be obtained by difference of centroid coordinates and area ratio of the polygons, respectively. Rotation amount could be obtained by the rotation that presents the minimum Turning function dissimilarity of the polygons. The proposed method was applied for building construction plan drawings in eAIS for an urban area in Suwon. To assess positional accuracy of map registration, building polygons in registered drawings and aerial photos were compared. According to the accuracy of the cadastral map which is the reference dataset of the proposed method, the RMSE of corresponding buildings' corners was 0.95m and 2.37m in new and old urban areas, respectively.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.32-35
• /
• 2010

바람직한 도시의 건설계획을 위해 2차원 적인 도면의 활용은 한계가 있다. 지방자치단체의 도시계획심의와 민원의 처리에도 3차원 도시모델을 활용하는 추세에 있다. 현장에 가지 않고 사무실에서 업무를 처리하기 위해서는 정밀한 3차원 지형모델이 구축되어야 한다. 또한 건물의 3차원모델링도 신속하고 편리한 방법을 이용해야만 실무에 활용이 가능하다. 본 연구에서는 이를 위해 고해상 고정밀 3차원 지형모델링은 물론 스케치업을 이용한 효율적인 건물모델링방법 강구하여 실무에 적용가능성을 제시하였다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.8
• /
• pp.7-14
• /
• 2003

건물에너지 성능평가 결과의 신뢰성 검증을 위해 가장 먼저 확인하는 요소 중의 하나가 어떠한 기상데이터를 적용했는가일 것이다. 아쉽게도 국내의 경우 아직까지 공인된 표준기상자료가 확립되어 있지 못한 실정이며, 이로 인해 다양한 프로그램을 통한 해석결과의 객관성 확립에 많은 어려움을 겪고 있다. 본 고에서는 건물에너지 성능평가를 위한 시간별 기상자료를 대상으로 국외 및 국내의 개발현황을 고찰하고, 향후 개선방향을 제안하고자 한다.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.298-300
• /
• 2003

미국 PCS 대역 실내 간이 중계기에 사용될 수 있는 소형 안테나를 개발 제작하였다. 이동통신용 PCS 주파수는 CDMA에 비해 2배 정도 높기 때문에 건물 등 실내에서 통신하기에는 감쇠가 심하다. 따라서 건물 밖 신호를 받아서 건물의 특정부분으로 중계해주는 시스템이 필요하게 된다. 이 연구에서는 벽걸이 혹은 사진액자 형태의 중계기에 사용될 수 있는 소형이면서도 대역특성이 넓은 패치 안테나를 제작하였다. A4 크기의 중계기에 적용되는 소형 패치 안테나를 2개 배열하여 측정한 결과 S11의 -10㏈ 대역폭은 1.7 - 2.1㎓로 400㎒ 의 광대역이고, 이득 6 - 8.5㏈i 및 -l8㏈의 F/B 비 특성을 보였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.82.1-82.1
• /
• 2011

최근 국내에서 발생된 대규모 정전사태로 인해 안정적인 전력공급에 대한 국민들의 요구가 커져, 지난 3월 일본 후쿠시마 원전사고 이후 다시 한번 분산전원에 대한 필요성이 대두되어지고 있다. 여러 분산전원 중 연료전지는 다른 에너지원에 비해 에너지의 지속성이 우수하여 가장 안정적인 분산전원 형태의 하나이다. 이에 따라 국내의 경우 우수한 도시가스 인프라로 인해 건물용 연료전지라는 신기술에 대한 국민의 수용성은 점점 높아질 것으로 기대된다. 현재 건물용 연료전지의 경우, 주로 1kW급 연료전지가 시범보급되어 각 가정에 설치되어지고 있으나, 상가, 주유소 및 편의점 등의 상업시설과 생활관 및 소형빌라 등의 집단 주거시설 같은 1kW급 보다 용량을 더 필요로 하는 응용처에 국내에서 개발된 5kW급 연료전지시스템이 적용되어지기를 기대한다. 본 연구에서는 국내 제작된 5kW급 고분자전해질 연료전지시스템의 보급이전에 안전성능 평가를 통해 시스템의 성능 및 안전성 평가결과를 제조사에 피드백 하여 5kW급 건물용 연료전지시스템의 조기 상업화에 앞장서고자 한다. 5kW급 연료전지시스템의 기술개발은 핵심부품인 연료변환기, 스택 및 BOP 기술의 경우 1kW급 연료전지시스템에 적용된 것과는 다른 기술이 필요하고, 단순한 scale-up 과정이 아닌 새로운 기술개발로 제품에 적용시켜야 하는 난점을 가지고 있다. 특히, 연료변환기의 경우 연료 유량의 증가로 인하여 reformer, CO shift 및 Prox 반응기의 유체역학, 열교환 흐름 및 촉매반응 공학적으로 이론을 응용한 새로운 반응기 설계와 제작기술 확립이 선행되어 전체적인 시스템 제작 설계에 반영되어져야 한다. 그러므로 본 연구에서는 연료전지시스템 안전성능 평가를 위해 용량증대에 따른 안전성평가 항목을 검토하고, 5kW급 연료전지시스템평가를 수행하여 시스템의 제품성능, 작동성능 및 계통연계성능에서의 안전성을 확인하였고, 정전 유풍과 같은 이상조건 및 실외 환경에 대한 시스템의 안전성도 확인하였다. 또한 부하운전 조건을 75% 및 50%로 변화시켰을 때 빠른 응답시간과 안정적인 부하변동운전을 확인하였다.