• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.700-705
• /
• 2007

In this study, we observe the application of shape memory alloy(SMA) into smart structures for repeatable actuation, because SMA changes its material properties and characteristics progressively under cyclic loading conditions and finally reaches stable path(state) after a certain number of stress/temperature loading-unloading cycles, so called 'training'. In this paper, SMA wires that have been in a stable state through the training are used. Stress-strain curve of the SMA wire at different temperature levels are measured. In addition, we observe other important effects such as the rate effect according to strain rates for rapid actuation response. The current work presents the experimental test using SMA wire after training completion by mechanical cycling. Through these tests, we measure the characteristics of SMA. With the estimated SMA properties and effects, we compare the experimental results with the simulation results based on the SMA constitutive equations.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.586-591
• /
• 2004

매년 발생되는 절토사면의 붕괴를 사전에 방지하기 위하여 절토사면에 상시 계측시스템을 설치하고 지반의 거동분석을 실시한다. 본 현장의 절토사면 붕괴 규모와 메카니즘을 분석하고 계측 결과와 상호 비교 분석한다. 본 현장은 상시계측시스템 운용 확대 실시에 따른 시험 설치 현장으로 2003년부터 운용 중에 있다. 계측결과에 의하면 강우량과 지반의 거동이 밀접한 관계가 있는 것으로 사료된다. 본 현장의 경우 크게 3번의 지반이동이 있었으며 현재는 안정화 단계에 있는 것으로 사료된다. 그러나, 향후 동절기의 외분 온도 변화와 동반하여 지반의 변동이 우려됨으로 인하여 지속적인 관찰과 자료 분석이 수행되어야 할 것으로 본다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.3 s.258
• /
• pp.373-379
• /
• 2007

In this study, we observe the application of shape memory alloy(SMA) into smart structures for repeatable actuation, because SMA changes its material properties and characteristics progressively under cyclic loading conditions and finally reaches stable path(state) after a certain number of stress/temperature loading-unloading cycles, so called 'training'. In this paper, SMA wires that have been in a stable state through the training are used. Stress-strain curve of the SMA wire at different temperature levels are measured. In addition, we observe other important effects such as the rate effect according to strain rates for rapid actuation response. The current work presents the experimental test using SMA wire after training completion by mechanical cycling. Through these tests, we measure the characteristics of SMA. With the estimated SMA properties and effects, we compare the experimental results with the simulation results based on the SMA constitutive equations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.212-212
• /
• 2014

이트리아 안정화 지그코니아(Yttria-stabilized zirconia, YSZ)는 이트리아의 첨가에 의해 지르코니아에 생성된 산소 빈자리(oxygen vacancy)로 $O^{2-}$ 이온이 전도성을 가지게 되는 특징이 알려지면서 최근 고체산화물 연료전지연구에서 많은 관심을 받고 있다.[1] YSZ를 기반으로한 고체산화물 연료전지의 특성을 개선하기 위해서는 YSZ 내에서의 산소교환 메카니즘을 이해하는 것이 매우 중요하다. 본 연구에서는 $^{18}O2$ 추적 기체(tracer gas) 이용하여 확산된 YSZ박막에서의 산소 확산 거동을 초미세이차이온질량분석기(Nano Secondary Ion Mass Spectrometry, Nano SIMS)를 이용하여 조사하였다. Nano SIMS는 작은 입사 이온빔의 크기를 구현할 수 있고, 다중검출기를 이용하여 높은 질량분해능으로 간섭없이 산소동위원소를 동시에 모두 검출할 수 있는 장점이 있다. 본 발표에서는 Nano SIMS를 이용한 YSZ박막에서의 산소 거동 평가 결과를 상세하게 보일 것이다.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.269-276
• /
• 2007

$TiO_2$-containing pitch fibers were prepared and various stabilization variables were investigated by characterizations of the fibers and behaviors of $TiO_2$ particles in the optimum stabilization conditions. When pitch fiber was stabilized by air at the optimum condition, the fiber weight increased as an increase of the stabilization temperature and a decrease of $TiO_2$ concentration. The carbonization yield was 71~82 wt.%, showing a decrease of the yield with the $TiO_2$ increase caused by the catalytic activity of $TiO_2$ to combustion. During the stabilization, newly developed carbonyl and carboxyl groups were introduced on the fiber surface and cross-linking reactions were progressed resulting the thermosetting property, which was verified by the replacement of hydrogen with oxygen. Pore size of the activated carbon fiber was increased by an increase in $TiO_2$ concentration. In the considerations of the aggregation behaviors of the $TiO_2$ particles, the optimum stabilization conditions of 0.5 wt.% $TiO_2$ containing petroleum-based pitch fiber were suggested as $280^{\circ}C$, 3 hr.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.279-290
• /
• 2008

Landslide, one of the serious natural disasters, has Incurred a large loss of human and material resources. Recently, many forecasting or alarm systems based on various kinds of measuring equipment have been developed to reduce the damage of landslide. However, only a few of these equipments are guaranteed to evaluate the safety of whole side of land slope with their accessibility to the slope. In this study, we performed some experiments to evaluate the applicability of a terrestrial LiDAR as a surveying tool to measure the displacement of a land slope surface far a slope collapsing protection system. In the experiments, we had applied a slope stability method to a land slope and then forced to this slope with a load increasing step by step. In each step, we measured the slope surface with both a total station and a terrestrial LiDAR simultaneously. As the result of Slope Fracturing analysis using all targets, the LiDAR system showed that three was 1cm RMSE on X-axis, irregularity errors on Y-axis and few errors on Z-axis compare with Total Station. As the result of Slope Fracturing analysis using continuous targets, the pattern of Slope Fracturing was different according to the location of continuous targets and we could detect a continuous change which couldn't be found using Total station. The accuracy of the LiDAR data was evaluated to be comparable to that of the total station data. We found that a LiDAR system was appropriate to measuring the behaviour of land slope. The LiDAR data can cover the whole surface of the land slope, whereas the total station data are available on a small number of targets. Moreover, we extracted more detail information about the behavior of land slope such as the volume and profile changes using the LiDAR data.

• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.197-204
• /
• 2007

Tunnel deformation happens by excavation. After installation of support, tunnel is gradually stabilized over time. Effect of excavation on tunnel behavior decreases as increase of distance from face. If the time that the displacement converges by tunnel stabilization is estimated, processes after stabilization can be advanced and economic loss can be reduced. In this study, the distance of displacement convergent point from face in the tunnel constructed on sedimentary rock is estimated using control chart method. As the results of analysis using a control of chart, displacements in a sedimentary rock tunnel are converged within 100 m from each tunnel face.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.1-16
• /
• 2010

The preparation and properties of emulsions stabilized by the adsorption of solid particles at the oil-water interface are reviewed. Comparison is made with the behaviour of surfactant-stabilized emulsions. Many of the properties of Pickering emulsions are attributed to the large free energy of adsorption for particles. The main differences is due to the irreversible adsorption of particles to the interface. Phase inversion from w/o (water-in-oil) to o/w (oil-in-water) can be brought by increasing the volume fraction of water. Hydrophilic particles tend to form o/w emulsion whereas hydrophobic particles form w/o emulsion. The contact angle at the oil-water interface is main parameter to decide the emulsion type. The aspects of stability of Pickering emulsions are in contrast to general emulsions in some points. The possibility using Pickering emulsions for cosmetics is also proposed.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.27-40
• /
• 2021

The construction method to prevent the frost heave or thaw settlement is called the ground stabilization method, and the thermo-syphon is one of the typical ground stabilization methods. The thermo-syphon has recently been developed with a simple analysis model and thermal analysis has been carried out, but the frost heave of frost susceptible soil was not considered. This study was conducted using ABAQUS internal user subroutine to develop the numerical analysis model (Coupled thermo-mechanical) that can simultaneously perform thermal analysis for the temperature change of the soil according to the thermo-syphon and structural analysis to predict the frost heave of the soil accordingly. As a result of the numerical analysis, the frost heave of the soil decreased as the performance of the thermo-syphon increased. As for the main results, when the thermo-syphon which has contain 25%, 50%, and 100% of refrigerant filling ratio was applied, the reduction ratio of the frost heave was 5.5%, 14.4%, and 21% respectively.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.377-383
• /
• 2012

순수한 우라늄 금속은 칩이나 분말로 존재할 경우 반응면적이 넓어 자연 발화할 정도의 산화력을 지니며 산화열이 높기 때문에 운반 및 처리시 화재의 위험성이 있다. 따라서 이들을 장기보관하거나 영구처분시 안정한 형태의 전환이 우선되어야 한다. 외국의 경우 감손우라늄 폐기물을 자연에서 가장 안전한 상태인 산화우라늄의 형태로 산화 처리 후 영구처분하고 있으며, 이를 위하여 우라늄 칩의 산화거동에 관한 연구가 수행 되었다. 우라늄 칩을 안전하게 보관하려면 불활성 분위기를 형성해 주든가 또는 우라늄 칩의 표면에 부동태층을 형성시켜야 한다. 또는 우라늄 칩을 광유속에 넣어 공기나 물이 우라늄 칩에 접촉되지 않는 방법으로 보관하는 것이 바람직하다.