• Magazine of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.95-98
• /
• 2011

최근 국내에서 사회기반시설물에 대한 안전관리 네트워크 통합시스템 구축을 위한 국가핵심과제가 진행되고 있다. 본 연구에서는, 위 과제의 일환으로 진행 중인 철도교량의 구조건전성 모니터링 시스템 구축 및 운용에 대하여 기술하였다. 효율적인 철도교량 모니터링 시스템 구축을 위하여 다양한 종류의 스마트센서가 적용되었으며, 웹 기반의 네트워킹을 통해 외부에서 모니터링 시스템을 원격으로 접속, 제어 할 수 있도록 하였다. 철도교량의 국부 손상을 모니터링 하기 위해 압전센서를 활용한 무선 임피던스 노드를 적용하였고, 구조물 전체의 거동 분석을 위하여 가속도 센서 및 광섬유 센서를 적용하였다. 구조물의 장기 계측을 통한 철도 주행 및 외부 환경에 따른 거동 분석을 수행하였으며, 손상 평가를 위한 신호처리 알고리즘이 적용되었다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.149-156
• /
• 2000

Sedimentation and self-weight consolidation tests in cylinder and large model tank and field measurement such as settlement and pore water pressure at each layer by wireless automatic instrumentation system were carried out to investigate the behaviour of dredged marine clay fill. The consolidation behaviour for each reclaimed layer was analyzed from these measured data and numerical analysis result using finite strain consolidation theory. It was fond from this study that the consolidation behaviour of dredged clay fill is heavily dependent on the filling process.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.139-146
• /
• 2010

This research was conducted to analyze the behavior of the post-tensioned concrete pavement (PTCP) system in which weigh-in-motion (WIM) sensors were installed. One lane of PTCP was constructed after removing the existing asphalt pavement. The frictional resistance between the slab and the underlying layer should be small enough for the PTCP slab to properly have prestresses by tensioning. By performing an experimental construction of PTCP, the friction effects and the longitudinal displacements of PTCP under environmental loads were investigated. Based on the knowledge obtained from the experiments, the actual PTCP sections including WIM sensors were constructed and the curling behavior of the system was investigated. As a result, the behavior of the PTCP system was not affected by the existence of WIM sensors, and the appropriate PTCP system when installing WIM sensors in it could be developed.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.96-106
• /
• 1998

본 연구에서는 복잡한 비선형시스템의 전체적 응답거동의 중요한 (그리고 잠재적으로 유익한) 특성을 상세히 분석하였다. 특히 강성도 및 여기력에 내재된 복잡한 비선형을 소유하는 수중다점계선해양시스템의 분기집합에 내재된 초구조와 혼돈거동의 가능경로에 대하여 해석적 및 수치적으로 분석하였다. 분기는 국부적 안정해석을 통하여 매개변수 영역상에서 확인되었으며, 정상 상태의 분기초구조는 수치해석을 통하여 밝혀졌다. 비선형정도와 해의 차원을 나타내는 공명수를 유도하였으며, 차수공명수를 통해 공명주위의 구조를 밝혔으며 열조화, 울트라조화, 울트라열조화 등과 같은 고도의 비선형 응답의 발생을 예측할 수 있음을 보였다. 결과에서 얻은 초구조는 시스템의 안정성과 이상끌개의 징후를 지배하는 메커니즘임도 밝혔다. 혼돈으로 가는 주기증가의 무한시퀀스에 대한 유연한 변환 외에 돌연한 격발(saddle에 의해 분리된 인접끌개의 충돌)로 인한 혼돈으로의 가능경로도 발견되었으며 이는 수치적으로도 입증되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.47-54
• /
• 2023

In this study, the tensile behavior of concrete specimens reinforced with GFRP (Glass Fiber Reinforced Polymer), BFRP (Basalt Fiber Reinforced Polymer), and CFRP (Carbon Fiber Reinforced Polymer) bars was experimentally analyzed. The tensile strength of the FRP bars is appeared to be similar to the design strength, but the elastic modulus was somewhat lower. Additionally, the specimens for tension stiffening effect were manufacured using OPC (Ordinary Portland Cement) and SFRC (Steel Fiber Reinforced Concrete), with dimensions of 150(W)×150(B)×1000(H) mm. The crack spacing of specimens was most significant for GFRP reinforcement bars, which have a lower elastic modulus and a smoother surface, while BFRP and CFRP bars, with somewhat rougher surfaces and higher elastic moduli, showed similar crack spacings. In the load-strain relationship, GFRP bars exhibited a relatively abrupt behavior after cracking, whereas BFRP and CFRP bars showed a more stable behavior after the cracking phase, maintaining a certain level of tension stiffening effect. The tension stiffening index was somewhat smaller as the diameter increased, and GFRP, compared to BFRP, showed a higher tension stiffening index.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.281-294
• /
• 2012

The current status of the computer codes for the analysis of coupled thermal-hydrological-mechanical behavior occurred in a high-level waste repository was investigated. Based on the reported results on the comparison between the predictions using the computer codes and the experimental data from the in-situ tests, the reliability of the existing computer codes was analyzed. The presented codes simulated considerably well the coupled thermal-hydrological-mechanical behavior in the near-field rock of the repository without buffer, but the predictions for the engineered barrier system of the repository located at saturated hard rock were not satisfactory. To apply the current thermal-hydrological-mechanical models to the assessment of the performance of engineered barrier system, a major improvement on the mathematical models which analyze the distribution of water content and total pressure in the buffer is required.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.139-145
• /
• 2017

Recently, gusts, typhoon and tsunamis have been occurring more frequently around the world. In such an emergency situation, a moored vessel can be used to predict and analyze other vessel behavior, but if the mooring system is destroyed, marine casualties can occur. Therefore, it is necessary to determine quantitatively whether a vessel should be kept in the harbour or evacuate. In this study, moored ship safety in an exclusive wharf according to swell effects on motion and mooring load have been investigated using numerical simulations. The maximum tension exerted on mooring lines exceeded the Safety Working Load for intervals 12 and 15 seconds. The maximum bollard force also exceeded 35 tons (allowable force) in all evaluation cases. The surge motion criteria result for safe working conditions exceeded 3 meters more than the wave period 12 seconds with a wind speed of 25 knots. As a result, a risk rating matrix (risk category- very high risk, high risk and moderate risk) was developed with reference to major external forces such as wind force, wave height and wave periods to provide criteria for determining the control of capabilities of mooring systems to prevent accidents.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.85-91
• /
• 2002

인공위성을 이용한 위치결정시스템인 GPS(Global Positioning System)는 mm 단위의 정밀도로 정적, 동적 위치관측이 가능한 시스템으로 현재 여러 분야에서 활용이 증가하고 있다. 특히 교량, 댐 등 안전이 요구되는 사회기반 시설물의 동적 거동을 기록하고 감시하는데 있어서 GPS가 새로운 관측시스템으로 주목받고 있으며 이를 실용화하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 GPS를 이용하여 건물의 거동상태를 점검 하는 것을 목적으로 하고 있다. 초고층건물의 거동을 해석하기 위하여 건물 옥상에 GPS, 가속도계, 풍향계, 풍속계를 설치하였다. GPS와 가속도계를 이용하여 건물의 변위 및 가속도를 5Hz로 관측하였다. GPS를 이용한 변위관측은 1시간, 1분, 1초 등의 간격으로 3차원 변위를 계산하였으며, 계산된 3차원 변위를 가속도계, 풍속계, 풍향계와 연계하여 해석하였다. 대상 건물에 대한 최대 변위를 관측한 결과 시공 단계에 따라 큰 차이를 보였으며 건물의 안정성을 평가할 수 있는 척도인 건물의 고유 진동수의 경우 약 0.2Hz의 값을 얻을 수 있었다. 향후 모든 센서들을 통합하여 실시간으로 건물을 모니터링할 수 있는 시스템을 개발할 경우 건물의 안정성 해석 및 유지보수에 본 연구가 큰 기여를 할 수 있을 것으로 사료된다.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.5
• /
• pp.5-11
• /
• 2020

Outliers detection and elimination included in field monitoring datum are essential for effective foundation of unusual movement, long and short range forecast of stability and future behavior to various structures. Integrated outlier analysis system for assessing long term time series data was developed in this study. Outlier analysis could be conducted in two step of primary analysis targeted at single dataset and second multi datasets analysis using synthesis value. Integrated outlier analysis system presents basic information for evaluating stability and predicting movement of structure combined with real-time safety management platform. Field application results showed increased correlation between synthesis value including similar sort of sensor showing constant trend and each single dataset. Various monitoring data in case of showing different trend can be used to analyse outlier through correlation-weighted value.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.831-840
• /
• 2019

Recently, the span length of long-span bridges is getting longer. As a result, it has been suggested that a new concept called 'super long-span bridge'. In case of super long span bridges, the structure is being complicated and the importance of structural stability is being emphasized. However, until recently, the most commonly used sensors (dual axis clinometer, anemometer, strain gauge, etc.) have got limit about the bridge monitoring. Consequently, we researched the application of a Global Navigation Satellite System (GNSS) to improve the limit of the existing sensors. In this study, the dual axis clinometer, the anemometer and the strain gauge together with the GNSS were used to analyze the behavior of a super-long suspension bridge. Also, we propose the detailed method of bridge monitoring using the GNSS. This study consisted of three steps. First step calculated the absolute coordinates of the towers and the longitudinal axis direction of the study bridge using the GNSS. In second step, through the analysis of the long-term behavior in shortly after construction, we calculated the permanent displacement and evaluated the stability of main towers. Third step analyzed the behavior of bridge by the wind direction and was numerically indicated. Consequently, the bridge measurement using the GNSS appeared that the acquired data is able to easy processing according to the analysis purpose. If we will use together the existing measurement sensors with the GNSS on the maintenance of the super long-span bridge, we figure each error of measurement data and improve the monitoring system through calibration. As a result, we acquire the accurate displacement of bridge and figure the behavior of bridge. Consequently, we identified that it is able to construct the effective monitoring system.