• Proceedings of the Korean Fiber Society Conference
• /
• 1997.10a
• /
• pp.445-450
• /
• 1997

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.710-716
• /
• 2013

New and renewable energy sources have drawn attention because of climate change. Many studies have been carried out in waste-to-energy field. Fast pyrolysis of waste lignocelluosic biomass is one of the waste-to-energy technologies. Bubbling fluidized bed (BFB) reactor is widely used for fast pyrolysis of the biomass. In BFB pyrolyzer, bubble behavior influences on the chemical reaction. Accordingly, in the present study, hydrodynamic characteristics and fast pyrolysis reaction of waste lignocellulosic biomass occurring in a BFB pyrolyzer are scrutinized. The computational fluid dynamics (CFD) simulation of the fast pyrolysis reactor is carried out by using Eulerian-Granular approach. And two-stage semi-global kinetics is applied for modeling the fast pyrolysis reaction of waste lignocellulosic biomass. To summarize, generation and ascendant motion of bubbles in the bed affect particle behavior. Thus biomass particles are well mixed with hot sand and consequent rapid heat transfer occurs from sand to biomass particles. As a result, primary reaction is observed throughout the bed. And reaction rate of tar formation is the highest. Consequently, tar accounts for 66wt.% of the product gas. However, secondary reaction occurs mostly in the freeboard. Therefore, it is considered that bubble behavior and particle motions hardly influences on the secondary reaction.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.238-240
• /
• 2003

본 연구는 덕음광산 광미시료에 대한 각 pH별 중금속 거동 및 본 지역에서 중금속과 밀접한 관계를 가지는 토양광물인 Mn-함유광물의 용해도의 상관성을 규명하고자 한다. 본 연구를 통하여 Mn-함유광물의 용해도에 따른 중금속의 거동간의 상관관계를 알아봄으로서 광산 주변 지역의 지구화학적인 변화를 예측하고 오염지역 특성을 정확하게 이해할수 있도록 정보를 제공하고자 하였다. (중략)

• Cement Symposium
• /
• no.19
• /
• pp.44-48
• /
• 1991

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.395-398
• /
• 2018

In this work, profound microscale behaviors of block copolymer and polymer blend under electric field were investigated using microscopic methods and compared systematically. To this end, both the block copolymer and blend containing polyacrylonitrile (PAN) and poly(methyl methacrylate) (PMMA) were introduced. The two polymers have a similar dielectric constant. Under an identical experimental condition such as temperature, film thickness, field intensity, and exposure time, the polymer blend responded more sensitively than the block copolymer. The presence of covalent bond suppressed the mobility of constituents in block copolymer. This study will be essential for future research activities regarding behaviors of polymeric materials under external fields.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.252-257
• /
• 2000

연구 결과를 간단히 요약하면 다음과 같다. 1) 온천 목적으로 개발된 국내 심부 암반 지하수(조사 대상 시료수 419개)는 화강암 및 화강편마암 지역에서 가장 높은 불소 함량을 보이며, 최소 75% 이상의 시료에서 먹는 물 수질 기준을 초과하였다. 2) 화강암 및 화강편마암 지역의 심부 지하수 내 불소 함량은 특히 Na-HCO$_3$ 유형의 지하수에서 높게 나타났는데, 이 유형의 지하수 수질은 사장석, 흑운모를 위시한 규산염 광물의 비조화 용해 반응에 의해 조절된다 이들 지하수는 비교적 깊은 관정심도를 나타내었다. 3) 백악기 화강암과 물과의 용출 반응 실험 결과, 전암 분말과의 반응에서는 최대 7 mg/l의 불소가, 흑운모의 용출 실험에서는 최대 35 mg/1의 불소가 용출되었다. 형석의 포화지수는 비교적 반응 초기에 침전 조건에 근접한 반면, 흑운모의 포화지수는 지속적으로 용해 조건에 놓여 있음을 확인하였다. 따라서, 국내 화강암 지역 심부 지하수 내의 불소는 대부분 흑운모의 비조화 용해 반응에 의해 용출되며, 용출 이후에는 형석의 용해/침전 평형 반응에 의해 그 농도가 조절되는 것으로 확인된다. 4) 앞으로, 보다 자세한 평형 열역학적 해석과 다른 이온종과의 상호 관계 규명 및 광물학적 검토를 통하여 불소의 기원과 거동에 관한 보다 정확한 해석을 시도할 계획이다.

• Journal of Korea Foundry Society
• /
• v.27 no.1
• /
• pp.31-35
• /
• 2007

In order to develop the semi-solid forming technology for magnesium alloy the rheological and thixotropic behavior of Mg alloy slurry with varying shear rates and cooling rates was investigated and simulated with considering the viscosity based on microstructures and processing variables. The viscosity of slurry of Mg alloy (AZ91D) in semi-solid region was exponentially increased with a solid fraction, and was decreased with increasing a shear rate. In order to analyze precisely the rheological behavior, the ANYCAST program modified with the Carreau model and the different heat transfer coefficient between the cast and mold was used to simulate the flow behavior of Mg semi-solid slurry during the injection into a casting mold in a high pressure diecasting machine. The simulated rheological behavior of Mg alloy slurry was matched well with the experimental results.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.588-593
• /
• 2022

The effects of P₂O₅-doped on the surface of MgO particles on hydrolysis, water repellency, and insulation behavior were investigated. P₂O₅-doped MgO has exhibited a unique electrical property, which is significant insulation behavior due to both the suppression of the hydrolysis reaction by P₂O₅ and water repellency. Therefore, the insulation behavior was inversely proportional to the hydrophilicity and the Mg(OH)₂ and OH^-charge transfer ratio by the surface hydration reaction of MgO. The insulation of MgO according to aging was strongly influenced by the surface hydration reaction, the band gap of the added dopant species, and the hydrophilicity and hydrophobicity of the dopant. Finally, it was to show electrical insulation by inhibiting the surface hydration reaction of the hydrophilic MgO, which has a great potential for use in heat transfer medium applications.

• Resources Recycling
• /
• v.7 no.5
• /
• pp.19-25
• /
• 1998

High temperature thermal behaviors of EAF dust by coke at initial reaction stage were studied to obtain the fundamental data of EAF dust treatment process, that is Extended Arc Plasma Furnace System called RAPID system. In this study thermal behaviors including calcination of limestone, devolatilization of EAF dust itself, and reduction & devolatilization of mixture(EAF dust : coke : limestone = 80 : 10 : 10 wt.%) were investigated as functions of reaction temperature (1000~1300$^{\circ}C$) and reaction time (3~12 min), considering the 180% equivalence of carbon reduction and 1.7 bacisity for optimum reduction and melting of EAF dust in the RAPID system. Size of sample was about below 0.1 mm for these experiments. Limestone was completely calcined at above 1100$^{\circ}C$ within 1 minutes. In the case of devolatilization of EAF dust itself, weight loss of EAF dust was about 14% at 1300$^{\circ}C$ and 12 minutes, and partial sintering and melting were found in part of sample. Weight loss of mixtures increased with increasing reaction temperature and time, about 46% weight loss in it was occurred at 1300$^{\circ}C$ and 12 minutes. From these weight losses showing devolatilization and reduction of EAF dust, the treatment time of EAF dust inside.

• Journal of the Korean Society of Safety
• /
• v.8 no.3
• /
• pp.83-90
• /
• 1993

직류 아아크 용접시 아아크 프라스마와 용융 금속 사이의 계면에서 일어나는 전기 화학 반응이 용착금속 내의 산소와 질소의 함량에 미치는 영향이 고찰되었다. 열 화학 반응 뿐만 아니라 전기 화학 반응도 용접부의 산소 및 질소의 함량을 결정하는 중요한 반응 메카니즘이라는 것과 전기 화학 반응의 양을 결정하는 것은 단위 면적당 통과하는 전류의 양을 조절하는 용접 전류와 용접 속도라는 것이 실험적으로 입증되었다. 따라서 이 연구 결과는 아아크 용접시 적당한 용접 조건의 선택뿐만 아니라 용접 재료의 설계 또는 선택에 중요한 지침을 준다.