• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.427-428
• /
• 2022

최근 대규모 항만 건설 및 기존 부두 리모델링과 같은 해안 공간 구조물 확충사업이 활발하게 진행되고 있으며 항만 구조물 거동 장기계측을 위한 센서에 대한 관심도 높아지고 있다. 기존의 항만에 적용한 전기식 센서들은 수개월 정도 단기간의 구조물 거동 측정은 가능하지만 수년 이상의 장기계측 시 염수분에 의한 부식 및 내구성에 취약하기 때문에 원활한 측정에 한계점이 있고 센서 설치를 위한 항만 외곽지역 구조물과 육상전원공급설비 배전반 사이의 거리로 인하여 긴 연장의 횡단로 가설전선 보호대 등을 설치해야 하는 어려움이 있다. 따라서, 본 연구에서는 항만 구조물 거동 장기계측을 위해 기존 전기식 센서들의 부식문제점을 파악하여 해수용 4종 센서 IoT 모듈 패키징을 설계하고 외부 전원공급 방해 영향을 최소화한 태양광 발전을 적용한 항만 구조물 거동 계측 시스템을 제안하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.586-591
• /
• 2004

매년 발생되는 절토사면의 붕괴를 사전에 방지하기 위하여 절토사면에 상시 계측시스템을 설치하고 지반의 거동분석을 실시한다. 본 현장의 절토사면 붕괴 규모와 메카니즘을 분석하고 계측 결과와 상호 비교 분석한다. 본 현장은 상시계측시스템 운용 확대 실시에 따른 시험 설치 현장으로 2003년부터 운용 중에 있다. 계측결과에 의하면 강우량과 지반의 거동이 밀접한 관계가 있는 것으로 사료된다. 본 현장의 경우 크게 3번의 지반이동이 있었으며 현재는 안정화 단계에 있는 것으로 사료된다. 그러나, 향후 동절기의 외분 온도 변화와 동반하여 지반의 변동이 우려됨으로 인하여 지속적인 관찰과 자료 분석이 수행되어야 할 것으로 본다.

• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.229-240
• /
• 2023

Instruments are installed in soft ground improvement projects to manage economic and safe construction. When analyzing data, the amount of settlement data over time can be used to understand the overall ground settlement behavior, but it is difficult to analyze the interrelatedness between measurement points. Therefore, to analyze the relative compressive settlement behavior between measurement points, the settlement amount and velocity were processed and defined as the mean settlement difference index (AS_i,j) and the slope difference index (SDI_i,j). Plotted in the mean settlement difference index - slope difference index (AS_i,j-SDI_i,j) coordinate system. As a result of the analysis of the relative compaction subsidence behavior between the measuring points, the relationship between the measuring points in the average subsidence difference index - slope difference index coordinate system moved to area 1 as the compaction was completed. By continuously plotting the movement path of the observation point in the corresponding coordinate system, the relative settlement behavior between the measurement points was analyzed, and it was possible to check whether the settlement behavior of the two measurement points was stable or unstable depending on the direction of the path.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.9-10
• /
• 2014

구조물 계측 및 유지관리에 포함되는 계측센서, 계측장비, 전산장비, 통신장비, 소프트웨어 등은 구조물 수명에 비해 비교적 짧은 내구수명을 가지기 때문에 공용 기간 중 지속적으로 교체/변경이 요구되고 있으며, 소프트웨어 또한 분석기술의 향상과 정보통신기술의 발전 등을 계속해서 반영해야 하므로 일정기간마다 모니터링시스템에 대한 업그레이드 작업이 요구되고 있다. 그러나, 기존에 개발된 시스템은 구조물 관리자에 의한 일부 하드웨어와 분석 알고리즘의 변경이나 업그레이드가 쉽지 않고 모니터링 시스템의 구축에 활용된 프로그램 내부구조 파악이 어려워 원 개발자의 지속적인 지원에 의존해야한다. 본 논문에서 제안된 모바일 클라우드 기반 구조물 유지관리계측 통합모니터링시스템에서는 구조계가 평상시나 특수한 상황에서 장 단기적으로 어떠한 거동을 보이고 있는지를 분석하고, 이를 토대로 향후의 거동이 어떻게 될지 예측하기 위해서 확률과 통계기법의 적용을 통해서 구할 수 있는 새로운 데이터 분석 기법을 적용하였으며, 모바일 클라우드 기반으로 데이터를 수집하고, 많은 데이터 양 및 데이터 신뢰도 수준에서 건전성평가를 할 수 있는 새로운 개념의 구조물 거동계측 통합모니터링시스템 설계로 기존의 단점을 해결할 수 있도록 개선하였다.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.5-24
• /
• 1998

Two instrumented full scale tieback walls in sand were constructed at to Geotechnical Experimentation Site located on the Texas A 51M University Riversic Measurements were obtained from the one row anchor wall and from the two row at different times during construction. The measured performance of the tieback walls is presented and investigated. The these walls at different construction stage is evaluated with respect to lateral wall. settlement of the ground, bending moment of the wall. axial load distribution and anchor load variation. The fundamental mechanism of a tieback wall in sand is and explained with the measurements.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.27-35
• /
• 2010

The structures built under the groundwater level are affected by the buoyancy force, which is hydrostatic pressure in the up direction. Recently, buoyancy-resistant anchor method has been applied in many cases of the construction of the important structure of large size, which is built under the groundwater level so that it takes high uplift pressure. Even if the construction cost of the method is very high, it surely increases the safety rate. However, the diagnosis of the performance of the buoyancy-resistant permanent anchor and the investigation of resistance mechanism are still insufficient. Especially, the long-term behavior of the anchor has not been studied well due to the difficulty in observation procedure. The contribution of this paper is the establishment of reasonable design methodology. We have measured anchor axial forces for 10 years after the construction, by using an automated measurement and a manual measurement by establishing a load cell in anchor head. Through the data collected from the measurements, we analyze the construction-step behavior of the anchor according to the self-weight variation of the building and the long-term behavior (i.e. movement within 10 years after the construction) of the anchor according to the passage of time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.29-35
• /
• 2019

In this paper, a low-cost dynamic measurement system using the RGB-depth camera, Microsoft $Kinect^{(R)}$ v2, is proposed for measuring time-varying free surface motion of liquid dampers used in building vibration mitigation. Various experimental studies are conducted consecutively: performance evaluation and validation of the $Kinect^{(R)}$ v2, real-time monitoring using the $Kinect^{(R)}$ v2 SDK(software development kits), point cloud acquisition of liquid free surface in the 3D space, comparison with the existing video sensing technology. Utilizing the proposed $Kinect^{(R)}$ v2-based measurement system in this study, dynamic behavior of liquid in a laboratory-scaled small tank under a wide frequency range of input excitation is experimentally analyzed.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.279-290
• /
• 2008

Landslide, one of the serious natural disasters, has Incurred a large loss of human and material resources. Recently, many forecasting or alarm systems based on various kinds of measuring equipment have been developed to reduce the damage of landslide. However, only a few of these equipments are guaranteed to evaluate the safety of whole side of land slope with their accessibility to the slope. In this study, we performed some experiments to evaluate the applicability of a terrestrial LiDAR as a surveying tool to measure the displacement of a land slope surface far a slope collapsing protection system. In the experiments, we had applied a slope stability method to a land slope and then forced to this slope with a load increasing step by step. In each step, we measured the slope surface with both a total station and a terrestrial LiDAR simultaneously. As the result of Slope Fracturing analysis using all targets, the LiDAR system showed that three was 1cm RMSE on X-axis, irregularity errors on Y-axis and few errors on Z-axis compare with Total Station. As the result of Slope Fracturing analysis using continuous targets, the pattern of Slope Fracturing was different according to the location of continuous targets and we could detect a continuous change which couldn't be found using Total station. The accuracy of the LiDAR data was evaluated to be comparable to that of the total station data. We found that a LiDAR system was appropriate to measuring the behaviour of land slope. The LiDAR data can cover the whole surface of the land slope, whereas the total station data are available on a small number of targets. Moreover, we extracted more detail information about the behavior of land slope such as the volume and profile changes using the LiDAR data.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2004

The failure of cut slopes frequently occurs particularly during the thawing season and the rain season in summer. This study interpreted data collected from site to which a real-monitoring system was applied in order to analyze the causes of ground behaviors and to forecast future slope failure. As for research methods, this study analyzed the size and mechanism of failure by integrating the results of field surveys and measurements. Furthermore, it analyzed data transmitted by the monitoring system installed in the a result, three times of ground displacement occurred as well as a number of partial tension cracks. The cut slope composed of sandstone and siltstone started its initial behavior as a result of torrential downpour and the loss of support of the substructure. For quantitative analysis of the characteristics of ground behavior, this study measured 5 lateral lines. According to the result of the measurement, displacement happened little in the section to which countermeasure had been applied, but displacement of maximum 400mm happened in the section to which countermeasure had not bee applied. The analysis of data on displacement and rainfall suggested a close relationship between ground behavior and rainfall. According to the result of stability interpretation along with the change of ground saturation, stability rate appeared to be less than 1.0 when ground saturation is over 55%. Although the current trend of ground behavior is at a stable stage falling within the range of tolerance, it is considered necessary to continue monitoring and data analysis because ground displacement is highly possible with the change of temperature during the winter.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2015

Several sensor systems are used to estimate and predict the slope behaviors, however though slope sensing systems are much up-to-dated compared to before, they are mainly focused on the hardware developing. It means the analyzing software is deficient to apply the examining slope behavior for slope stability. In real case, slope behavior shows the 3-dimensional movement and failure; however the modeling methods for 3-D behavior are more difficult and need more variables. 1-D analysis shows only the length variation, however the real slope makes the 3-D behaviors. To fix the 3-D space coordinate, three values should be determined such as length, horizontal angle and vertical angle. Therefore if the 3-D coordinate system were composed by the points considered of two directions and length, the 3-D space could be separated into horizontal plane and vertical plane. The data from DY-slope in Chungbuk province was analyzed to the developed 3-D coordinate system. It is concluded from the results of 3-D analysis, the slope is generally moving to transverse direction, also the displacements are happening to road and vertical direction at the same time. Presently, the accumulated displacement between sensing points shows small value within 4.3 cm, and the displacements of all sensing points show the similar directions and magnitudes.