• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.71-72
• /
• 2013

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.224-230
• /
• 1998

The relationships between R-H curves of gaint magnetoresistance (GMR) spin valve trilayer films and M-H curves of each magnetic layer consisting of the trilayer films were analyzed and simple formula representing the relations between the curves were suggested for theoretical analysis and study of magnetoresistance (MR) in those films, especially where the MR is from the difference of coercivity. Using two kinds of NiFe/Cu/Co films, which had been deposited on Cu(50 $\AA$)/Si(111, 4$^{\circ}$ tilt-cut) and Cu(50 $\AA$)/glass, R-H and M-H curves were measured and compared with the calculated ones, which were obtained by appying the M-H curves of single NiFe and Co films, deposited on the same substrates, to the previously reported single-domain and multi-domain models. The calcuated ones were well consistent with the measured ones and the suggested simple relationships between R-H and M-H curves are thought to be very useful for the deep understanding of MR behavior and the reasonable approach to improve MR properties in GMR spin valve trilayer films.

• Journal of the Korean Magnetics Society
• /
• v.23 no.3
• /
• pp.98-103
• /
• 2013

The magnetic easy axis of the ferromagnetic layer for the dual-type GMR-SV (giant magnetoresistance-spin valve) having NiFe/Cu/NiFe/IrMn/NiFe/Cu/NiFe multuilayer structure controlled by the post annealing treatment. The magnetoresistive curves of a dual-type IrMn based GMR-SV depending on the direction of the magnetic easy axis of the free and the pinned layers are measured by the different angles for the applied fields. By investigating the switching process of magnetization for an arbitrary measuring direction, the optimum annealing temperature having a steady and isotropy magnetic sensitivity of 2.0 %/Oe was $105^{\circ}C$. This result suggests that the in-plane orthogonal magnetization for the dual-type GMR-SV film can be used by a high sensitive biosensor.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.162-163
• /
• 2002

거대자기저항(GMR) 분야에서 높은 GMR 값을 보유하는 것은 주요 관심사이다. Egelhoff와 연구자들은 산소를 이용하여 스핀밸브 박막의 표면을 산화시켜 유도 전자들의 Specular 산란 효과를 보고하였으며, 강자성층과 산화층 사이의 계면에서 specular 반사가 이루어져 GMR의 향상을 가져온 것으로 보고 있다[1,2]. 또한 annealing에 따른 자기적 특성의 향상과에 관한 논문도 보고되어진 바 있다[4]. (중략)

• Journal of the Korean Magnetics Society
• /
• v.9 no.5
• /
• pp.251-255
• /
• 1999

NiFe(60 $\AA$)/Co(0$\AA$$\leq$x$\AA$$\leq$15$\AA$)/Cu(60$\AA$)/Co(30$\AA$) spin valve thin films were prepared on 4$^{\circ}$ tilt-cut Si(111) substrates with a 50 $\AA$ thick Cu underlayer without applying any external magnetic field during the deposition, and the effects of inserted ultrathin Co layer on magnetic anisotropy and GMR properties of the NiFe(60 $\AA$)/Cu(60$\AA$)/Co(30$\AA$) spin valves were investigated. As the ultrathin Co layer was inserted into the NiFe/Cu interface of the spin valves, GMR ratio was increased from about 1.5% to 3.5%, and the easy axis of NiFe(60 $\AA$) layer was rotated by 90$^{\circ}$. Accordingly, it was aligned along the same direction with the easy axis of Co(30 $\AA$)layer. Therefore, squared R-H curves was obtained in the spin valves, which is favorable properties for the digital GMR devices such as MRAM. In order to investigate the change of magnetic anisotropy of NiFe layer of the spin valves in more details,XRD measurement was performed using NiFe(500 $\AA$) and NiFe(500 $\AA$)/Co(10 $\AA$) thin films on the same templates. Strong (220) NiFe peak was observed in both films regardless of the inserted Co layer, so it was thought that the variation of magnetic anisotropy of NiFe layer is from the interface effect, the change of interface from NiFe/Cu to NiFe/Co, rather than the volume effect such as the change of magnetocrystalline effect.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.10a
• /
• pp.62-63
• /
• 2001

• Journal of the Korean Magnetics Society
• /
• v.27 no.3
• /
• pp.82-86
• /
• 2017

The IrMn based GMR-SV films with three different buffer layers were prepared on Corning glass by using ion beam deposition and DC magnetron sputtering method. The major and minor magnetoresistance curves for three different buffer layers beneath the structure of NiFe(15 nm)/CoFe(5 nm)/Cu(2.5 nm)/CoFe(5 nm)/NiFe(7 nm)/IrMn(10 nm)/Ta(5 nm) at room temperature have shown different magnetoresistance properties. When the samples were annealed at $250^{\circ}C$ in vacuum, the magnetoresistance ratio, the coercivity of pinned ferromagnetic layer, and the interlayer coupling field of free ferromagnetic layer were enhanced while the exchange bias coupling field did not show noticeable changes.

• Journal of the Korean Magnetics Society
• /
• v.18 no.5
• /
• pp.174-179
• /
• 2008

The measurement dissolution sensor system using GMR-SV device with magnetic sensitivity of 0.8 %/Oe and Mg-film thick of 200 nm and Mg-foil thick of 50 mm was fabricated and characterized. During the water dissolving process of Mg-film and Mg-foil, the subtle variation of magnetic field by the decrease of current in solenoid was detected by the GMR-SV sensor. The variations of Mg bubble number and ORP as a function of time for three different kinds of edible, tap, and distilled water, are measured and compared. A After 45 min, the speed of fast dissolving Mg was shown the order of edible > tap > DI water. The variation of output magnetoresistance as a function of dissolved time of Mg-film and Mg-foil for edible water, which is composed of mineral content of $0.8{\sim}5.4\;mg/l$ was investigated. The response times for the dissolution in edible water were 5 min and 20 min, respectively. From the measurement of dissolving time and speed for Mg-film and Mg-foil using GMR-SV device, the mineral Mg sensor system in edible water can be possible to develop.

• Journal of the Korean Magnetics Society
• /
• v.21 no.1
• /
• pp.32-36
• /
• 2011

We fabricated a sensor for measuring the water level and water temperature using GMR-SV (giant magnetoresistance-spin valve) device, simultaneously. It could be applied to the medical cooling system of the potassium titanylphosphate KTP) laser system for the therapy of a benign prostatic hyperplasia. The middle point of GMR-SV device was set to the near position of a high magnetic sensitivity with 2.8%/Oe. The sensitivity for the water level and water temperature of the fabricated sensor were $400\;m{\Omega}/mm$ and $100\;m{\Omega}/^{\circ}C$, respectively.

• Ceramist
• /
• v.2 no.4
• /
• pp.35-46
• /
• 1999

GMR 재료의 응용은 매우 광범위하며 크게 세 분야로 대별할 수 있다. 첫째는 자기 재생 헤드로서 $10Gbit/in^2$ 이상의 고밀도 자기기록 기술에서는 필수 불가결한 재료이다. 둘째는 다양한 분야에 응용될 고감도 자기센서 분야이며, 셋째는 집접화된 자기저항메모리(MRAM) 분야이다. GMR 센서를 사용한 자기헤드는 이미 시판되고 있고 기존의 AMR 재료인 퍼멀로이에 비하여 3~20배 이상으로 신호준위가 크고 사용온도 범위에서 선형성 및 열적안정성도 우수한 것으로 보고되고 있다. MRAM의 경우에는 스핀밸브 GMR 및 TMR 소자를 사용한 연구가 한창 진행중이다. GMR 현상은 발견 된지 고작 10년 밖에 되지 않았으나 GMR 자기센서는 이미 상업적으로 개발되어 응용되고 있다. 이러한 실질적인 응용에 유리한 고지를 선점하고 있는 것은 이방성결합형 스핀밸브 다층박막 구조로서 그 내구성과 특성 향상을 위한 연구가 다양하게 시도되고 있다. GMR현상의 발견은 자성재료분야 연구 및 응용에 있어 새로운 전기를 마련하였으며 특히 자성과 이동현상이 연계된 분야로서 소위 "Magneto-electronics" 또는 "Spintronics" 라는 [51] 새로운 미래기술의 장이 열리고 있다. 현재의 반도체 중심의 "Microelectronics" 기술에서는 전자와 전자공공을 이용하는 기술이라면 "Magneto-electronics" 기술에서는 스핀${\uparrow}$ 및 스핀${\downarrow}$의 두 종류의 전자를 이용하게 된다. 자성체와 도체를 접목한 스핀 트랜지스터 또는 자성체와 반도체를 접목한 스핀-polarized FET(field effect transistor) 등의 새로운 개념의 magnetoelectronics 소자가 창출되고 있다. 따라서 자기이동 현상의 기초 연구, 재료 측면의 연구 및 헤드, MRAM, 센서 등의 응용기술연구가 국내에서 활발하게 이루어져 21세기 새로운 자성전자(magneto-electronics)소자 응용에 경쟁력을 키워야 할 것이다.