• 한국재난정보학회 논문집
• /
• 제3권1호
• /
• pp.21-35
• /
• 2007

The principal objective of this research is to evaluate the laboratory mechanical characteristics of color asphalt binders and mixtures. The dynamic shear rheometer (DSR) tests were performed to analyze the viscous and elastic behavior of asphalt binders. Various tests were also conducted to investigate the laboratory performance characteristics of color asphalt mixtures. The test results revealed that the values of $G^*$ and ${\delta}$ of modified color binders were higher than those of the conventional binders at low temperatures. These results are expected to increase the thermal cracking resistance of asphalt mixtures at low temperatures. It should be noted that the color asphalt mixtures with modified asphalt binder can be widely used as a common pavement material with a proper mix design.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.313-318
• /
• 1999

This study is basic research to improve quality of asphalt concrete mixture, to preserve environment, and to recycle waste vinly. The mixing method and proper content of waste vinyl were determined through preliminary mix design. This study performed mix designs using 2 type gradations of aggregate in addtion content of wate vinly. Marshall stability at optimum asphalt content of asphalt concrete mixture addtin wate vinly was satisfied with the specification of the Ministry of Construction and Transportation , and its values indicated that dense grade asphalt concrete mixture containing waste vinyl were higher than common dense grade mixture (control). From this study, it was confirmed that addtion of waste vinyl improved quality of asphalt concrete mixture.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.627-634
• /
• 1997

This is the Study on Application and Manufacture Technique of Cold-Mix, Cold-Laid type Asphalt Concrete using of Polymer modified asphalt the could be constructed easily and economically on damaged road repaireless for seasons. The modified materials for this study are SBS(Styrene-Butadiene-Styrene). SBR (Styrene-Butadiene-Rubber) and PUR(Polyurethane). The Marshall stability and the value of flow and resistance in water stability degree according to the alternation types and weight percent of modified materials were compared and evaluated on this study. The results of the study show that PUR modified asphalt have improvement of over 150% Marshall stability in AI MS-14 standard and they are evaluated to have the easiness of storage and better working efficiency compared with other types of modified asphalt compound.

• 한국재난정보학회 논문집
• /
• 제6권1호
• /
• pp.10-24
• /
• 2010

In this paper, warm asphalt binder was proposed as a substitute for the polymer-modified asphalt binder to get higher viscosity than that of the polymer-modified at the same temperature. Performance grade test and rotational viscosity of warm asphalt binder were conducted to evaluate the property variations due to the addition of admixture. Research results showed that the viscosity of warm asphalt binder at $100^{\circ}C$ was similar to that of the conventional asphalt binder. The performance and durability of warm asphalt binder were also comparable to those of the polymer-modified. It is considered that the active applications of warm asphalt binder can reduce environmental damages due to less diffusions of carbon dioxide compared to the conventional.

• 한국재난정보학회 논문집
• /
• 제6권1호
• /
• pp.28-43
• /
• 2010

This paper presents the field applications of polymer-modified warm asphalt mixture which can reduce the temperature during the production and field constructions. The amount of fuel consumptions and $CO_2$ diffusions can be reduced by much using the polymer-modified warm asphalt mixture instead of the conventional polymer-modified asphalt mixture. According to the research results, the polymer-modified warm asphalt mixture can be utilized without additional temperature increasement and performance sacrifice during the plant production and public service, respectively. As a result, it is considered that the application of the polymer-modified warm asphalt mixture has the potential of convenience in constructions management and reducing the environmental damages.

• 한국도로학회논문집
• /
• 제4권1호
• /
• pp.149-159
• /
• 2002

본 연구에서는 아스팔트 바인더의 절대점도, 동점도, 침입도, 연화점, PG 고온등급을 이용하여 샌드아스팔트 흔합물의 고속 직접인장강도(DTS1), 저속 직접인장강도(DTS2), 간접인장강도(ITS), 회복탄성계수(MR), 강성지수(SI)를 추정하기 위한 연구를 수행하였다. 여러 가지 혼합물의 특성 중 DTS2가 가장 상관성이 높게 나타났으며 그 다음이 DTS1, ITS, SI, MR 순인 것으로 나타났다. 바인더 성질 중에는 PG 등급이 DTS2와 가장 높은 상관 관계를 보여 PG 고온등급이 높은 바인더를 사용하면 직접인장강도가 어느 정도 우수한 혼합물을 얻을 수 있음을 알 수 있었다. 하지만 각각의 물리적 성질만으로는 신뢰도가 낮아 종합적으로 여러 물성을 이용하여 상관성을 분석하였다. 그 결과 직접 및 간접인장강도는 결정계수가 0.99 이상인 모델을 얻을 수 있었다. 그리고 MR, SI 값의 추정치 모델도 R2이 0.91 및 0.93 이상이어서 상당한 신뢰성을 가지고 물성으로부터 역학적 특성을 추정할 수 있음을 보여준다.

• 한국도로학회논문집
• /
• 제2권2호
• /
• pp.129-138
• /
• 2000

본 연구는 대입경 혼합물의 배합설계와 소성변형 및 균열특성에 관련된 역학적 특성에 관한 연구결과이다. 대입경 혼합물은 1989년 미국 아스팔트기술쎈타의 Kandhal에 의해서 연구되었으며, 일본 및 아랍의 여러 국가에서 포장건설에 사용하고 있다. 이들의 경험과 연구결과에 의하면 대입경 혼합물을 구성하고 있는 골재의 구성은 결합력이 견고하고 바인더가 고온에서 영향을 받지 않아 소성변형에 큰 저항성을 보이는 것으로 알려져 있으나, 실제로 증명할 수 있는 역학적인 시험을 수행한 자료는 없는 실정이다. 본 연구에서는 크리프시험, 회복탄성계수시험, 휠 트래킹시험 및 라벨링 시험을 실시하여 대입경 혼합물의 특성을 분석하였으며 시험 결과를 일반 혼합물 및 개질아스팔트 혼합물과 비교한 결과 대입경 혼합물의 소성변형에 대한 저항성은 매우 우수한 것으로 나타났다.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.61-71
• /
• 2016

PURPOSES: The objective of this study was to determine the optimum ratio of mix design, for a reclaimed asphalt pavement (RAP) content of 100%, for spray injection application. METHODS: A literature review revealed that spray injection is an efficient and cost-effective application for fixing small defective regions of an asphalt pavement. Rapid-setting polymer-modified asphalt mixtures prepared from two types of rapid-setting polymer asphalt emulsion were subjected to Marshall stability and wet track abrasion tests, in order to identify the optimum mix designs. RESULTS and CONCLUSIONS : Different mix designs of type A and type B emulsions were prepared using RAP and virgin aggregates, in order to compare the performance and determine the optimum mix design. The performance of mixtures prepared with RAP was superior to that of mixtures containing virgin aggregates. Moreover, for optimum ratio of the design, the binder content prepared from RAP was set to 1~2% lower than that consisting of virgin aggregates. Compared to their Type A counterparts, type B mixtures consisting of a reactive emulsion performed better in the Marshall stability and wet track abrasion tests. The initial results confirmed the advantages associated with using RAP for spray injection applications. Further studies will be performed to verify the difference in the optimum mix design and performance obtained in the lab-scale test and tests conducted at the job site by using the spray injection machine.

• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.91-102
• /
• 2005

아스팔트 바인더 Stiffness와 혼합물의 변형강도 및 동적크리프 특성과의 상관성 분석을 토대로 혼합물의 소성변형 저항성 (내변형성) 추정을 위한 Kim test의 적용성을 고찰하였다. 본 연구는 골재 2종류, AC 60-80 및 이를 개질한 총 8종류의 바인더로 총 16가지 혼합물을 제조하였다. DSR로 각 바인더의 $G^*/sine\delta$를 측정하였으며 Kim test의 변형강도와 동적크리프 시험의 최종변위(FD)와 동적안정도(DS)를 각 혼합물로부터 측정하였다. 바인더의 $G^*/sine\delta$와 소성변형 관련 3가지 특성($S_D$. FD, DS)과의 상관성 분석 결과 $G^*/sine\delta$와 $S_D$와 상관성이 가장 높은 것으로 나타났다 $(R^2=0.88)$ 이는 혼합물에 내재해 있는 내변형성의 차이를 Kim test가 더 잘 구분해 낼 수 있음을 의미한다. 또한 DS와 $S_D$의 회귀분석 결과, $R^2$이 약 0.84 이상을 보여 변형강도는 동적크리프 시험의 동적안정도와 좋은 상관성을 가짐을 확인하였다. 따라서 본 연구를 통하여 아스팔트 혼합물의 내변형성 평가시 Kim test의 활용 가능성이 매우 높음을 확인하였다.

• 한국도로학회논문집
• /
• 제16권2호
• /
• pp.19-24
• /
• 2014

PURPOSES : The study objective was to evaluate rheology and physical properties of SBS-modified warm-mix asphalt (WMA) binders in comparison with hot-mix asphalt (HMA) binders. METHODS : Four different SBS polymers were used to prepare polymer-modified asphalt (PMA) binders, and three different warm-mix additives (WAD) were used to prepare a total of 12 WMA PMA binders. The kinematic viscosity was measured at 115, $135^{\circ}C$. The PG was determined using DSR and BBR. The pass/fail (P/F) temperatures for high and low PG grading were evaluated for HMA PMA and WMA PMA binders. RESULTS : PG 76-22 binders could be prepared by modifying the base binder (PG 64-22) using 4.5 wt% of SBS. The kinematic viscosity (KV) of SBS PMA was increased by 3 times higher than that of base asphalt. The SBS PMA with WAD showed 10% lower KV than that of the normal SBS PMA at $115^{\circ}C$ The high P/F temperatures showed almost no difference between HMA PMA and WMA PMA binders. The high P/F temperature showed very high correlations with KV ($R^2$ > 0.97). The result of SBS modification caused increase of low P/F temperature by $2.7^{\circ}C$ on average. CONCLUSIONS : Since the PMA with WAD showed 10% lower KV than normal (HMA) PMA at $115^{\circ}C$, reducing PMA mixture temperature down to a WMA level was possible in this study. The higher KV binders showed the higher P/F temperature. There was almost no change in high P/F temperature due to the use of WAD. The SBS PMA, showing an increased low P/F temperature, might show somewhat poorer performance at low-temperature, even though the lower PG grade was staying at the same level, i.e., $-22^{\circ}C$.