• International Journal of Highway Engineering
• /
• v.4 no.3 s.13
• /
• pp.25-33
• /
• 2002

Most national highways are paved with asphalt. Since increased traffic volume and high temperature have reduced the service life of pavements, modified asphalt pavements or stone mastic asphalt (SMA) have gradually been adopted. However, pavement engineers have difficulty to select pavement types due to lack of standard specifications for these new pavement types. In this study, service lives of general asphalt pavements based on traffic volume were analyzed using the inventory data of pavement management system (PMS) collected for last 10 years. The results showed 9.5 and 5.6 year average service lives for new constructed pavements and overlays, respectively. The traffic volumes for the design life of 10 years was presented based on confidence levels using service life distributions of current pavements. For the confidence level of 90%, 2,300 ESAL was obtained; 1,500 ESAL for the confidence level of 80%. This indicates that modified asphalt pavements should be considered for sections with the higher traffic volume.

• Journal of the Society of Disaster Information
• /
• v.9 no.1
• /
• pp.22-29
• /
• 2013

Warm mix asphalt(WMA), which is produced at lower temperatures than hot mix asphalt, has advantages in reductions of fuel consumption and greenhouse-gas emission. In this study, field tests such as skid resistance, rutting(permanent deformation), and roughness were conducted for analysis of long-term field performance of modified warm mix asphalt pavement. Skid resistance after 20 months represents the result similar to initial performance results but rutting and roughness decreased somewhat depending on the period of performance. Measurement results of permanent deformation and roughness could be acceptable because measured pavement location is bus lane that a lot of buses pass and stop. There were no cracks after 11 months, but some minor cracks were observed after 20 months. These results were influenced by increased crack resistance due to fiber addition.

• 보일러설비
• /
• no.12 s.143
• /
• pp.143-150
• /
• 2005

주택외간의 품격을 좌우하는 요소인 지붕에 주로 사용되는 자재는 기와이다. 과거에는 주로 재래식 한식기와가 사용되었지만 지금은 거의 사용되지 않고 양식기와인 스패니시 기와가 보편적으로 사용되고 있다. 그 이유는 외장재로 많이 사용되는 자재들과 가장 잘 어울리기 때문이지만 외벽에 돌이 사용된 경우에는 천연슬레이트가 더 적합하다. 최근에는 컬라아스팔트 슁글이 지붕재로 각광을 받고 있는데 미려한 외관을 만들 뿐만 아니라 방수효과도 뛰어나기 때문이다. 또 한 장두장 이상 겹쳐져 시공되기 때문에 내구성도 강하고, 강인한 글래스매트나 다공성 원지를 심재로 특수개질 아스팔트를 합쳐 채색된 돌입자로 표면을 처리하여 내후성 · 내변색성도 강하다. 무게도 기와의 1/5이 안돼 구조체의 하중부담을 줄여 안정성을 기할 수 있다. 이외의 지붕재로 금속제품, 유리, 태양열 주택의 집열판 등 부분적인 지붕으로 사용되는 것으로가 한때 유행했던 콘크리트 슬라이브 등을 들 수 있다.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1208-1213
• /
• 2011

The objective of this study is to analyze rut resistance and moisture susceptibility of warm mix asphalt(WMA) mixture. The deformation strength ($S_D$), which is known to have high correlations with the high-temperature deformation resistance of dense grade mixture, was used as a tool, together with wheel tacking (WT) test, for evaluating warm mix asphalt mixture's rut resistance.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.180-185
• /
• 1998

The study was conducted to evaluate the fundamental properties of waste tire asphalt concretes using polymer modified hinder that were made by dry process. The specimens of four types of polymer modified asphalt concretes were prepared, then Marshall test and indirect tensile strength tests were performed on these samples. The results showed that polymer modified waste tire rubber asphalt concrete was acceptable for the material of asphalt pavement surface layer.

• 한국도로학회지:도로
• /
• v.2 no.4 s.6
• /
• pp.37-49
• /
• 2000

이 보고서는 수퍼페이브의 개념으로 설계된 혼합물이 시방규정에 만족하기 위하여 꼭 필요한 혼합물의 생산, 포설 및 다짐에 대한 내용을 정리한 것이다. 이 보고서 단독으로는 큰 의미가 없으며, 기존의 일반적인 혼합물에 사용되었던 훌륭한 시공기술이 동시에 사용되어야한다. 수퍼페이브가 적용됨으로 해서 발생되는 혼합물의 가장 큰 변화는 굵은입도의 혼합물사용 및 보다 많은 양의 모난골재사용 그리고 개질아스팔트의 사용 등이다. 이러한 변화들은 약간의 시공순서의 수정을 필요로 하게 된다. 이 보고서는 이러한 것에 대한 몇 가지 제안을 포함하고 있다.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.220-224
• /
• 2003

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.771-781
• /
• 2006

This Study is about the development of LCC Analysis Model and Evaluation of VE. It was carried out to help the person's intention decision about choosing the pavement construction method that can deal with 'Pavement Life Factor' like Area Character and Traffic Volume efficiently, by considering the total life cycle cost of pavement life cycle happens according to the numbers of public use year. For this, we developed the new LCC Analysis Model by using the Data of Seoul city the representative city in Korea, and carried out VE Evaluation that reflects the opinions of specialists. This Analysis Model consists of cost items that affects directly the choice of pavement construction, except for the common cost items of the various pavement construction. And we investigated the propriety by applying our model to the example line that are used for the public at present. About the base data of cost items that are used for our analysis, we enhanced our model's confidence by using the statistics data of Seoul and the standard data of unit cost calculation.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.21-30
• /
• 2015

PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

• Elastomers and Composites
• /
• v.32 no.3
• /
• pp.166-172
• /
• 1997

The objective in this study was investigated temperature susceptibility and low temperature fracture of rubber modified asphalt. A chlorinated polyethylene elastomer, Tyrin CM0730, was added to 200/300 grade asphalt with 3.0 and 5.0wt% to improve campatibility. The elastomer modified asphalts were analyzed for temperature susceptibility relating to penetration index(PI) and penetration-viscosity number(PVN) as well as low temperature fracture relating to fracture energy $(G_{IC})$. These indices were obtained from the measurements of penetration, viscosity, failure load and modulus. The addition of small amounts of elastomer to the asphalt resulted in a significant increase of both the PI and PVN over an unmodified asphalt. Also, the fracture energy increased with the addition of elastomer to asphalt. These significant improvement at both the high and low temperature result in enhanced performance.