• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.128-134
• /
• 1975

For development of long-term storage method of sweet-persimmons using polyethylene film bags, basic experiment was conducted with 30 boxes of sweet-persimmons in 1973 and the same experiment was extended for industrial application with 2,500 boxes of the persimmons in the cold storage of Jinyoung Sweet-persimmon Association in 1974. Investigation was made on change of the quality by storage period. At the same time, persimmons put in the cold storage test were shipped to market at different time in order to monitor consumer response and commercial feasibility. The followings are conclusion obtained from the result of this experiment. 1. Storage of sweet-persimmon, Buyu, produced in Jinyoung, Kimhae was possible for 1 month at $2^{\circ}C{\pm}1^{\circ}C$ cold storage. This storage period was extended to 4 months until the end of February in case that the fruits were hermetically sealed in P.E. film bags of 0.08 to 0.1 mm thickness. 2. During the storage period of sweet-persimmons packed in the film bags, the loss of weight due to evaporation was effectively prevented with use of the film of bag thicker than 0.04 mm. 3. The storage ability of 3-5 persimmons per small bag was somewhat superior to that of many persimmons packed in the large box of 15kg capacity. 4. The thicker the film of bags, the more $CO_2$ gas was accumulated inside, however, from 1 month after beginning of the storage the rate of $CO_2$ accumulation became very low maintaining the stabilized level of 5-6% at the plot of 0.06-0.08mm thick bags. 5. While the persimmons were in storage, decreased was the content of total sugars, total acids, and vitamin C, of which the phenomenon was remarkable especially with the fruits of non-packed plot. 6. The sweet-persimmons in the film bags subjected to cold storage when shipped to market in their intact condition were more beneficial than when they were shipped out in unpacked condition. The intact fruits packed in the P.E. film bags were able to keep their commercial value for 10days in the outdoor situation. 7. The sweet-persimmons that were packed in the film bags and put in the cold storage had maintained promissing marketability and the economic feasibility was acknowledged when the experimental practice was applied to industrial scale.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.289-293
• /
• 2005

Nowadays there are many sun protection cosmetics including organic or inorganic UV filter as an active ingredient. Chemically stable inorganic sunsEreen agents, usually metal oxides, we widely employed in high SPF products. Titanium dioxide is one of the most frequently used inorganic UV filters. It has been used as pigments for a long period of cosmetic history. With the development of micronization techniques, it becomes possible to incorporate titanium dioxide in sunscreen formulations without whitening effect and it becomes an important research topic. However, there are very few works related to quantitations of titanium dioxide in sunscreen products. In this research, we analyzed amounts of titanium dioxide in sunscreen cosmetics by adapting redof titration, reduction of Ti(IV) to Ti(III) and reoxidation to Ti(IV). After calcification of other organic ingredients of cosmetics, titanium dioxide is dissolved by hot sulfuric acid. The dissolved Ti(IV) is reduced to the Ti(III) by adding aluminum metals. The reduced Ti(III) is titrated against a standard oxidizing agent, Fe(III) (ammonium iron(III) sulfate), with potassium thiocyanate as an indicator In order to test accuracy and applicability of the proposed method, we analyzed the amounts of titanium dioxide in four types of sunscreen cosmetics, such as cream, make-up base, foundation and powder, after adding known amounts of titanium dioxide $(1{\sim}25w/w%)$. The percent recoveries of the titanium dioxide in four types of formulations were in the range between 96 and 105%. We also analyzed 7 commercial cosmetic products labeled titanium dioxide as an ingredient and compared the results with those of obtained from ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry), one of the most powerful atomic analysis techniques. The results showed that the titrated amounts were well coincided with the analyzed amounts of titanium dioxide by ICP-AES. Although instrumental analytical methods, ICP-MS (Inductively Coupled Plasma-Mass Spectrometry) and ICP-AES, are the best for the analysis of titanium, it is hard to adopt because of their high prices for small cosmetic companies. It was found that the volumetric method presented here gat e quantitative and reliable results with routine lab-wares and chemicals.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.431-439
• /
• 2017

This study was conducted to examine the antioxidant activities and physiological activities of mixture extracts (Liriope platyphylla, Schizandra chinensis and Panax ginseng C.A. Meyer) with different extraction mixing ratios (MEC, 2:1:1; ME1, 1:2:1; ME2, 1:1:2; ME3, 1.34:1.33:1.33). The yield of extracts ranged from 25.33 to 33.87%. The total polyphenol and total flavonoid contents of ME1 extracts were 1.01 g/100 g, 0.07 g/100 g, respectively. The total sugar contents of MEC extract was 22.83 g/100 g, respectively. The DPPH and ABTS radical scavenging activities of ME1 extracts at $1,000{\mu}g/mL$ were 26.79% and 21.08%. The superoxide radical scavenging and ferric-reducing antioxidant power of ME1 extracts at $1,000{\mu}g/mL$ were 67.83% and $295.47{\mu}M$, respectively. The functionalities of extracts were investigated with L-132 and RAW264.7 cell lines. The extracts on different mixing ratios did not show the toxicity on L-132 and RAW264.7 cell line in $100-2,500{\mu}g/mL$. The ME1 extract of $1,000{\mu}g/mL$ performed better than other extracts protective effects against oxidative stess in L-132 cells (81.22%) and the ME2 extract at $1,000{\mu}g/mL$ decreased nitric oxide production by $7.48{\mu}M$ which was more potent than other extracts. There results suggest that the ME1 extracts may be a useful functional food material in the food industry.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.1040-1046
• /
• 2010

This research is composed of a series of survey of existing plants species by classifying biotope type of agro-ecosystem of Guksoo village area of Yangpyeong County, to collect and analyze basic data of vegetation analysis for indicators development of agro-ecosystem habitat quality. From the observation area, we found total 141 kinds of tracheophytes (53 Family 114 Genus 124 Species 16 Variety 1 Breed) and they are 3.36% of total Korean tracheophytes (4,191 kinds). Among those 141 tracheophytes, there are 23 kinds of naturalized plants (11 Family 20 Genus 20 Species 2 Variety) and they are 8.61% of total Korean naturalized plants (267 kinds). Among those 141 tracheophytes, they include 0.71% of pteridophyte, 0.71% of gymnosperm, 98.58% of angiosperm. So, most of them are angiosperm. When we classify them according to plant life form characteristics, dormant/diapause type plants include 45 species (31.91%) of annual plant (Th), 19 species (13.48%) of Th (w), 17species (12.06%) of hemicryptophyte (H). Regarding propagation type, as for the Radicoid form, there are 99 species (70.21%) of crumb structure plant, 13 species (9.22%) of $R_4$, 12 species (8.51%) of $R_{2.3}$ are the crumb structure does not make any connection on the ground or under ground. As for the Disseminule form of propagation type, there are 62 species (43.97%) of Gravity dispersal type $D_4$), 23 species (16.31%) of Wind dispersal type ($D_1$), 21 species (14.89%) of $D_{1.4}$. According to this survey of plant distribution rate by plant life form characteristics, we may acquire many knowledge about species composition of sociability, cluster's reaction against environmental elements, space usage and possible species competition in community. It may be very useful basic data for habitat preservation to keep and promote biological diversity.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.341-354
• /
• 2021

A large part of Gapyeong is occupied by Korean pine (Pinus koraiensis) and Japanese larch (Larix kaempferi) plantations. Abies holophylla stands are scattered throughout Gapyeong, but little information on their distribution is available. This study explored the potential of succession from planted species to native A. holophylla in plantations. Trees were inventoried and regeneration of A. holoplhylla and stand management history were examined in Korean pine, Japanese larch, and A. holophylla-dominated stands. The importance percentage of A. holophylla was the highest among species with a range of 36.1% to 79.1% in all stands and the density of A. holophylla in understory (DBH <2 cm or <1.3 m height) ranged from 50 to 5,820 trees ha^-1. Non-metric multidimensional scaling classified stands into four types, AN, AP, AM, and P. The AN type showed a reverse J-shape DBH distribution, which was similar to that in natural A. holophylla stands. Both AP and AM types included Korean pine plantations with A. holophylla seed trees within stands. For AP, A. holophylla competed with planted species in overstory and deciduous broadleaved species in understory. The AM type was once thinned from below, thus stem density in the mid DBH classes was lower than upper or lower DBH classes. The P type consisted of plantations without A. holophylla seed trees. However, understory regeneration of A. holophylla was abundant through seed supply from A. holophylla in adjacent stands. Plantations with A. holophylla seed trees within or in adjacent stands showed vigorous natural regeneration of A. holophylla, highlighting the potential for succession from planted species to native A. holophylla in the Gapyeong area. Further studies can help develop techniques to restore plantations to native species-dominated natural stands using ecological succession.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.498-506
• /
• 2019

This study is based on a coating method that provides utilization value as a micronised powder for cosmetic raw materials using natural minerals buried in Bonghwa, Gyeongsangbuk-do in Korea. The mineral powder name is called Buseok, and chemical name is pumice powder. The results of a study on the efficacy of cosmetics are reported by the development of particulate powder to assess the performance of this powder. First of all, in order to coat the surface of this powder with oil, aluminum hydroxide was coated on the particulate surface and then coated with alkylsilan. In addition, it was coated with vegetable oil to prevent condensation of the powder and increase the dispersion in the oil phase. First; the particle size of pumice powder was from 10 to 50mm having porous holes on the surface of the particles. Second; The components of this powder contained $SiO_2$, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $K_2O_2$, $Na_2O$, $TiO_2$, $TiO_2$, MnO, $Cr_2O_3$, $V_2O_5$. Third: The particles of this powder have a planetary structure and are reddish-brown with porosity through SEM and TEM analysis. Fourth; the far-infrared radiation rate of this parabolic powder was $0.924{\mu}m$, and the radiative energy was $3.72{\times}102W/m^2$ and ${\mu}m$. In addition, the anion emission is 128 ION/cc, which shows that the coating remains unchanged. Based on these results, it is expected to be widely applied to basic cosmetics such as BB cream, cushion foundation, powderfect, and other color-coordinated cosmetics, sunblock cream, wash-off massage pack as an application of cosmetics. (Small and Medium Business Administration: S2601385)

• Korean Journal of Ecology and Environment
• /
• v.52 no.3
• /
• pp.245-265
• /
• 2019

Biotope, which represents the characteristic habitats of living organisms, need to be identified as essential for the efficient creation and sustainable management of urban ecosystems. This study was carried out to provide the basic information for ecological urban planning by analyzing types and attributes of the biotop established throughout the whole area of the Pohang city, a representative industrial city in Korea. The biotop established in Pohang city is composed of 12 types including forests (coniferous, deciduous, and mixed forests), agricultural fields (rice paddy and upland field), green facilities, river, reservoir, bare ground, residential area, public facilities, commercial area, industrial area, roads, and schools. As a result of analyzing the properties according to biotop types, industrial, commercial and residential areas, which represent urban areas, was dominated by introduced vegetation. Moreover the introduced vegetation is usually composed of exotic plants or modified forms for landscape architecture and horticulture rather than native plants, which reflects ecological property of both region and site. As the distance from the urban center increases, the agricultural field showed a form of typical farmland, whereas the closer it is, the more form of greenhouse farming. Natural green spaces were divided into riparian vegetation established along the stream and forest vegetation. Forest vegetation is consisted of secondary forests (seven communities) and plantations (three communities). The urban landscape of Pohang city is dominated by the industrial area. Among them, the steel industry, which occurs large amounts of heat pollution and carbon dioxide, occupies a large proportion. On the other hand, green space is very insufficient in quantity and inferior in quality. This study proposed several restoration plans and further, a green network, which ties the existing green spaces and the green space to be restored as a strategy to improve the environmental quality in this area.

• Korean Journal of Plant Resources
• /
• v.32 no.2
• /
• pp.160-169
• /
• 2019

The this study was carried out to investigate the growth characteristics of wild-simulated ginseng by direct seeding and transplanting cultivation for develop standard cultivation techniques of wild-simulated ginseng. Bonghwa experimental field were confirm to be suitable location environment for cultivation of wild-simulated ginseng. As a result of this study, the germination rate of wild-simulated ginseng was significantly highest when seed size was over 6.5 mm in the spot seeding cultivation. In the case of transplanting, survival rate was significantly increased when the diameter of root was over 10 mm, planting distance was 7 cm, and the thickness of soil covering was less then 2 cm. The result of growth characteristics of wild-simulated ginseng by cultivation type, growth of stem in spot seeding cultivation was showed significantly increased when seed size over 6 mm, seeding number was 3 grains, and the seeding distance was less then 5 cm. Strip seeding cultivation was showed significantly increased in stem and root growth when seeding distance was 30 cm grains and quantity of seeding was less then 23 g. In the case of transplanting cultivation, it's was showed significantly increased in stem growth when diameter of root was over then 10 mm and direction of rhizome was top and bottom. The results of this study was that to clearly establish the techniques of cultivation of managements and it's will be suggest contribute to the industrial activation of wild-simulated ginseng.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.306-318
• /
• 2018

In order to evaluate the seismic capacity of massive vertical type breakwaters which have intensively been deployed along the coast of South Korea over the last two decades, we carry out the preliminary numerical simulation against the PoHang, GyeongJu, Hachinohe 1, Hachinohe 2, Ofunato, and artificial seismic waves based on the measured time series of ground acceleration. Numerical result shows that significant sliding can be resulted in once non-negligible portion of seismic energy is shifted toward the longer period during its propagation process toward the ground surface in a form of shear wave. It is well known that during these propagation process, shear waves due to the seismic activity would be amplified, and non-negligible portion of seismic energy be shifted toward the longer period. Among these, the shift of seismic energy toward the longer period is induced by the viscosity and internal friction intrinsic in the soil. On the other hand, the amplification of shear waves can be attributed to the fact that the shear modulus is getting smaller toward the ground surface following the descending effective stress toward the ground surface. And the weakened intensity of soil as the number of attacking shear waves are accumulated can also contribute these phenomenon (Das, 1993). In this rationale, we constitute the numerical model using the model by Hardin and Drnevich (1972) for the weakened shear modulus as shear waves go on, and shear wave equation, in the numerical integration of which $Newmark-{\beta}$ method and Modified Newton-Raphson method are evoked to take nonlinear stress-strain relationship into account. It is shown that the numerical model proposed in this study could duplicate the well known features of seismic shear waves such as that a great deal of probability mass is shifted toward the larger amplitude and longer period when shear waves propagate toward the ground surface.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.485-496
• /
• 2022

Modern agriculture is being transformed into smart agriculture to maximize production efficiency along with changes in the 4th industrial revolution. However, rural areas in Korea are facing challenges of aging, low fertility, and population outflow, making it difficult to transition to smart agriculture. Among ICT technologies, simulation allows users to observe or experience the results of their choices through imitation or reproduction of reality. The combination of the three-dimension (3D) model and the greenhouse simulator enable a 3D experience by virtual greenhouse for fruits and vegetable cultivation. At the same time, it is possible to visualize the greenhouse under various cultivation or climate conditions. The objective of this study is to apply the greenhouse climate management model for simulation development that can visually see the state of the greenhouse environment under various micrometeorological properties. The numerical solution with the mathematical model provided a dynamic change in the greenhouse environment for a particular greenhouse design. Light intensity, crop transpiration, heating load, ventilation rate, the optimal amount of CO₂ enrichment, and daily light integral were calculated with the simulation. The results of this study are being built so that users can be linked through a web page, and software will be designed to reflect the characteristics of cladding materials and greenhouses, cultivation types, and the condition of environmental control facilities for customized environmental control. In addition, environmental information obtained from external meteorological data, as well as recommended standards and set points for each growth stage based on experiments and research, will be provided as optimal environmental factors. This simulation can help growers, students, and researchers to understand the ICT technologies and the changes in the greenhouse microclimate according to the growing conditions.