• The Hankook-Saengyark Bo
• /
• no.264
• /
• pp.2-2
• /
• 2005

2015년, 국산 한약재(재배$\cdot$채취 중단 우려 - 식약청, '수입의약품 등 관리규정' 일부개정 - 중국산 한약재 농약 범벅 '충격'(소시모, 시중유통 한약재 대상 검사결과)

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.765-774
• /
• 1995

The hot deformation behaviour of particulate reinforced aluminium 6061 Al composite were investigated by hot compression tests in the temperature range from 623K to 823K with strain rate of 10$^{-3}$ ~5.0 S$^{-1}$ . The effect of reinforced particulate volume fraction, mean diameter on the high temperature flow stress has also been studied. Experimental results showed that the increase in the volume fraction of reinforcement contributed to the rising of yield stress, but the stress above the yield point appeared to be steady state at all volume fractions. The apparent activation energy for deformation was 290KJ/mo1 for unreinforced 6061 Al, 327KJ/mo1 for 6061 Al-20vo1.% SiC composite and 531KJ/mo1 for 6061 Al-20vo1.%A1$_2$O$_3$composite. It appeared that $Al_2$O$_3$reinforced composites was more difficult to hot deform.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.435-438
• /
• 1998

Textile composites란 직물, 편성물, 브레이드 등을 사용한 섬유강화 복합재료의 총칭으로서 텍스타일이 지닌 뛰어난 기능을 매트릭스에 부가함에 따라 단일재료로는 얻지 못하는 뛰어난 공업재료를 만들 수 있다. 편성물은 직물이나 브레이드에 비해서, 변형특성도 매우 우수하고 고생산성이다. 복합재료에서 강화재로 편성물을 사용하는 경우, 섬유소재, 편조직, 편환 밀도 등을 고려하는 것에 의하여 편성물 강화 복합재료의 역학적 특성이 달라진다. (중략)

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.223-237
• /
• 1996

플라스틱재료의 강도, 인성, 경직성, 탄성 등과 같은 기계적 특성을 개선시켜 주기 위해 kaoline, talc, sand, quartz 등과 같은 규산염을 첨가하여 복합재료를 만들고자 하는 연구가 상당히 활발하다. 이와 같이 다양한 규산염이 복합재료의 강화재 또는 첨가제로 사용되는 반면에, 규산염가운데 공업적으로 이용도가 가장 높은 montmorillonite는 아직도 복합재료의 강화재로 폭 넓게 이용되고 있지 못한 실정이다. 이론적으로 볼 때, 높은 분자량을 지니는 무기고분자 (예; inorganic montmorillonite)와 유기고분자 (organic polymer)를 gkadbk는 실질적인 무기-유기 결합물질의 생성이 가능할 수 있으며, 이에 대한 연구 또한 시도되고 있다. 이렇게 해서 얻게 되는 무기-유기 복합체, 즉 montmorillonite로 강화된 플라스틱 복합재료 bumper를 사용함으로써 접촉 또는 충돌시 충격완화의 효과를 가져 올 수 있어 안정성이 좋아지고, 내파괴성이 높기 때문에 비강화 플라스틱재료보다 더 오래 사용할 수 있으므로 경제성이 좋을 뿐만 아니라, 폐품의 감소로 인해 환경보호에도 일익을 담당할 수 있다. 따라서, 본 연구에서는 이러한 montmorillonite강화 플라스틱 복합체를 얻기 위해 우선 무기-유기 고분자물질의 형성이 가능한가를 조사분석하였다. 이를 위해 먼저 amontmorillonite의 층사이에서 화학반응이 수행될 수 있는 충분한 공간을 얻고자 Na-Montmorillonite 층사이의 Na+-이온을 긴 알킬사슬을 취하는 유기 양이온으로 치환시켜 주었다; 이렇게 해서 얻은 유기양이온-몬트모릴로나이트 층간화합물 (Organic cation-Montmorillonite Intercalations-complex)내에 유기 단분자 (organic monomer)를 추가적으로 삽입시킨 후, montmorilonite의 층내에서 증합반응시켜 고분자화해 줌으로써 무기고분자와 유기고분자가 서로 결합된 무기-유기고분자 결합물질을 형성하고자 하였다. X-선 및 IR-분석결과 층내에서의 유기단분자의 고분자화 반응이 성공적으로 이루어 졌음이 입증되었다.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.19-25
• /
• 2008

This study was carried out to investigate the bending strength properties of the unreinforced glulam beams and the GFRP laminated glulam beams according to the volume ratio of GFRP. The 7-layer glulam beams ($10cm(b){\times}14cm(h){\times}180cm(l)$) were manufactured, using Larch (Larix kaempferi Carr.) laminae ($2cm(h){\times}10cm(b){\times}360cm(l)$), which were dried to the moisture content of 8% and specific gravity of 0.54. GPRP of 0.1 and 0.3 cm was reinforced between the outmost layer of bottom and next layer. When the glulam beams were reinforced with GFRP at the volume ratio of 0.7% and 2.1%, respectively, the bending strength was increased by 12% and 28%, respectively, in the reinforced beams than in control glulam beams. Also, the GFRP reinforced layer of the glulam beams with GFRP laminations blocked the progression of rupture, and the unbroken part held about 90% of the bending strength. In the results of glue joints test, the block shear strength is higher than $7.1N/mm^2$, the standard of KS F3021, and in the result of delamination, the adhesive strength is good as the water soaking and boiling delamination was less than 5%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.210-210
• /
• 2003

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.201-204
• /
• 1999

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1994.04c
• /
• pp.36-37
• /
• 1994

• Composites Research
• /
• v.16 no.3
• /
• pp.49-57
• /
• 2003

This paper presents the tensile characteristics for carbon/epoxy, carbon/phenolic and silica/phenolic composites under elevated temperature, which are considered for vehicle structure or thermal protection materials. The tensile test was conducted with servo-hydraulic testing machine and high temperature furnace, and the mechanical properties such as tensile strength, elastic modulus and Poisson's ratio were evaluated by using high temperature strain gages. Also, they were compared each other with respect to fiber orientation and temperature effect. These test results were used for designing and analyzing some airframe structures with these composites.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.201-209
• /
• 2011

While consolidants based on tetraethoxysilane (TEOS) have been widely used for the consolidation of decaying stone heritages, TEOS-based consolidants suffer from practical drawbacks, such as crack formation of the gel during the drying phase due to the developed capillary force. We have prepared new TEOS-based consolidants containing flexible (3-glycidoxypropyl) trimethoxysilane (GPTMS) in order to reduce capillary force development during gel drying. In this study, we have prepared TEOS/GPTMS-based consolidants containing ETEOS in order to improve the surface hydrophobisity. The physical properties of the TEOS/GPTMS/ETEOS solution with different hydrolysis were compared with those of the commercial products Wacker OH$^{(R)}$. The contact angle of the surface increased with the addition of the ETEOS, which is higher than that of Wacker OH$^{(R)}$. The sol-gel mechanism was manipulated by the degree of hydrolysis as well as the amount of ETEOS. The properties and the applicability of the developed consolidants for the decayed Korean granites are also investigated.