• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.253-262
• /
• 2017

In lateral projection imaging method of knee joint, a method that adjusts the incidence angle of central X-ray toward the head side to $5{\sim}7^{\circ}$ in true lateral position which is existing recommended is called imaging method A, Method of imaging the central X-ray perpendicular to the horizontal plane of the examination table toward the knee is called imaging method B, and a method in which the central X-ray is perpendicularly applied to the joints while the lateral side of the distal tibia is compensated by radiolucent materials is called as method C. After tests each imaging method to classified study subject respectively, the joint space distance and the distance between lateral and medial condyle of femur were measured and compared as the quantitative index from the three imaging methods. In addition, the convenience of each imaging method was confirmed through questionnaires to practician. According to the result of the quantitative index, there is no statistically significant difference in imaging method A and C(p>0.05). However, imaging method B showed a significant difference in both A and C(p<0.05). As a result of evaluating the convenience of the imaging method, imaging method A was relatively assessed lower in all items than imaging methods B and C, and as a small difference, imaging method B is assessed higher than C. In this study suggested new knee joint lateral projection imaging method, by using a simple support device, could describe joint space as not much different as existing recommended method without some complex process, and could increase convenience of the practician in the process of the imaging.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.73-79
• /
• 2006

Aeration is the most important and indispensable operation unit for the treatment of swine manure using aerobic liquid-composting process. The composting of swine manure depends on biological treatment process, but the highly concentrated ammonia nitrogen is required a pretreatment to expect the appropriate efficiency of the biological treatment process. In this study, pilot experiments have been carried out to estimate of the fit condition about ammonia stripping process as a pretreatment to aerobic liquid- composting. pH adjustment with $Ca(OH)_2$ was economically superior to use of NaOH and optimum pH of ammonia stripping was 12.3, ammonia nitorgen was rapidly removed as pH were increased at $$35^{\circ}C$$. When air stripping is performed before aerobic liquid-stripping, a high initial pH is required for complete ammonia removal and is additional effects such as organic substances, phosphorus, turbidity, and color removal. Stripping process was very efficient in the pretreatment of highly concentrated ammonia nitrogen for composting of swine manure. Emission rate of gaseous ammonia was $0.5355mole\;s^{-1}$ at initial time and $0.0253mole\;s^{-1}$ at finitial time. The fit condition of ammonia stripping in this study were at the temperature of $$35^{\circ}C$$, and the pH of 12.3 during 48 hours.

• Development and Reproduction
• /
• v.13 no.4
• /
• pp.227-237
• /
• 2009

Recently, adipose mesenchymal stem cells (AdMSC) that are similar to bone marrow MSC and blood derived MSC are thought to be another source for stem cell therapy. However, the diseases that can be applied for stem cells therapy are age-dependent degenerative diseases. Accordingly, the present study investigated the growth and differentiation potential to neural cells of human AdMSC (hAdMSC) obtained from aged thirty, forty and fifty. The growth of cells and cell viability were measured by passage and neural differentiation of hAdMSC was induced in neural differentiation condition for 10 days. Our results demonstrated that cell number, viability and morphology were not different from hAdMSC by age and passage. Immunofluorescence analysis of neural cell marker (TuJ1, NSE, Sox2, GFAP or MAP2) demonstrated no significant differences in neural cell differentiation by age and passage. As the number of passage was increased, the mRNA level of MAP2 and Sox2 was decreased in hAdMSC from age of 50 compared to hAdMSC from age of 30. In conclusion, the present study demonstrated that ability of neural cell differentiation of hAdMSC was maintained with ages, suggesting that autologous stem cells from aged people can be applied for stem cell therapy with age-dependent neural disease with the same stem cell quality and ability as stem cell derived from young age.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.108-108
• /
• 2009

Precipitation hardening nickel base alloys strengthened by intermetallic compounds are extensively used to manufacture on the components of the hot section of gas turbine engines. To ensure structural stability and maintenance of strength properties for a long time, nickel alloys are normally subjected to complex alloying with elements to form ${\gamma}'$(gamma prime). Such alloys have a limited weldability, are normally welded in high temperature. However, laser welding have a merit that applies in room temperature as easy control of welding parameter and heat input. In this study, $CO_2$ laser welding is applied on STS304 plate with good ductility and precipitation hardening nickel base alloy (GTD111DS) used blade material. Also, several welding parameters are applied on powder, power and travel speed. There are no cracks in Rene 80 and IN 625 powder when STS304 plate is used. But IN 625 powder has no cracks and Rene 80 have some cracks in welds with GTD111DS substrate. Adjusting of welding parameter is tried to apply Rene 80 having a good strength compare to IN 625. In the result of adjusted welding parameter, optimized welding parameters are set with low power, low feed rate and high welding speed. Tensile strength of GTD111DS substrate with Rene 80 powder is same and over than the one of base metal in room temp and high temp($760^{\circ}C$).

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.184-190
• /
• 2014

Although it is ideal that the sound with the range of 20 ~ 20,000 Hz is produced by the loudspeaker system composing of only one loudspeaker unit, it is almost impossible now. Therefore, the audible frequency range is now produced by the loudspeaker system, which is consisted of more than two loudspeaker units. The multi-way loudspeaker system certainly requires a crossover filter, which is divided the audible frequency into low and high frequency ranges. The crossover frequency of filter usually is in the range of 1 ~ 4 kHz, the frequency range can largely affect to the sound articulation and quality. It is an example that the phase and amplitude at the crossover frequency can be different from each other, due to the variously reasons. Conversely, they can not produce the smooth frequency response due to the different distance between the two loudspeaker units and electrical properties. As a result, the sound articulation and quality can be degraded. Therefore, the phase and amplitude response at the crossover frequency has to be deeply considered, in order to exactly match the woofer and tweeter. In this study, it is proposed the methods which are the flat frequency and phase response to be obtained by adjusting of the delay time between loudspeaker units, and the choice of filter to be considered the roll-off properties of each unit. It is achieved the frequency response with ${\pm}1$ dB, and the sound articulation is also improved.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.567-572
• /
• 1994

Diglyceride was prepared by reaction of hydrogenated beef tallow and glycerol (GL) in the presence of a Pseudomonas lipase. Both substrates were mixed at the ratio of GL/Triglyceride of 0.5 which is the stoichiometric molar ratio for the complete conversion of triglyceride (TG) to diglyceride (DG). DG can be obtained by solid phase-glycerolysis of hydrogenated beef tallow without use of organic solvents or emulsifiers by careful control of reaction temperature. Optimized reaction temperature condition was as follows: An initial incubation at$60^{\circ}C$ for 2h followed by the first temperature shift down to $55^{\circ}C$ for 4h, and then the second shift down to $50^{\circ}C$ for up to 3 days. There was a large decrease in the content of TG during the first $60^{\circ}C$ incubation for 2h. Even a prolonged incubation at $60^{\circ}C$ could not make a change of the composition of the reaction mixture at liquid state. By controlling the temperature lower than $60^{\circ}C$, reaction mixtures were solidified. The reaction temperature at $50^{\circ}C$ below the melting temperature of hydrogenaed beef tallow gave an 71% optimum yield of DG after 72h enzymatic glycerolysis and about 73% of total DG was 1,3-DG.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1019-1026
• /
• 2017

The structural properties of $HfO_2$ films could be improved by calibrating the working pressure owing to the enhanced quality of a thin film. We deposited $HfO_2$ films on glass substrates by radio frequency (RF) magnetron sputtering under a base vacuum pressure lower than $4.5{\times}10^{-6}Pa$, RF power of 100 W, substrate temperature of $300^{\circ}C$. The working pressures were varied from 1 mTorr to 15 mTorr. Subsequently, their structural and optical properties were investigated. In particular, the $HfO_2$ film deposited at 1 mTorr had superior properties than the others, with a crystallite size of 10.27 nm, surface roughness of 1.173 nm, refractive index of 2.0937 at 550 nm, and 84.85 % transmittance at 550 nm. These results indicate that the $HfO_2$ film deposited at 1 mTorr is suitable for application in transparent electric devices.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1757-1763
• /
• 2010

Flywheel energy storage system (FESS) is defined as a high speed rotating flywheel system that can save surplus electric power. The FESS is proposed as an efficient energy storage system because it can accumulate a large amount of energy when it is operated at a high rotating speed and no mechanical problems are encountered. The FESS consists of a shaft, flywheel, motor/generator, bearings, and case. It is difficult to simulate rotor dynamics using common structure simulation programs because these programs are based on the 3D model and complex input rotating conditions. Therefore, in this paper, a program for the FESS based on the 2D FEM was developed. The 2D FEM can model easier than 3D, and it can present the multi-layer rotor with different material each other. Stiffness changing of the shaft caused by shrink fitting of the hub can be inputted to get clear solving results. The results obtained using the program were compared with those obtained using the common programs to determine any errors.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.4
• /
• pp.45-55
• /
• 2015

The stability of the adjcent structures or slopes under blasting is typically evaluated using an empirical vibration attenuation curve or dynamic numerical analysis. To perform a dynamic analysis, it is necessary to determine the blast load and the damping ratio of rock mass. Various empirical methods have been proposed for the blast load. However, a study on representative values of damping ratio of a rock mass has not yet been performed. Therefore, the damping ratio was either ignored or selected without a clear basis in performing a blast analysis. Selection of the dampring ratio for the rock mass is very difficult because the vibration propagation is influenced by the layout and properties of the rock joints. Besides, the vibration induced by blasting is propagated spherically, whereas plane waves are generated by an earthquake. Since the geometrical spreading causes additional attenuation, the damping ratio should be adjusted in the case of a 2D plane strain analysis. In this study, we proposed equivalent damping ratios for use in continuum 2D plane strain analyses. To this end, we performed 2D dynamic analyses for a wide range of rock stiffness and investigated the characteristics of blast vibration propagation. Based on numerical simulations, a correlation between the attenuation equation, shear wave velocity, and equivalent damping ratio of rock mass is presented. This novel approach is the first attempt to select the damping ratio from an attenuation relationship. The proposed chart is easy to be used and can be applied in practice.

• Horticultural Science & Technology
• /
• v.18 no.2
• /
• pp.98-102
• /
• 2000

This experiment was conducted to determine the effect of chemicals and their concentrations, priming temperature and duration, and different germination temperature on germinability of salvia seeds. The highest percentage of germination was obtained with 50 or 100 mM $KH_2PO_4$, or with -0.50 or -0.75 MPa PEG 8000. When number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG) were taken into account, 50 mM $KH_2PO_4$ or -0.50 MPa PEG was most effective for early germination. No seeds germinated when primed in $K_3PO_4$ or NaOH solution. Priming the seeds at $20^{\circ}C$ was better than priming at $15^{\circ}C$ or $25^{\circ}C$. Priming at $20^{\circ}C$ for 4 or 6 days reduced the MDG by 2.3 days compared with nonprimed seeds. Seeds primed with -0.50 MPa PEG at $20^{\circ}C$ showed a high germination percentage with reduced T50 and MDG. When seeds were primed in a mixture of -0.50 MPa PEG and 50 mM $KH_2PO_4$ solution and germinated at $30^{\circ}C$ or $35^{\circ}C$, percent germination was lower than nonprimed seeds. However, the combined treatment retained the priming effect for reducing T50 and MDG.