• Title/Summary/Keyword: 감지기/작동기 시스템

Search Result 33, Processing Time 0.032 seconds

광학식 NC-스케일

  • 김희식
    • Journal of the KSME
    • /
    • v.32 no.6
    • /
    • pp.554-562
    • /
    • 1992
  • 수치제어(NC : numerical control) 기술은 공장자동화를 위한 중요 기술이다. 우리 산업현장에 공장 자동화가 확장되면서 NC 공작기계, 산업용 로봇, 삼차원 좌표측정기 등의 사용이 매우 증 가되고 있다. 이러한 수치제어용 기계에서는 자동 위치제어를 위하여 길이변위와 회전각도 감 지용 센서인 NC 엔코더가 매우 중요한 부품이다. NC 엔코더에는 선형 엔코더(NC-스케일)와 회전 엔코더가 있으며, 각각 직선운동과 회전운동을 제어하기 위해서 필요한 자동화 부품이다. 그림 1에서는 CNC 위치제어 시스템에서 정확한 위치로 이동을 목표로하여 서보 제어할 때 기 계축의 위치를 감지하는 센서가 NC 엔코더임을 보여주고 있다. 선형 엔코더는 직선운동의 변 위를 감지하며 NC-스케일 이라고도 말한다. 우리나라에서는 아직 엔코더 제작기술을 개발하지 못하여 전량수입에 의존하고 있다. 이러한 NC 엔코더의 수요는 해외 시장뿐만 아니라 국내시 장에서도 급격히 증가되고 있으며 국산화 개발이 시급하다. 이 글에서는 엔코더의 종류별 작동 원리를 설명하고 또한 NC-스케일 제조기술을 개발하기 위하여 실험하였던 결과를 정리하고자 한다.

  • PDF

A Design of Greenhouse Control Algorithm with the Multiple-Phase Processing Scheme (다중 위상 처리구조를 갖는 온실 복합환경제어 알고리즘 설계)

  • Daewook Bang
    • Journal of Service Research and Studies
    • /
    • v.11 no.2
    • /
    • pp.118-130
    • /
    • 2021
  • This study designs and validates a greenhouse complex environmental control algorithm with a multi-phase processing scheme that can combine and control actuators according to the degree of change in the greenhouse environment. The composite environmental control system is a system in which the complex environmental controller analyzes the information detected by sensors and operates appropriately actuators to maintain the crop growth environment. A composite environmental controller directs control devices driving actuators through a composite environmental control algorithm, which calculates the values necessary for the operation of the control devices. Most existing algorithms carry out control procedures on a single phase by iteration cycle, which can cause abnormal changes in the greenhouse environment due to errors in output. The proposed algorithm distributes control procedures over multiple phases: environmental control, environmental control, and device operation, and every iteration cycle, detects environmental changes in the environmental control phase first, and then combines control devices that can control the environment in the environmental control phase, and finally, performs the controls to derive the actuators in the device operation phase. The proposed algorithm is designed based on the analysis of the relationship between greenhouse environmental elements and control devices deriving actuators. According to verification analysis, the multi-phase processing scheme provides room to modify or supplement the setting value and enables the control devices to reflect changes in the associated environmental components.

Development of Greenhouse Environment Monitoring & Control System Based on Web and Smart Phone (웹과 스마트폰 기반의 온실 환경 제어 시스템 개발)

  • Kim, D.E.;Lee, W.Y.;Kang, D.H.;Kang, I.C.;Hong, S.J.;Woo, Y.H.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.18 no.1
    • /
    • pp.101-112
    • /
    • 2016
  • Monitoring and control of the greenhouse environment play a decisive role in greenhouse crop production processes. The network system for greenhouse control was developed by using recent technologies of networking and wireless communications. In this paper, a remote monitoring and control system for greenhouse using a smartphone and a computer with internet has been developed. The system provides real-time remote greenhouse integrated management service which collects greenhouse environment information and controls greenhouse facilities based on sensors and equipments network. Graphical user interface for an integrated management system was designed with bases on the HMI and the experimental results showed that a sensor data and device status were collected by integrated management in real-time. Because the sensor data and device status can be displayed on a web page, transmitted using the server program to remote computer and mobile smartphone at the same time. The monitored-data can be downloaded, analyzed and saved from server program in real-time via mobile phone or internet at a remote place. Performance test results of the greenhouse control system has confirmed that all work successfully in accordance with the operating conditions. And data collections and display conditions, event actions, crops and equipments monitoring showed reliable results.

A Study for Performance Improvement of Fire Detector and Sprinkler Head in Apartment Houses (공동주택 화재감지 및 소화성능개선에 관한 연구)

  • Lee, Chae-Won;Son, Bong-Sei
    • Fire Science and Engineering
    • /
    • v.29 no.1
    • /
    • pp.38-44
    • /
    • 2015
  • This study suggested the problems and their improvement measures for the operation of fire detectors and sprinkler heads installed at apartment houses. According to a census on population and housing in 2010, apartment houses account for 71.6% of the total housing facilities. And by fire statistics data of the National Emergency Management Agency, approximately 25.0% of fire accidents and 46.4% of casualties occur at apartment houses every year. Therefore, this study conducted for identifying the causes and characteristics of fire to establish the fire safety improvement measures for apartment houses. And this study was carried out virtual fire simulation at domestic apartment houses. The scenario of the simulation contains a comparative analysis on the operation time of standard sprinkler heads and residential sprinkler heads, heat detectors and smoke detectors. As a result of simulation, it was found that standard sprinkler heads and heat detectors installed at the existing apartment houses should be replaced with residential sprinkler heads and smoke detectors for rapid fire suppression. In addition, sprinkler systems should be considered to be installed for excluded floor at apartment houses. Especially, it is necessary to construct remote inspect systems like advanced countries for efficiency of apartment houses safety management.

A study on the Development of Automatic Drying System of Ginseng (인삼의 자동건조시스템 개발에 관한 연구)

  • Kang, Hyun-Ah;Chang, Kyu-Seob;Chang, Dong-Il
    • Korean Journal of Food Science and Technology
    • /
    • v.25 no.6
    • /
    • pp.764-768
    • /
    • 1993
  • This study was developed a computer-controlled automatic drying system. In order to control automatically the temperature, relative humidity weight of the sample, drying system with computer and connecting parts such as microcomputer, PC-Lab card, Op. Amp., and relay system were developed for controlling the heater, fan, humidifier and dehumidifier. Using this system, drying characteristic mechanism of ginseng were investigated. The increase of drying temperature decreased Hunter L value and increased a and b value. The hardness and shrinkage rate of white ginseng had a increasing tendency with the increase of drying temperature. Crude saponin content was not affected by drying temperature and relative humidity.

  • PDF

Performance of Automatic Guidance System for Combine at Turning and Curved Paths (자율주행시스템을 이용한 콤바인의 무인자율 선회 및 곡선 주행)

  • 최창현;양원준;남궁만준;김용주
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.494-500
    • /
    • 2002
  • 본 연구의 목적은 DGPS와 자이로 센서를 장착하여 무인으로 콤바인을 직선주행, 선회 및 곡선주행, 직진주행 중 1 m 오프셋(offset) 주행시켰을 때, 무인 자율주행의 성능을 분석하고 개선하는데 있다. 콤바인의 무인자율주행 시스템은 콤바인의 현재위치를 인식하고, 주행하고 있는 콤바인의 주행방향을 감지하여 미리 설정된 경로를 따라 자율적으로 주행하며, 주행 중에 장애물이 검출되면 정지할 수 있도록 개발하였다. 콤바인의 무인 자율주행시스템은 DGPS의 입력 신호로부터 콤바인의 현재위치를 결정하고, 자이로 센서의 입력신호로부터 주행방향을 알 수 있다. 또한 장애물의 감지를 위한 초음파 센서, 콤바인의 주행방향을 조정하는 유압 작동부, 좌.우의 조향레버를 조정하는 서보모터 시스템, 마이크로 컴퓨터로 구성된 제어기와 입출력 인터페이스로 구성되어 있다. 콤바인 자율주행시스템의 프로그램은 DGPS 신호, 자이로 센서 등을 수신하는 수신 프로그램, DGPS 신호등으로부터 관련 변수들을 분석하여 콤바인의 조향수준을 결정하고, 유압실린더 등을 제어하는 제어 프로그램과 콤바인의 이동경로를 저장하는 저장 프로그램으로 구성되어 있다. 콤바인의 무인주행 실험결과 RMS 오차는 50 m 직선주행에서 7.52 cm, 20 m 직선주행 후 1 m 오프셋 된 30 m의 직선주행에서 21.85 cm, 20 m 직선주행 후 90$^{\circ}$선회하여 25 m 직선주행에서 7.55 cm, 반지름 23 m의 원주 사분면 곡선주행에서는 25.98 cm로 각각 나타났다. 소 구획의 포장에서 벼는 가로 방향으로 25~30 cm, 세로 방향으로 15~20 cm의 간격으로 심어져 있다. DGPS 신호에 의한 위치 결정을 할 때 자체 오차 10 cm를 고려하여도 콤바인이 직선구간 및 선회구간을 주행하며 수확작업이 가능함을 알 수 있었다. 그러나 곡선구간에서는 최대오차가 65.5 cm로 매우 크게 나타나, 콤바인을 무인 자율주행으로 수확하기에는 어려움이 있는 것으로 나타났다. 실제 포장은 이론적인 완전한 직선보다는 작은 굴곡이 있는 곡선의 형태가 이루어져 있으므로 주행 오차를 감소하기 위해서는 기계시각을 이용하면 보다 정밀한 조향을 이룰 수 있을 것으로 예상된다. 포장에서 DGPS 신호, 자이로 센서 등을 이용한 콤바인의 무인주행 장치는 무인 수확작업을 위한 가능성을 보여주었고, 일부의 센서의 기능을 개선하면 만족한 성능을 나타낼 수 있을 것으로 판단된다.

  • PDF

Control Signal Reconstruction of Non-Linear Systems with Noise Using Neural Networks (신경망을 이용한 비선형 잡음계의 제어신호 복원)

  • 안영환
    • Journal of KSNVE
    • /
    • v.9 no.4
    • /
    • pp.849-855
    • /
    • 1999
  • Neural Networks have shown potential to become an attractive alternative to classic methods for identification and control of non-linear dynamic systems. The purpose of this paper is to present an application of neural networks, that is a neural reconstruction of the input signal of a non-linear unknown system. This basic methodology could be used for practical purpose in several engineering fields. Clearly applications of the proposed scheme can be of interest for physical systems where a complete network of sensors measuring system inputs is not available. It should also be emphasized that the application of the reconstruction scheme is of little or no interest when the analyzed system works and operates at nominal conditions. In fact, only when failures and/or system anomailes occur, leasing to performance degradation and/or shutdown, the application of this scheme is of interest. The paper presents the results of the methodology applied to unknown non-linear dynamic systems and the robustness of the scheme to white and colored system noise was evaluated.

  • PDF

A study on Installation of Facility Monitoring System in Computer Room's (전산실 기반설비감시시스템 구축에 관한 연구)

  • Choi, Woo-hyoung;Kim, Chang-soo
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2013.05a
    • /
    • pp.159-161
    • /
    • 2013
  • Surveillance system that can respond quickly in case of failure to detect various disorders that can occur for a temperature chamber, and fire extinguishing equipment, such as UPS, communication room, and computer room of enterprises and institutions operating in infrastructure, and to systematically study. Major telecommunications equipment and computational facilities to manage, operating in an environment of air conditioners work status, distribution panel and the UPS status and fault status, rapid notification system in case of fire is needed. By identifying the status and problems of disability surveillance on the periphery of the existing computer room's infrastructure management guidelines presented in the next future Conception and systematic surveillance system for staff to refer to when designing considerations associated with data center monitoring system the necessity of the various studies are presented.

  • PDF

Development of the Multichannel Vibration Monitoring System (다채널 진동 모니터링 장치 개발)

  • Hong, Tae-Yong;Park, Soo-Hong
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.11 no.7
    • /
    • pp.671-676
    • /
    • 2016
  • This study is about design for the Rotational Instrument of the Industry factory which is used management safety and maintenance. We developed the multichannel vibration monitering system of the self-diagnosis for middle level CMS(Condition Monitoring System) market, and that system are new features to the expandability and flexibility. Normally one channel is used for treating one signal, but developed instrument can treat four channel with one signal processing card. One rack have redundant power supply and displace and it can check vibration measurement value in field without computer. Bearing fault detection is fundamental of vibration surveillance, but sometimes can not check with vibration velocity and acceleration. So it need the filtering and the amplitude modulation on the acceleration enveloping technology when irregular vibration is happened. We developed the vibration analysis instrument which is applied such technology. And the development prototype shows activated within the vibration error limit.

Improvement in flow and noise performances of small axial-flow fan for automotive fine dust sensor (차량용 미세먼지 센서용 소형 축류팬의 유동과 소음 성능 개선)

  • Younguk Song;Seo-Yoon Ryu;Cheolung Cheong;Inhiug Lee
    • The Journal of the Acoustical Society of Korea
    • /
    • v.42 no.1
    • /
    • pp.7-15
    • /
    • 2023
  • Recently, as interest in air quality in vehicles increases, the use of fine dust detection sensors for air quality measurement is becoming common. An axial-flow fan is inserted in the fine dust sensor installed in the air conditioning system in the vehicle to prevent dust from sinking directly on the sensor. When the sensor operates, the flow noise caused by the rotation of the axial-flow fan acts as a major noise source of the fine dust sensor. flow noise is recognized as one of the product competitiveness of fine dust sensors. In this study, the noise was gradually reduced at the same flow rate by improving the flow performance of the small axial flow fan. First, a virtual fan performance tester consisting of about 20 million grids was developed to analyze the aerodynamic performance of the target small axial-flow fan. In addition, the flow field was simulated by using compressible Large Eddy Simulation for direct computation of flow noise as well as high-accurate prediction of flow rate. The validity of numerical method are confirmed through the comparison of predicted results with experimental ones. After the effects of pitch angle on flow performance were analyzed using the verified numerical method, the pitch angle was determined to maximize the flow rate. It was found that the flow rate was increased by 8.1 % and noise was reduced by 0.8 dBA when the axial-flow fan with the optimum pitch angle was used.