• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1521-1522
• /
• 2011

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.1-12
• /
• 2019

Earthquake can change underground stress condition around the hypocenter and affect the fracture systems of the rocks. In Korea, the M5.8 Gyeongju earthquake on September 12, 2016 and M5.4 Pohang earthquake on November 15, 2017 occurred inside the Yangsan fault zone and possibly affected the fracture systems in the Yangsan fault zone and nearby rock masses. In this study, the characteristics of the fracture system (fracture orientation, number of the fractures, fracture spacing and aperture, dip angle, fracture density along depth, and relative rock strength) of the rocks in the low/intermediate level radioactive waste repository site located in the coastal area of the East Sea are analyzed by the impact of the Gyeongju and Pohang earthquakes using acoustic televiewer data taken from the boreholes at the radioactive waste repository site in 2005 and 2018. As a result of acoustic televiewer logging analysis, the fracture numbers, fracture aperture, and fracture density along depth overall increased in 2018 comparing to those in 2005. This increase tendency may be due to changes in the fracture system due to the impact of the earthquakes, or due to weathering of the wall of the boreholes for a long period longer than 10 years after the installation of the boreholes in 2005. In the borehole KB-14, on the whole, the orientation of the fractures and the average fracture spacing are slightly different between 2005 and 2018, while dip angle and relative rock strength in 2005 and 2018 are similar each other.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.239-245
• /
• 2013

The temperature monitoring of power cable and cable junction point is the necessary link of the safe and reliable operation of the power system. Many kinds of cables and high voltage junction points are easy to exposed continuous vibrations and momentary impulse in industry field especially power plant industries. This system can predict the overheating of the electric cable interface and the possibility of all kinds of accident, and it helps for eliminating the hazards of electric cable interface and provides the effective guarantee for the safety operation. In order to avoid the faults of the inconvenience of installation and maintenance and the high cost of application, this system used small and contactless IR sensor module. The low power consumption is used in the system. The goal of this study is the low cost and on-line reliable monitoring of power cable and junction point temperature.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.87-95
• /
• 2011

To provide regulatory standards and technical guides that are likely to be required for the Fault Monitoring System (FMS), soon to be installed and operated at the Shin-Wolsong NPP #1, 2 site, technical trend analysis was performed for currently operating geodetic and/or earthquake monitoring systems and activities worldwide, resulting in the identification of several items of concern regarding the design, installation, and operation of FMS at Korean sites. The items are as follows: 1) characterization of site-specific properties (including local noise), 2) selection of measuring instruments/design of appropriate sensitivity for the tectonic behavior of the target, 3) data/electricity backup system, 4) cross-checking and/or cross-referencing system to enhance data quality and credibility, 5) transparent data operation and open-to-the-public policy, and 6) long-term operation in a stable environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.67-74
• /
• 2008

This paper proposes, designs and implements an architecture of a server involved with the network camera based video surveillance systems to solve common problems including lack of inter-network operability at the video information sharing, drawback of bandwidth and processing-overhead caused by increase of the number of users, and difficulty of continuous monitoring over changes of network configurations. The proposed saver was designed to manage and service numerous network cameras and users as well as solving the existing problems by providing video distribution facility. Through the empirical study after applying the implemented server to a real video surveillance system we proved that the server can provide reasonable service quality while it processes several hundreds of simultaneous user connections under persisting more than one hundred connections to network cameras. We expect the developed video distribution server to enhance service quality of the large scale video surveillance systems for citizen-wide services such as traffic reporting informatics or natural calamities supporting.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.171-172
• /
• 2009

질감 분류 기술은 패턴인식과 컴퓨터 비전 분야에서 널리 사용되는 기술로서, 최근 들어서는 감시 카메라 시스템에서의 정확한 객체 인식을 위한 회전 변화에 강인한 질감 분류 연구가 진행되고 있다. 본 논문에서는 순환 가보 웨이블렛 필터를 이용한 회전 변환에 강인한 질감 분류 방법을 제안한다. 제안하는 방법은 순환 가보 웨이블렛 필터링된 영상에서 전역 및 지역 특징 벡터를 계산하고 특징 벡터의 차이를 이용한 유사도 측정 판별식으로 질감 분류를 수행한다. Brodatz 질감 앨범을 이용한 실험에서 기존의 방법들보다 2~6% 향상된 질감 분류 비율을 확인할 수 있었다. 제안하는 방법은 질감 기반 객체 인식에 관련된 응용 분야에서 유용하게 사용될 수 있다.

• Journal of KSNVE
• /
• v.15 no.5 s.77
• /
• pp.15-23
• /
• 2005

• Journal of KSNVE
• /
• v.22 no.2
• /
• pp.20-27
• /
• 2012

• The Magazine of the IEIE
• /
• v.8 no.2
• /
• pp.64-68
• /
• 1981

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.43 no.10
• /
• pp.68-73
• /
• 2014